Jump to content
Ultimaker Community of 3D Printing Experts

3 Screenshots

About This File

Description

The standard knob of Ultimaker did not really appeal to me because it was relatively difficult, e.g. to set the temperatures from 0 to 240 ° C.

With this rotary knob you can enter such values quickly.

Update 05.02.2017:

Increase the outside diameter of the knob by 1.50 mm. Acceleration of the printing process.

Materials and methods

Rotary Knob:

Material: PLA, 2,85 mm (Innofil)

Colour PLA: white

Nozzle: 0,25 mm

Layer thickness: 0,15 mm

Temperature nozzle: 240°C

Temperature buildplate: 60°C

3D-Printer: Ultimaker 2+

Colouring: white, special-acrylic-resin-spray (TS-26 from Tamiya)

Cross:

Material: PLA, 2,85 mm (Innofil)

Colour PLA: silver metallic

Nozzle: 0,25 mm

Layer thickness: 0,06 mm

Temperature nozzle: 240°C

Temperature buildplate: 60°C

3D-Printer: Ultimaker 2+

Colouring: EMAIL COLOR silver (number 90 from Revell)

The cross was printed with a supporting structure, which also closed the recess in the cross-center, for placing on the rotary knob. This structure must be cut out with a pointed object.

Sorry for my bad English.


User Feedback

Recommended Comments

There are no comments to display.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...