Jump to content
Ultimaker Community of 3D Printing Experts

Leaderboard

Popular Content

Showing content with the highest reputation on 06/26/2016 in all areas

  1. For the last week I have been experimenting with Machinable Wax. The Machinable Wax website suggests the details for 3D printing.. nozzle temp=140-150 degC bed temp=65-75 degC fans=on print speed=20-70mm/s These are the finding using a 0.4 nozzle, and layer height=0.2mm The first thing I found was the nozzle temp. had to be increased to 175-180 degC as nothing would come out of the nozzle at temps. below 170 degC. The second I found was to turn the fans off, otherwise the print would lift from the bed. The biggest problem I found was keeping the 3D print on the bed. I tried hair spr
    1 point
  2. J'avais commencé a écrire une autre réponse mais au final, je n'ai qu'une question : es-tu vraiment sérieux ?
    1 point
  3. for casting I use MoldLay, prints at 180 temp., sticks on (cold) blue tape
    1 point
  4. Randino: Do you not see the irony of your argument?
    1 point
This leaderboard is set to Amsterdam/GMT+02:00
×
×
  • Create New...