Jump to content
Ultimaker Community of 3D Printing Experts

Leaderboard

Popular Content

Showing content with the highest reputation since 12/04/2019 in 3D Print

  1. Version 1.0

    5,695 downloads

    This is a well known vase printed in Blue Lagoon from Faberdashery (very nice). It's printed with my Ultimaker 2 modified with the Olsson Block and a 1mm nozzle from www.3dSolex.com. Printed in Spiralize mode with a 1mm wall, and 0.5mm layers! It's very fast, around 1h25 to print at full height (200mm). Watch the video! I'll do a complete review soon on this nozzle
    3 points
  2. Version 1.0

    5,239 downloads

    promo toy for Russian company REC
    2 points
  3. Version 1.0

    2,192 downloads

    This GoPro Speargun mount is designed to fit the gun without getting caught in any of the bungy's when the gun fires. Its also meant to be streamlined to help stop it getting caught in seaweed and allow it to flow better though the water for longer breath holds.
    1 point
  4. Version 1.0.0

    14 downloads

    Made some consoles to hold UM3 power adaptor (might fit other models too) and extra power sockets on my printer cabinet to keep it tidy.
    1 point
  5. Version 1.0.0

    37 downloads

    After searching the net again and again, I did not found a nice Dom Tower variant to print. So I decided to create my own versions: Single piece version (20 cm tall) Duplo compatible (big colored one, 53 cm tall) Lego compatible (PLA brons fill & Glow in the dark) Christmas edition (PLA silver, optional having 3 electric candles inside) Unfortunately the electric candles are still somewhere in China so I'm still curious how this will look like.. Stl file could be found here: https://cults3d.com/en/3d-model/architecture/dom-tower-utrecht (Sin
    1 point
  6. Version 1.0

    9,687 downloads

    The original dodecahedral kinetic sculpture by Stijn van der Linden a.k.a. Virtox. Made of five nested dodecahedra, each one is limited to rotate around its own axis. It was printed with dual extrusion on an Ultimaker 3 with water-soluble PVA support material.
    1 point
  7. Version 1.0.0

    60 downloads

    1/40 Mosasaurus Nozzle : 0.4 Layer : 0.06
    1 point
  8. Version 1.0

    2,088 downloads

    I'm a huge Ghostbusters fan, and wen the board game came out, it included about 100 amazing figures.. but there were a few things lacking, so I decided to make them myself! First I did the slime splats you see pictured, modelled in zbrush. The big project though, was a dice tower based on the Ghostbusters firehouse. The game's figures are based off the comic book artwork, so I decided to do a toon version of the firehouse, based on the old saturday morning cartoon. Learning how a dice tower works, and printing a rough draft version really helped in the design of this. This like the ramps an
    1 point
  9. Version 2.0.0

    121 downloads

    A filament guide which can adapt itself to different diameters and widths of the spool. Improvements to the first version: - The version 2 (the white parts on the pictures) can now catch and release the filament without pulling it back. - Thanks to a snap connection between the holder and the sphere no glue is required anymore.
    1 point
  10. Version 1.0.0

    306 downloads

    Here is my full size Velociraptor skeleton. Juste made for the challenge. Lenght: ~180cm Sculpted with Zbrush. Total printing time: ~392h. Printer: Ultimaker2+ Filament: PLA Speed: 30mm/s - 50mm/s Nozzle: 0,4mm Layers: 0,15mm Painting : acrylic paint (spray and brushe)
    1 point
  11. Version 1.0.0

    129 downloads

    Only a specific sequence of steps will allow access to its secret compartment. Check out the YouTube video to see it in action. Made up of 36 separate pieces, it all snaps together to complete the finished product. Because of the number of parts and the complicated assembly, I created a few aids to help out. I've included a parts list and a part identification guide, plus created a special YouTube video detailing the assembly process. Printing all of the pieces requires about 150 hours of printing and lots of PVA support material. I suggest watching all or part of the assembly vid
    1 point
  12. Version 1.0.0

    345 downloads

    elegant swinging smartphone stand The idea was a smartphone stand, where you have the ability to connect your standard charging cable... ... and then inspiration began to flow...
    1 point
  13. Version 1.0

    482 downloads

    Star Wars Porg!
    1 point
  14. Version 1.0

    270 downloads

    3D Print a 1:100 scale concept model for a house, the dominant repeated ribs and front loft space accessed by a spiral stair recall timber framed ships. Printed on the Ultimaker 3 we used the standard medium print settings for most of the model, with the high settings required for some of the highly intricate pieces like the screens.
    1 point
  15. Version 1.0

    160 downloads

    T-Rex Skull
    1 point
  16. Version 1.0

    530 downloads

    Printed in Extrudr GreenTec on my "GudoMaker" (heavily modded UMO+). No painting, only matte clear coating after some light sanding.
    1 point
  17. Version 1.0

    1,339 downloads

    not the best paint job; still a WIP.
    1 point
  18. Version 1.0

    1,761 downloads

    Since I'm been waiting for Star Wars Force Awakens to come out soon, I decided to model the Resistance X-Wing on 3ds Max and I used the trailer for reference. I have tested and printed using Ultimaker 2, and It was very interesting of trying to get the right shape of the new X-Wing ship.
    1 point
  19. Version 1.0

    2,946 downloads

    T800 Printed and airbrushed.
    1 point
  20. Version 1.0

    1,869 downloads

    The main bulk was printed on my Ultimaker2 with some of the smaller parts printed on a Form2
    1 point
  21. Version 1.0

    3,044 downloads

    Print size: ~200mmX150mm
    1 point
  22. Version 1.0

    1,419 downloads

    Material : polymax, made by Polymaker. This project is sponsored by Dagoma, Filo3D and Makershop.
    1 point
  23. Version 1.0

    849 downloads

    An opulent trophy for our building's monthly Trivia night. Embellished with the finest 24-carat gold (-colored spray paint) plating and gemstone (-looking beads). A brain is nestled within and perched atop one finds a tiny crown to finish it all off.
    1 point
  24. Version 1.0

    879 downloads

    Do you like plants? How about modern architecture and geometric patterning?
    1 point
  25. Version 1.0

    4,422 downloads

    As time allows I am doing some test prints on my new Ultimaker 3 using various materials. I am also doing some of the same tests on a two year old Ultimaker 2, recently promoted to a 2+, for comparison purposes. See my blog for the rest of the images and commentary.
    1 point
  26. Version 1.0

    1,257 downloads

    I reprinted my unicron model because I felt like painting it, but seeing as I haven't painted minatures in like 25 years i'm not that good anymore the acetoning was also too much and it cracked after spraying for some reason, but it serves its purpose. will do one with led eyes and a battery next after some remodelling. ive been away too long and feel like i need to start over.....:(
    1 point
  27. Version 1.0

    2,064 downloads

    My take on John Carpenters 1982 monster movie 'The Thing'. Was going to do The Prodigy Jilted Generation cover, but that was 90's and i wanted to try something harder....
    1 point
  28. Version 1.0

    1,203 downloads

    Sorry for the lame photo, but I demolished this one experimenting on it a few hours later, lol. Obviously from the Gladiator movie, not perfect but you get the drift. Might do a moving version, if i have time, but this one is all one print, no gluing or construction.
    1 point
  29. Version 1.0

    3,333 downloads

    Designed for the start of the Tour de France in Utrecht.
    1 point
  30. Version 1.0

    1,256 downloads

    Remake of a great album and cover art. I'll metalize it soon and post the pics later, busy on something else at the mo...
    1 point
  31. Version 1.0

    5,674 downloads

    Just a mini circular saw I printed to accompany my mini drill. I also Printed little brief cases for them to go in as you can see in the video
    1 point
  32. Version 1.0

    1,290 downloads

    My first shoe design in 3-D
    1 point
  33. Version 1.0

    5,485 downloads

    First print with HD glass is superb!
    1 point
This leaderboard is set to Amsterdam/GMT+01:00
×
×
  • Create New...