3D Prints
1,105 files
-
Prosthetic Arm for the people who are in need
By vmuddu
This Arm printed on behalf of e-Nable Australia.
746 downloads
(0 reviews)0 comments
Updated
-
(0 reviews)0 comments
Updated
-
Pikachu NightLight Prototype
By kmanstudios
I started with a cheap LED nightlight from the local 99¢ store and took off the original plastic decorative cover. Then made test prints to get the fit right and work out the bugs. This was printed in ColorFabb Dutch Orange Transparent. It is what I had. Waiting on some Faberdashery LemonDrop Yellow Transparent for the final.
Making these for the grandkids and then branching out for the big kids They like this sort of thing too, just different subject matters.
Originally from the "Pikachu Cheeky" 3D model in the Lil_Pikachu.zip file I downloaded. Greatly modified. But there are a gazillion versions of the same pose everywhere.
456 downloads
(0 reviews)0 comments
Updated
-
(0 reviews)0 comments
Submitted
-
Pinhead
By cloakfiend
Classic Hellraiser character I always wanted make, not finished and not perfect, I think my coupler finally needs replacing!
Over a hundred pins BTW, well annoying!!! and i didn't even do the back!!!
628 downloads
(0 reviews)0 comments
Updated
-
Traffic Cone
By JohnK
Just received our UM3 and decided to print something small and simple to test dual extrusion. Printed in Colorfabb PLA/PHA Dutch orange and white
Results are great!
1,332 downloads
(0 reviews)0 comments
Updated
-
Geert Keteleer's Snake Clip
By nzo
Printed on 'salted' glass bed. Salted snakes! Yum...
625 downloads
(0 reviews)0 comments
Updated
-
Classic Tron Recognizer
By tinkergnome
A rather simple old model, but I like it.
Printed on Ultimaker Mark2 with black PLA and ColorFabb Glowfill
Sigh - 1982... I'm sure it was a great year... 8)
512 downloads
(0 reviews)0 comments
Updated
-
Anyone know what are these small corner blobs and how to get rid of them?
By ftoons
This is a standard 20 x 20 mm calibration cube (from thingiverse) but scaled height to 60 mm in Cura 2.6.2.
Vase mode. printed to test different temperatures. The problem occurs even with stable temperature as the shortest cube shows (that one was printed at 215 C)
Retraction was ticked on at 25 mm/s. But I don't think it retracts in vase mode anyways, right?
The problem gets better with more height as the cubes show (bases on right, tops on left of image).
546 downloads
(0 reviews)0 comments
Updated
-
(0 reviews)0 comments
Updated
-
-
Mini Spool Adapter for UM3 Series
By kmanstudios
Basically two adapters for the UM3 series to hold mini-spools such as on the Taulman 1lb. Spools. The small version has no threading part and the full version has the threading part. I had to make this because that stuff is sproingy as hell and rewinding it onto a full sized spool was not easy to do or keep straight. Also allows for the netting to remain in place as recommended by Taulman.
Designed for flexibility.
There are two versions so that people can choose which they want to use and print. All pivot points aligned to create an interior double wall that is stronger than a 90° angle for the holder to the spool rod. This is illustrated in one of the pics. Can also choose individual infills as desired.
I prefer the full holder as it aligns the filament to feed much better. Included the adapter and just the spool for flexibility for the users.
This print still needs a bit more polishing to make it look good, but, hey, wanted to get it up. I need to clean it a bit. Printed in Polycarbonate for strength. Makes clean up a bit difficult (3 x-acto blades so far) but who wants a spool to fail during a print?
545 downloads
(0 reviews)0 comments
Updated
-
(0 reviews)0 comments
Updated
-
Ultimaker Airplane Model (print + sand + paint + coat)
By vincentbaas
This was my biggest model so far and I'm quite satisfied with the result after lots of sanding, priming, and painting. As the model is made for the UM2 Extened, I had to split the wings and fuselage using Mesmixer. I printed the parts with 0.15mm layers in various PLA types (ran out of UM PLA after the body )
One of the body parts came out weird, and next time I would look into making alignment pins of some sort. Gluing with CA superglue worked fine, only aligning some parts was tricky. I underestimated the finesse that goes into neatly painting a model of this size, but in the end I got the paint to both fill some tricky parts as well as nicely cover the entire model. The model itself is great, only assembly took some filing, especially for the engines and wing pin.
Filament:
Body: Ultimaker PLA Silver Metallic
Wings + engines: ColorFabb PLA/PHA White
Stand + turbine: ColorFabb PLA/PHA Black
Materials
'Regular' CA superglue
Tamya Grey Model primer
White acryllic paint
Clear acryllic coat
Sanding paper 120/180/200/400 grit
900 downloads
(0 reviews)0 comments
Updated
-
(0 reviews)0 comments
Submitted
-
Beyond UMO - UM2 Slideblocks
By neotko
Fast-Swap Slideblocks to move from UMO to UM2 and back. Supports GT2 and MXL and it's greatly based on the Step files from Ultimaker 2 github and the fantastic Twisterblocks by Chopmeister.
Main goal it's to gain some extra cm of print area on UMO+ using a full UM2 hotend.
2,142 downloads
(0 reviews)0 comments
Updated
-
Bugs Bunny Plaque
By kmanstudios
Pretty much used Cura 2.5 default settings. Matterhackers Red Transparent Red PLA. Did use PVA support and printed vertically to give better print results (no circular steps on subtle curves). Painted with a combo of Metallic Paint (Main Frame and internal Frame accent) as well as Fingernail polish with Gold Testors Model paint for accents and a really, really fine brush. Why? Because it can be sparkly and give subtle color transitions as your viewing angle changes. I like sparklies and twinklies.
Printed at default 0.2 MM on UM3_X
Two walls
Used "Hollow Out Object" in the experimental tab which will hollow out the object as well as create a support structure for the internal overhangs.
Cribbed from Bugs Bunny image Bugs Alone) found in search engine (Style Guide art). Used a Looney Toons Font (Free). Designed the Frame and such around cribbed style guide art. Painted base parts but left main red area alone to allow light to transmit through.
Made for a very nice young lady who just earned her Doctorate.
560 downloads
(0 reviews)0 comments
Updated
-
CL4P-Tp Steward Robots from the game Borderlands
By BrianY1
Here are some custom models I made for a miniature robot from a popular video game. I thought it would be a cool thing to share with students when introducing 3D printing technology and what all they could possibly do with it.
485 downloads
(0 reviews)0 comments
Updated
-
Bully Trophy from Bullseye
By cloakfiend
Just a mock up of a Bullseye trophy minus the dart, only really found two pictures on the internet of it so but am fairly happy with it as it was just for fun. Fixing the messed up print on the other hand was not fun. I am very stubborn though, but next time I'm just gonna print the damn thing again!
There was a hole in the mouth so when i acetoned it, it split because it got inside! the legs did not split. I also forgot to add the button in the splitter!! Oh well ill add them in the next one.
Loads of pics to see the madness I went through just to finish it!
788 downloads
-
Skull Tea Light Holder
By fbrc8-erin
I was putting together a get well package for someone who had requested a skull print--this one seemed perfect for them. Printed in Faberdashery Mercury Red.
581 downloads
(0 reviews)0 comments
Updated
-
Triangle spinner
By Andrey1
This is my second design of the fidget spinner. Double coloured. Central bearing is 22X8X7, side bearings are 19X7X6.
554 downloads
(0 reviews)0 comments
Submitted
-
(0 reviews)0 comments
Submitted
-
Fire-Creature/Water-Creature
By fbrc8-erin
I always like to try and find really beautiful models on Thingiverse that don't have any Makes to them. This one fit the bill! FP-Creator posted the model over a year ago, but it didn't have any makes when I found it last week, so I resolved to fix that.
Edit: I printed 2, one in space marine and 1 in Mercury red. And illuminarti designed a custom stand for them which I printed in gold PLA.
The print took 21 hours with .1 layer height, printed at 100% of the file size.
A video of the print from every angle is on Facebook here:
621 downloads
(0 reviews)0 comments
Updated
-
Minion
By Andrey1
This model was designed as a toy for children with inner compartment. May be used as a case for some electronic toy (with further customisation).
668 downloads
(0 reviews)0 comments
Updated
-
Shuriken Spinner
By Andrey1
All parts are printed as usual without support, but central cup. It is printed thumb-touching surface up.
I used standard 608 bearing.
612 downloads
(0 reviews)0 comments
Submitted
