3D Prints
1,105 files
-
Jeex board with stones
By jeex
We're developing a new board game. With 123d Design we made the prototype. We want to use this for producting a very small first edition of five for testing the game. We also use this as example for production companies.
By making the .stl-files and printing these with the UM2 we learned a lot about what's possible in production and we could actually see and feel the product.
The board has two identical halfs, printed in cheap gray PLA that came with the UM2 (second hand). Both parts are kept together with two printed hinges. There's space for screws through the hinges and magnets on the corners. Inside the box the owner can store the 14 stones that come with the board.
The stones are printed with Colorfabb colors. Very beautiful results. The exist of a thick and thin part and a core. So we could print three different parts in three colors and smply push them together with a tiny drop of glue.
Next steps: having the board produced in all kinds of materials, like bamboo, wood, urea, steatite, ceramics, glass and even aluminium.
2,153 downloads
(0 reviews)0 comments
Updated
-
Power Transformer
By thorvinus
A model of a power transformer, made as a retirement gift for some higherup in my company
The parts (about 20) are a mix of different colored PLA and Woodfill and some non printed stuff glued together, only took my about a month (in my free time)
1,674 downloads
(0 reviews)0 comments
Updated
-
Printed with 0,06mm layer, 50mm/seg temp. 210/60ºC
By celso-santos
Printed with 0,06mm layer, 50mm/seg temp. 210/60ºC
1,917 downloads
(0 reviews)0 comments
Updated
-
(0 reviews)0 comments
Updated
-
Make: Rook
By Blizz
Have seen this print on various occasions (usually enlarged) and wanted a go at the original size (23.5mm tall). The coin below is a 5 eurocent coin (21mm diameter).
Even though the extreme closeups suggest otherwise, the print looks very satisfying
1,916 downloads
(0 reviews)0 comments
Updated
-
Make: Rook
By Blizz
Have seen this print on various occasions (usually enlarged) and wanted a go at the original size (23.5mm tall). The coin below is a 5 eurocent coin (21mm diameter).
Even though the extreme closeups suggest otherwise, the print looks very satisfying
1,921 downloads
(0 reviews)0 comments
Updated
-
(0 reviews)0 comments
Updated
-
UltiBot Move
By Labern
My first little project for my new UM2go, an Ultimaker robot with movable arms and legs
All printed in 1 piece
2,258 downloads
(0 reviews)0 comments
Updated
-
APC Flare Hatches - PLA + ABS
By NBroenner
Had to adapt the infill to 25% and angle of support to 10 degrees due to angle of the items.
1,509 downloads
(0 reviews)0 comments
Updated
-
Naze32 flight controller frame mount case
A universal case for the Naze32 flight controller for multirotors
2,079 downloads
(0 reviews)0 comments
Updated
-
UM Transparent Dark Green PLA face test
By cloakfiend
Just wandered what this filament looked like, ive had it lying around for a while and never really used it. Will give this a wash in acetone and see what that does to he lines.
1,471 downloads
(0 reviews)0 comments
Updated
-
(0 reviews)0 comments
Updated
-
Refil.nl > Recycled PET
By ultiarjan
The recycled PET prints very easy, I was positively surprised ... I got a free spool (thanks for that) as they used one of my 3dmodels in their video (look at www.refil.nl)
2,151 downloads
(0 reviews)0 comments
Updated
-
Ultimaker Original heated bed cable chain by Drayson
By tommyph1208
Printed a cable chain for my heatbed cables
2,451 downloads
(0 reviews)0 comments
Updated
-
(0 reviews)0 comments
Updated
-
(0 reviews)0 comments
Updated
-
Iron Budda with rust patina.
By cloakfiend
Bit too much rust patina on this one and it even started to shine, lol so applied a green patina, but as it was an iron/varnish mix and not copper/varnish it just went rusty not green/blue.Still looks cool, and just adding more are more patina makes it cooler by the day. Next time i will selectively add the patina rather than just dousing the entire thing in it.
1,556 downloads
(0 reviews)0 comments
Updated
-
My first 123D work mate in a copper coating, second attempt.
By cloakfiend
No patina this time round, just a black wash and very lightly sanded down on the original varnish and copper mix i made. no fancy paints here. Next text will be with fancy paints, but to tell you the truth i dont think they will look much better. Well happy with this effect. Even though it looks more bronze than copper.
I also went kinda heavy with the coating as i did no post processing what so ever, just undercoat spray for the paint to stick on, no acetone or sanding at all. While printing it suffered from jammed filament on the roll syndrome so skipped a few layers printing nothing, never again since. I don't print off the roll anymore ever.
1,698 downloads
(0 reviews)0 comments
Updated
-
First attempt at gold leaf coating
By cloakfiend
First time ever with gold leaf, and found it a bit hard to get in the tiny gaps and holes that seem to crop up lot. Maybe not enough glue. Would be good for statues or other smooth objects.
1,514 downloads
(0 reviews)0 comments
Updated
-
Copper Patina first test run...
By cloakfiend
Just polished up the old model with wire wool to reveal the copper surface then gave it a spray with tiffanys patina green, and left it for about an hour and got this, should look even more intense after 6hrs apparently.
went a bit too hard on the old sanding but its hard when you want the shine and only have a few micro meters of paint to play with and its my first attempt so i hope i get better. unless you make a cast or use a tougher coating (which im working on..) its gonna be hard to sand/buff/polish coatings of DIY metal paint. The exotic paints use hardener and catalysts so im pretty sure they'll work better/easier?
Still fun, and i love distressed looks so im happy that i don't need to make casts for everything. which would take up even more of my time.
1,797 downloads
(0 reviews)0 comments
Updated
-
(0 reviews)0 comments
Updated
-
should be a test print^^ test succsessful!
By domustyle
i just wanted to test my new settings and it seems like that they are nearly perfect. no need for some finishing on the object!
1,594 downloads
(0 reviews)0 comments
Updated
-
(0 reviews)0 comments
Updated
-
Copper Powder Prototypes
By cloakfiend
My first face done with catch123, i thought id try out some coating experiments. The clay model had no post work at all and the darker one was acetone smoothed before priming. Both blue UM PLA printed at .08mm clay look and .1mm copper look.
1,455 downloads
(0 reviews)0 comments
Updated
-
Iron budda
By cloakfiend
coated with an iron and varnish mix. a fail but still interesting. will put better picture when i get home.
1,769 downloads
(0 reviews)0 comments
Updated
