Jump to content
Ultimaker Community of 3D Printing Experts

3D Prints

1,066 files

  1. Full size Velociraptor skeleton

    Here is my full size Velociraptor skeleton. Juste made for the challenge.
    Lenght: ~180cm
    Sculpted with Zbrush.
    Total printing time: ~392h.
    Printer: Ultimaker2+
    Filament: PLA
    Speed: 30mm/s - 50mm/s
    Nozzle: 0,4mm
    Layers: 0,15mm
    Painting : acrylic paint (spray and brushe) 

    324 downloads

       (2 reviews)

    11 comments

    Submitted

  2. Model of Stark Towers as used in 'Avengers Age of Ultron'

    During my spell working in the Art department on 'Avengers Age of Ultron' I was asked by the production designer to build a prop to help dress the interior set of 'Stark Towers' The model was to show the new section of tower that replaced the damaged section from the original film. As I only had 4 weeks to build it (including 3d modelling) we needed to simplify the design a bit, hence the lower portion being in laser cut acrylic.
    Using my trusty Ultimakers I think I pulled off the desired effect, even if it only appeared in the movie for less than a second!

    2,890 downloads

       (2 reviews)

    3 comments

    Updated

       (1 review)

    0 comments

    Updated

  3. "Me and my daddy"

    Hi guys,
    this is one of my sculptures I decided to print with my ultimaker. I sculpted it in VR. You can see 3d model in VR on sketchfab:
    https://sketchfab.com/models/8c4b1f7c1ff54fb6bb9486fbb5b81944
    You can also see more of my work here if you're interested:
    https://www.facebook.com/maciejgliwaart/

    552 downloads

       (1 review)

    0 comments

    Updated

  4. 1/40 Giganotosaurus

    Nozzle : 0.4
    Layer : 0.06
    #dinosaur #giganotosaurus #dino #dinosaurs #figure

    87 downloads

       (2 reviews)

    0 comments

    Submitted

  5. Darwin Barcode

    Design by @lekid
     
    Inspired by a picture found on internet
     
    Printed with Polymaker Polysmooth filament and polished with the Polysher
     
    Then glued on a glass frame of 30cm x 60cm

    43 downloads

       (2 reviews)

    0 comments

    Updated

  6. Predator

    The main bulk was printed on my Ultimaker2 with some of the smaller parts printed on a Form2

    1,888 downloads

       (1 review)

    0 comments

    Updated

  7. Gyro the Dodo by Virtox

    The original dodecahedral kinetic sculpture by Stijn van der Linden a.k.a. Virtox.
    Made of five nested dodecahedra, each one is limited to rotate around its own axis.
    It was printed with dual extrusion on an Ultimaker 3 with water-soluble PVA support material.

    9,687 downloads

       (5 reviews)

    0 comments

    Updated

  8. Boon, The Tiny T-Rex from 3DKitbash

    Boon, The Tiny T-Rex from 3DKitbash

    2,277 downloads

       (5 reviews)

    1 comment

    Updated

  9. Projekt M: 3D Printing

    Friend of my printed a 1/100 scaled modell (400x800x60 /  50 pieces >3000g) of the upcoming Mellowpark in Berlin which is in crowdfunding now.
    https://www.mellowpark.de/
     

    515 downloads

       (1 review)

    1 comment

    Updated

  10. LotusLight

    LotusLight printed in PETG Transparant. Speed 20mm/s, 0,15mm layer hight


    19 downloads

       (1 review)

    0 comments

    Updated

  11. Endo the 3D printed Action Figure

    Endo the 3D printed Action Figure

    2,165 downloads

       (2 reviews)

    1 comment

    Updated

  12. Ford Fiesta

    We just bought a new Fiesta and I thought it would be fun to print a model.
    So here it is :-)
    Sliced with Simplify3D.
    I like the result, the model actually shines like gold :-)

    2,437 downloads

       (1 review)

    0 comments

    Updated

  13. The Ultibot/olsoon block Contest

    5.65 mm and 5.95 mm for me !
    Printed with an Ultimaker 2 / Olsson block @ 0.4 (Jet Nozzle)

    1,744 downloads

       (0 reviews)

    0 comments

    Updated

  14. Black Widow from Mass Effect

    Since I sold my M98-Widow, I decided to make a new one.

    But I wanted it slightly different... I remembered that in the game, it has a variant. Much more powerfull.
    The Black Widow.
    The model is the same. The only difference is the paintjob.
    I had lots of fun revisiting this one. It's one hell of a print (about 100hrs with a 0.8nozzle) and roughly 1.3kg of material but I find it sooooo badass that it was totally worth it ^^
    For more details on the entire process, be sure to check the linked Youtube video about the M98-Widow.
    Also, if you want to follow my next projects (Video games and movie props mostly):
    Twitter: @Starjeff3d
    Facebook: https://www.facebook.com/StarJeff3d



    2,754 downloads

       (0 reviews)

    0 comments

    Updated

  15. PLActron vase delta - #04

    printed on Ultimaker2-A39sliced with Cura 15.02.1 (UltiGCode)optimized with Curator 0.1.0.1model: https://www.youmagine.com/designs/plactron-vase-delta------------------------------------------------------------988 Layers0,2mm Layer Height0,8mm Wall Thickness0,8mm Bottom/Top Thickness0,2mm Initial Layer Thickness----------------------------------------0% Infill0 Retractions0 Layers with Support----------------------------------------30mm/s Print Speed80mm/s Travel Speed20mm/s Bottom Layer Speed30mm/s Infill Speed----------------------------------------Filament: Innofil3D PLA color (2.85mm)----------------------------------------235°C Temperature66°C Bed Temperature7,00 Meters printed  

    2,518 downloads

       (0 reviews)

    0 comments

    Updated

  16. Make: Rook

    Have seen this print on various occasions (usually enlarged) and wanted a go at the original size (23.5mm tall). The coin below is a 5 eurocent coin (21mm diameter).
    Even though the extreme closeups suggest otherwise, the print looks very satisfying

    1,919 downloads

       (0 reviews)

    0 comments

    Updated

  17. Boitier pour Raspberry Pi

    Boitier pour Raspberry Pi

    2,239 downloads

       (0 reviews)

    0 comments

    Updated

  18. My first prints

    My first prints

    1,580 downloads

       (0 reviews)

    0 comments

    Updated

  19. Delta Parts

    Delta Parts

    1,434 downloads

       (0 reviews)

    0 comments

    Updated

  20. Ultimaker robot

    0.5 Scale, 0.375 Scale and 0.25 Scale
    Not happy with the results so far but a decent first attempt at a "micro" print.
    Printed with Colorfabb XT-CF20
    Printer Modifications:
    Gear Extruder-https://ultimaker.com/en/community/view/17634-gear-extruder-anyone-interested?page=1
    Olsson Block Fan Mount-https://www.youmagine.com/designs/um2-olsson-block-fan-mount

    1,432 downloads

       (0 reviews)

    0 comments

    Updated

  21. brotherbear-of-steel

    I helped to print in 3D a wonderful job! +Dmitri Dubyaga my friend and Colleges. Meet brotherbear-of-steel, #fallout #falloutstyle he created the 3D model within 14 days. I printed it for 36 hours on 3D printer #ultimaker2 and pla #rec. 5 days later, Dmitry painted by hand with acrylic paints

    1,620 downloads

       (0 reviews)

    0 comments

    Updated

  22. Subaru Aftermarket Headlight Bulb Cap

    When installing aftermarket HID or LED headlight bulbs in a newer model Subaru, the headlight housing cap will likely not fit without modification. This part will fit into a 50 mm (2") hole and allow the bulb and wiring to fit while maintaining the OEM waterproof cap.

    1,937 downloads

       (0 reviews)

    0 comments

    Updated

  23. New print

    New print

    17 downloads

       (0 reviews)

    0 comments

    Updated

  24. STEMFIE Desktop Christmas Tree

    This STEMFIE project builds a small Christmas tree you can assemble in under 15 minutes and decorate using coloured STEMFIE fasteners.
     
    Assembly instructions: https://stemfie.org/sps-000002

    0 downloads

       (0 reviews)

    0 comments

    Submitted

×
×
  • Create New...