Jump to content
Ultimaker Community of 3D Printing Experts

3D Prints

1,066 files

  1. New print

    New print

    2 downloads

       (0 reviews)

    0 comments

    Updated

  2. New print

    New print

    0 downloads

       (0 reviews)

    0 comments

    Submitted

  3. PIKACHU WITH DUAL-BALANCE

    PIKACHU WITH DUAL-BALANCE

    435 downloads

       (0 reviews)

    0 comments

    Updated

  4. Call of duty Zombies Ray Gun

    not the best paint job; still a WIP.

    1,343 downloads

       (0 reviews)

    0 comments

    Updated

  5. Somua WWII French Tank

    Test print for a new setup for our UM3's.

    983 downloads

       (0 reviews)

    0 comments

    Updated

  6. Laser turret for X-Wing miniature game.

    Finished model is 2" tall, printed at 60 microns with PLA on my Ultimaker 2 Go.

    2,177 downloads

       (0 reviews)

    0 comments

    Updated

  7. starwars ep7 stormtrooper helmet

    Hi
    Doing a lot of work in solidworks lately, and messing about with the surfacing tools, i modelled my own starwars ep7 stormtrooper helmet (full size, wearable) to seen if it could handle this type of shape. Worked out ok, gave it a quick paint job with primer and a black and red marker to weather and make it look like finns. first print 1/4 size.

    1,020 downloads

       (0 reviews)

    0 comments

    Updated

  8. T72

    T72

    913 downloads

       (0 reviews)

    0 comments

    Updated

  9. Babylong 5 PPG, Old Test Print

    Did that one a few years ago on a UM2. Testing the efficiency and quality of 3D printing viable props for movies.
    Honestly... it was a great experiment. We went on to 3D printing numerous different props for movies, commercials, etc.
    Linked to a different, more recent PPG 3D file.

    931 downloads

       (0 reviews)

    0 comments

    Updated

  10. First Order Storm Trooper Skull

    3D modeling in maya.
    3D printing.
    Molding.
    Resin casting.
    Painting.
    by me.
    https://www.artstation.com/artwork/YZP5q

    721 downloads

       (0 reviews)

    0 comments

    Updated

  11. Panther G-1 HO scale 1:87

    Panther G-1 HO scale 1:87

    666 downloads

       (0 reviews)

    0 comments

    Updated

  12. Konstantin

    my new toy heavy revolver.

    2,265 downloads

       (0 reviews)

    0 comments

    Updated

  13. Fallout 4 Stimpack

    A Stimpack from the game Fallout 4, modeled in Blender and printed on an Ultimaker 2, then sanded and painted.
    See the YouMagine link ("Get 3D model") for full finishing details.
    Note: While I was in the finishing process, my backordered extrusion upgrade kit arrived. So I reprinted the gauge needle with the 0.25mm nozzle, at a layer height of 0.04mm. (All the rest was printed with the stock UM2 0.4mm nozzle, at a layer height of 0.12mm.)

    2,500 downloads

       (0 reviews)

    0 comments

    Updated

  14. Sentinel 40K

    My finished sentinel. Legs are split in parts so no support is needed. the "head" was taken from a 3d model posted online and is close to the original. next step is to build a gun

    1,911 downloads

       (0 reviews)

    0 comments

    Updated

  15. Star Wars Thermal Detonator

    Printed this thermal detonator for my son, came out pretty nice I would say (3 parts to be assembled)!
    Material = Ultimaker PLA Silver Metallic
    Design made by AprilStorm

    1,147 downloads

       (0 reviews)

    0 comments

    Updated

  16. 3D Printed and Painted Terran Space Marine

    This model was tested in Cura 15.06. To avoid printing problems, we recommend the following settings:
    Quality
    Layer height: 0.1mm*
    Initial layer thickness: 0.3mm
    Bottom/top pattern: lines
    Skin perimeter line count: 0
    Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers).
    *Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double.
    Speed setups:
    Infill speed: 30mm/s
    Outer shell speed : 30mm/s
    Inner shell speed: 20mm/s
    Top/bottom speed: 20mm/s
    Support speed: 50mm/s
    Travel speed: 150mm/s
    Skirt speed: 30mm/s
    Amount of slower layers: 4
    Infill:
    Infill pattern: Grid
    Line distance: 1.5mm
    Infill overlap: 20%
    Infill layers: 0
    Support:
    Enable support: Check
    Placement: Everywhere
    Overhang angle: 30°
    X/Y distance: 0.7mm
    Top distance: 0.2mm
    Bottom distance: 0.2mm
    Stair step height: 0.5mm
    Join distance: 0.7mm
    Area smoothing: 0.6mm
    Use towers: check
    Pattern: Lines
    Line distance: 1.5mm
    Platform adhesion:
    Type: Brim
    Brim line count: 10 (up to 20, depending on the model’s height)
    Other 3D printing recommendations:
    Outer Shell Speed - 20mm/s and Support Speed - 40mm/s settings apply to avoid model deformation. Apply other settings by default.
    Disclaimer: This model will look outstanding if printed on SLA/SLS 3D printer. The accuracy of the model printed on FFF printer can vary from the result shown in the pictures.

    3,132 downloads

       (0 reviews)

    0 comments

    Updated

  17. USS Enterprise for small print

    This is the original Enterprise. Well, one of the three used in production. Based off Alan Sinclair's Blueprints, which are regarded as the most accurate available. http://www.cygnus-x1.net/links/lcars/sinclair-enterprise.php This has two sets of Enterprises: One is a lower Rez version and the other high reZ version. I have a great fondness for this ship since as a child, it was the one that broke the mode of flying saucers and tube rockets. A truly revolutionary design that has spawned many great versions through the decades.  The stand is included here to be combined as one color or made as a two color print. Sized for this model. The stand can hold a printed version of the ship at 110% as well.
    Development can be watched here:
    https://ultimaker.com/en/community/42478-learning-from-the-noobverse-for-all-the-noobs-having-fun-with-the-um3?page=1&sort=#reply-178479

    829 downloads

       (0 reviews)

    0 comments

    Updated

  18. Star Wars Episode VII Resistance X-Wing

    Since I'm been waiting for Star Wars Force Awakens to come out soon, I decided to model the Resistance X-Wing on 3ds Max and I used the trailer for reference. I have tested and printed using Ultimaker 2, and It was very interesting of trying to get the right shape of the new X-Wing ship.

    1,761 downloads

       (0 reviews)

    0 comments

    Updated

  19. Redicubricks lightsaber

    Made this as a fathers day present.

    3,042 downloads

       (0 reviews)

    0 comments

    Updated

  20. Tesla Supercharger (phone charger)

    Tesla Supercharger (phone charger)

    2,546 downloads

       (0 reviews)

    0 comments

    Updated

  21. Gyro the Dodo by Virtox

    The original dodecahedral kinetic sculpture by Stijn van der Linden a.k.a. Virtox.
    Made of five nested dodecahedra, each one is limited to rotate around its own axis.
    It was printed with dual extrusion on an Ultimaker 3 with water-soluble PVA support material.

    9,687 downloads

       (5 reviews)

    0 comments

    Updated

  22. Jesse McCree 3D model Printing Recommendations

    Quality
    Layer height: 0.1mm*
    Initial layer thickness: 0.3mm
    Bottom/top pattern: lines
    Skin perimeter line count: 0
    Horizontal expansion: 0.04mm (when entering 0.04mm index, the 3D printer perceives the model as monolith, i.e. as having no hidden layers).
    *Layer Height 0.1mm is recommended for a better quality for the printed model. However, the printing time will double.
    Speed setups:
    Infill speed: 50mm/s
    Outer shell speed : 30mm/s
    Inner shell speed: 20mm/s
    Top/bottom speed: 20mm/s
    Support speed: 50mm/s
    Travel speed: 150mm/s
    Skirt speed: 30mm/s
    Amount of slower layers: 4
    Infill:
    Infill pattern: Grid
    Line distance: 3mm
    Infill overlap: 20%
    Infill layers: 0
    Support:
    Enable support: Check
    Placement: Everywhere
    Overhang angle: 30°
    X/Y distance: 0.7mm
    Top distance: 0.2mm
    Bottom distance: 0.2mm
    Stair step height: 0.5mm
    Join distance: 0.7mm
    Area smoothing: 0.6mm
    Use towers: check
    Pattern: Grid
    Line distance: 1.5mm
    Platform adhesion:
    Type: Brim
    Brim line count: 10 (up to 20, depending on the model’s height)
    Other 3D printing recommendations:
    Outer Shell Speed - 20mm/s and Support Speed - 40mm/s settings apply to avoid model deformation. Apply other settings by default.

    1,715 downloads

       (0 reviews)

    0 comments

    Updated

  23. Luke's e-NABLE Hand

    Learn more about Luke and e-NABLE in our Ultimaker story here.

    3,664 downloads

       (0 reviews)

    0 comments

    Updated

  24. recent prints

    recent prints

    2,084 downloads

       (0 reviews)

    0 comments

    Updated

  25. 1:100 Print of a Centurion Tank from a Model by M_Bergman

    1:100 Print of a Centurion Tank from a Model by M_Bergman

    1,905 downloads

       (0 reviews)

    0 comments

    Updated

×
×
  • Create New...