3D Prints
1,105 files
-
Example; Community Contest, Part 4 | Going Dutch
By SandervG
This is an example on how to upload your entry.
This is not an entry to the contest.
This lion is convincingly Dutch.
Do you want to participate in the contest and win a free special edition Olsson Block?
You can participate here!
1,348 downloads
0 comments
Updated
-
0 comments
Updated
-
Community Contest, part 3 | The bearing
Gear Bearing scaled to 0.249 with a diameter of 12.873mm and a height of 3.73mm.
1,477 downloads
0 comments
Updated
-
Printed a very nice looking Scifi lamp
By domustyle
I printed this amazing scifi Lamp from Gothampixel/Thingieverse for my living room.
1,592 downloads
0 comments
Updated
-
Community Contest, part 3 | The bearing made by
By grpiotr91
Same as last time we have printed the robot with modified cooling system (made specially for this contest) using these little turbines to cool down the print: http://www.tme.eu/...on/gb1205phv1-8aygn/
BUT! We also used a little trick while printing the bearing! We will disclose it after the competition
External diameter:
Biggest - 15mm
Medium - 10mm
Small - 8mm
1,372 downloads
0 comments
Updated
-
Community Contest, part 2 | The Ape
Professor Ultibot and the Golden Gorilla
It had seemed simple to Professor Ultibot, while sitting in his office at Ultimaker University. The plan snapping into place moments after he had finished decoding the tattered journal from the unfortunate Bauermaker expedition. He would fly into the largest unmapped jungle in the world, find the Lost City, navigate the traps in the labyrinth, unlock the gates to the Great Temple and retrieve the Golden Gorilla. He hadn't counted on how he was going to get the statue out and he hadn't counted on the snakes... He definitely hadn't counted on the snakes.
This entry into the Community Contest, part 2 starts with a simple print of the LowPolyMonsta in 1.75 mm ColorFabb Leaf Green. The 1.75mm filament is printed on a stock Ultimaker 2 with no modifications. The LowPolyMonsta was then post processed to create the golden statue effect. The statue base is a broken print of the Apollo lunar lander descent module. The snakes are small pieces of 1.75mm filament twisted into shape. Professor Ultibot is reused from last week's entry. The whip is made from a small piece of NinjaFlex that was curled and then placed in boiling hot water & allowed to cool to fix the shape. The end of the whip was cut at an angle at the tip to give the impression of a bullwhip tip. There are a few little extra details in the scene for those that pay careful attention. A miniature silver Lilliputian bot recycled from the part 1 contest is at the base of the altar and might serve as a consolation prize for Professor Ultibot if he can't figure out how to move the Golden Gorilla. Barely glimpsed in the background is a Flexy Rex by designer Zheng3. Whether the dinosaur is a statue or something else remains to be seen.
While planning the entry for this contest, I had originally thought about recreating the Empire State Building from King Kong off the side of the Ultimaker. Studying the static pose of the model I thought it looked more like a primitive statue. I imagined the interior of the Ultimaker 2 as the inside of a temple. The composition of the scene is a mashup of an Indiana Jones movie and a classic Dungeons and Dragons cover.
1,340 downloads
0 comments
Updated
-
is this ok for the the third contest ?
By halex
10.34x10.34x3mm 100microns 20mm/s 8minutes
1,227 downloads
0 comments
Submitted
-
0 comments
Updated
-
Community Contest, part 3 | The bearing
By 3dcase
My last years entry, lets try again
19.5mm in diameter and working...
1,424 downloads
0 comments
Updated
-
Community Contest, part 3 | The bearing
By SandervG
This is an example on how to upload your entry.
This is not an entry to the contest.
The bearing is 31mm in width.
Do you want to participate in the contest and win a free special edition Olsson Block?
Read more about it here!
1,513 downloads
0 comments
Updated
-
0 comments
Updated
-
Gorilla in Banana Kiddiepool
By craftee
Entry for contest.
Gorilla printed with Colorfabb bamboo fill
Bananas printed with Colorfabb XT Yellow
Kittypool printed with Colorfabb XT Blue
Photograph shot with Canon 60D
swimming pool in the background.
Gorilla designed by Bauermaker
(https://www.youmagine.com/designs/lowpolymonsta)
Bananas and Kiddiepool designed by me
1,288 downloads
0 comments
Updated
-
EXAMPLE: Community Contest, part 2 | The Ape.
By SandervG
This is an example on how to upload your entry.
This is not an entry to the contest.
Do you want to participate in the contest and win a free special edition Olsson Block?
Read more about it here!
1,253 downloads
0 comments
Updated
-
Community Contest 1: Ultibot's Travels
Ultibot had sailed the Seven Seas in search of the rumored race of miniature bots. He awoke to discover that the little Lilliputian bots had found him first.
"Look at the size of him!", the Lilliputians exclaimed. "Have you ever seen such a thing in your whole life?" Even the oldest and wisest among them including the smallest and most ancient of the Lilliputian bots had to admit that they had never seen such a thing in their whole lives.
1,458 downloads
0 comments
Updated
-
Labern Community Contest, part 1 | The Ultibot
By Labern
https://ultimaker.com/en/community/view/18109-community-contest-part-1-the-ultibot?page=1&sort=#reply-124603
Range of robots as i dont know what they mean by good quality
1,692 downloads
0 comments
Updated
-
0 comments
Updated
-
Dengue proof, self watering plant pot
By wishbone
We can't have water traps on our plants in Singapore due to the mosquitoes, so we need to water our plants everyday.
Whenever I travel and can't water my plants they pretty much always have a near death experience as they need watering everyday.
I made this so it has a water reservoir that is sealed off from the outside so the mosquitos can't get in. The inside of the plant pot wicks into the water reservoir.
1,505 downloads
0 comments
Updated
-
Ultirobot small for Community Contest, part 1 - Second Try | The Ultibot
By neotko
Printed again but this time simulating a 0.30 nozzle with the 0.4 nozzle on S3D.
Also lowered the speed from 30mm/s to 20mm/s
Printed 2 rows, one with supports and the other without.
1,684 downloads
0 comments
Updated
-
Olsson block contest - Ultimaker robot
By grpiotr91
We have printed the robot with modified cooling system (made specially for this contest) using these little turbines to cool down the print: http://www.tme.eu/pl/details/gb1205phv1-8ay/wentylatory-dc-12v/sunon/gb1205phv1-8aygn/
The biggest robot is 10mm tall
Medium is 6mm tall
Smallest, barly can see it, 3mm tall
1,482 downloads
0 comments
Updated
-
0 comments
Updated
-
Ultirobot small for Community Contest, part 1 | The Ultibot
By neotko
0.4 E3D nozzle. Ultimaker Original Plus
1,477 downloads
0 comments
Submitted
-
Ultimaker robot
By mendells
0.5 Scale, 0.375 Scale and 0.25 Scale
Not happy with the results so far but a decent first attempt at a "micro" print.
Printed with Colorfabb XT-CF20
Printer Modifications:
Gear Extruder-https://ultimaker.com/en/community/view/17634-gear-extruder-anyone-interested?page=1
Olsson Block Fan Mount-https://www.youmagine.com/designs/um2-olsson-block-fan-mount
1,440 downloads
0 comments
Updated
-
EXAMPLE: Community Contest part 1 | the Ultibot
By SandervG
This is an example on how to upload your entry.
This is not an entry to the contest.
1,233 downloads
0 comments
Submitted
-
Brave friend
By tinkergnome
I found this injured penguin one morning... don't know where he comes from...
but i cockered him a bit...
...and now he is a rigorous guard of the bureau.
2,167 downloads
0 comments
Updated
-
0 comments
Updated