Jump to content

All Activity

This stream auto-updates     

  1. Past hour
  2. Deine Einstellungen sind ja auch unterschiedlich.
  3. Er is eigenlijk maar een manier waarop je dit zou kunnen doen en dit is door een pauze in te lassen. Tijdens deze pauze kun je dan het filament wisselen. Dit heeft dan wel alleen effect wanneer de 3de kleur vanaf een bepaalde hoogte is. Je kunt een pauze invoeren door in cura te klikken op extensions -> post processing -> modify g code en door dan op de knop add script te klikken. Nu kun je een pauze toevoegen op een bepaalde hoogte.
  4. Hallo, ich habe mal eine Frage mit einem Problem, ich möchte ein Bauteil mit Stützstruktur aus PLA Drucken, mit dem 2ten Core, also Felge in dem fall AA0.8 PLA und support BB0.4 PLA jetzt ist es so wenn ich in Cura die Stützstruktur auf Extruder 2 umstelle druckt er mir eine andere Stützstruktur (wie wenn PVA zum beispiel geladen ist) wie wenn ich auf Extruder 1 umstelle. ich möchte gerne die Stützstruktur von Xxtruder 1 drucken aber mit dem 2extruder. versteht ihr was ich meine? 😂 Im Anhang natürlich Bilder. Steh ich gerade total auf dem Schlauch und überseh ich was? oder was muss ich machen das es so geht wie ich mir das vorstelle. MFG Stefan
  5. My bed is 220x 220x 240 the design is 150x150x20. The design is 1-3mm thick (it's a lithophane) with a base of 20. These are the exact dimensions with a difference in bases, that I always use. Nothing on the drawings have changed. My brim is 8 or 6 mm wide (can't remember). It even creates a shadow. This is all before slicing. Thanks for helping, I will try to play with the settings a little more.
  6. Today
  7. ...and your hand eye co-ord is defo looking looking on the mend to me! I got a lot of catching up to do! Im visiting HP Lovecraft material for my next prints! Keep up the massive inspiring good work! CF
  8. Damn you work your printers hard!!. Damn good work too!! well done, I'm trying to paint my new stuff, shouldhave a few things to show soon! Mine have it easy lately! I've been having major problems lately due to tons of rats nests (intersecting verts!), 720 of them!! Had to go back to zbrush to cut them all out! am printing now, but i know it will fail again, just didnt know why before! my s5 print head just parks itself on the right hand side middle area and jitters there. I kinda prefered the out of print area window as this new thing just stops the print but still says its printing!
  9. well if thats the case then shouldnt i be able to tinker around marlin to add E1 and E2 if necessary as part of the gcode that relays command to both extruders? I feel like this already exists in marlin and that i just need to understand how its laid out to get it to work. just so you know, I am making my own printer so a manufacturer help/tip is not an option.
  10. Hi, i have a problem trying to connect to the stream from the ultimaker S5. The printer is from the university study at and is connected to the local university network. I can access the stream over browser from a PC that is in the same room as the printer without any problems. But when i try to connect from other rooms it doesnt work, even though its the same network and the PC´ s should all be connect. When i try to connect via "" i get an error saying that connecting wasnt possible. Any ideas how to fix this?
  11. It migh be a good idea to upload the ultimaker firmware (from github), through the arduino IDE so you know you have a working FW version. It could also be a bug of a fault in the Gcode generated by the slicer. In general the stepper motors and drivers do not need cooling, they stil perform very wel at for example 90 gedrees, and are most of the times spect to still operate at 120 degrees in the case of the stepper motors, so air cooling is a bit overkill.
  12. No, I transfer all g codes to a flash drive (cable isnt long enough to connect to where I have the 3d printer stationed). Yes, I've tries several of the ultimaker defaults and even the custom FFF printer. I even uninstalled, and reinstalled using the ultimaker s5 as the printer.
  13. Well, at first this needs a printer that supports it ("duplication mode" or whatever it is called by the manufacturer). This applies to both, the hardware and the firmware of the printer. Given such a printer - it usually comes with a slicing software that can produce gcode for this mode. There's no "standard" for gcode (AFAIK) - it always depends on the implementation of the manufacturer. So - you have to take a look at the gcode file that is generated by the provided software - or you can simply ask the particular manufacturer.
  14. I also have a old prusa i3 (from 2014) which I recently upgraded with an UM2+ feeder and an e3d v6 hotend. I also use a z hop when traveling from one side of the print to another. The only reason I can think of that a z hop could reduce stringing is that the nozzle is not moving over already printed parts, these printed parts then could stick a little to the remaining plastic inside the nozzle end could sort of "pull the plasic out" and with a z hop this is not the case. This same effect is visible when printing a flas square with some holes for example, when the nozzle travles it oozes a little when moving, leaving spots of filament on the surface. When moving over an object, instead of a surface these become strings, resulting in stringing.
  15. Older versions can indeed be downloaded through github https://github.com/Ultimaker/Cura/tags download the right 'asset' at the bottom of the page Hopefully this helps and works
  16. If the text won't show on the bottom layer it might help to flip the model upside down (only if the other side is flat). Most of the times the top layer comes out much better than the bottom layer, because this layer is squeezed onto the build plate, as you can see in your first picture @SirUlrich, the left lide is squished more than the right side. When the print is flipped around the text sits on the top side and this will probably yield much better result, tekst wise. Because of this I always try to print all the details on the top side. Also make sure that the text you want to print does not have smaller lines than the 'line width' set in cura, otherwise the lines will dissapear because they become to small to print.
  17. Hoe kan ik een derde kleur printen met cura/UM3. 2 kleuren gaat prima, maar ik wil een object opbouwen in 3 kleuren? Graag uitleg hoe dat moet!
  18. That is weird because mine does show this setting: (ultimaker S5) Do you have the printer connected directly to Cura? (because of the 'active printer' bit) Have you tried changing the printer in cura(this may also change the active printer) just guessing 😉 When I activated this setting it was already at its lowest (0.7mm) so you can't change it to a lower value but this may be different on your machine.
  19. Hallo @Dim3nsioneer, über den Unterschied bin ich mir im Klaren. Der Reseller gibt ja ein Fenster an für die Lieferung, auf dieses war das Warten gestützt. Wie es aussieht scheint dieses Firmwarethema ja auch nicht so problematisch zu sein wie es sich anfangs las. Ich schau mal was sich bis nächste Woche noch so tut. 🙂
  20. @Starflashbully, natürlich hoffe ich, dass Du die Material Station bald bekommst. Aber bitte sei Dir bewusst, dass "available from" und "available on" zwei verschiedene Zeitpunkte sind. Frag doch einfach Deinen Reseller nach dem Lieferdatum; er müsste in der Lage sein, Dir mind. eine grobe Zeitangabe zu machen. Vielleicht bietet er Dir auch an, die Material Station schon zu liefern wenn Du ihm erklärst, dass Du Dir des Firmware-Themas bewusst bist.
  21. guys I have been looking for the gcode required to run 2 extruders simultaneously however not printing the same object. to clarify i am not looking for a slicer that would do it for me (though that would be nice) i am simply looking for a gcode that would enable me to independently control both stepper motors of both extruders. something that would resemble: E0 xx.xx, E1 xx.xx
  22. when I load the file in it shows up fine. Things to look at are: does the model fit on your build plate? even if it looks so, watch out for skirt/brim settings that extend the size. is the model too thin? play with the line width
  23. My problem is that I cannot change the "retraction minimum travel" setting. As of now, my printer operates with no retraction at all. The message next to the setting reads, "this setting has been hidden by the active machine and will not be visible". I've tried changing machine settings, uninstalling and reinstalling, I tried asking ultimaker directly.. can anyone help?!
  24. Da es sich um ein Notebook handelt, könnte noch eine der Zahlreichen vorinstallierten Anwendungen ein Problem verursachen, was ich jetzt zwar für unwahrscheinlich halte aber durch aus möglich wäre. Habe es soeben auf einem vergleichbaren Notebook getestet, welches eine saubere Windows Installation hat. Auch hier startet Cura wie gewohnt bei CPU Grafik unter Windows 10 nicht. Nach Aktivierung des Kompatibilitätsmodus startet Cura jedoch ohne Probleme. Bitte folgendes versuchen: Sicher stellen, dass der Kompatibilitätsmodus auf Windows 8 steht Cura als Administrator starten (rechts Klick als Administrator ausführen) Falls Cura immer noch nicht startet, bitte deinstallieren, danach folgende Ordner Löschen falls noch vorhanden C:\Users\BENUTZERNAME\AppData\Roaming\cura C:\Users\BENUTZERNAME\AppData\Local\cura C:\Program Files\Ultimaker Cura 4.3 Danach noch den gesamten Inhalt des Ordners Temp, nicht aber den Ordner selbst löschen. Nicht erschrecken, in diesen Ordner befinden sich unter Umständen mehrere hundert oder gar tausend Dateien die ausgelagert wurden. Ich persönlich lösche den Inhalt von diesem Ordner in solchen Fällen immer und habe bisher keine negativen Auswirkungen feststellen können. C:\Users\BENUTZERNAME\AppData\Local\Temp Anschließend neu starten und Cura erneut installieren, nach der Installation nochmals neu starten Kompatibilitätsmodus aktivieren und Cura starten Sollte Cura dann immer noch nicht starten habe ich leider keine weiteren Lösungsvorschläge. Ausweichen auf einen anderen slicer wäre dann die letzte Option, hier habe ich aber nur schlechte Erfahrungen in Verbindung mit Ultimakern sammeln können.
  25. Ok got it 😀 And you cannot choose 3 or 12 for example? I haven't calibrated for a long time but as far as I remember I was able to choose any number from the sheet.
  26. Hey @bruman! Since you seem to be printing okay with normal PLA, keep in mind that PLA+ has a slightly higher extrusion temp. I typically do 220°C versus the default 210°C for PLA. Hope you figure it out! I also hate when people don’t post a solution, so I always make sure to update my threads if I do figure it out!
  27. When I replace my nozzles it will blather about this configuration is not calibrated, so I run the calibration (see attached) I can move the calibration in .5 increments but .1 would be much closer to what I need.
  1. Load more activity
  • Create New...

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!