Jump to content
Ultimaker Community of 3D Printing Experts

Leaderboard

Popular Content

Showing content with the highest reputation on 05/26/2019 in Posts

  1. Birdfeed holder, to attach the bird feeder to the new small tree in our garden, with branches too thin, but with a 40 mm diameter trunk. Fixed with two velcro stripes. Filament is Nylon transparent from Ultimaker, construction with Fusion 360.
    2 points
  2. A new plugin is joining the plugin family! The CATIA plugin comes basically with the features you know from the others (if you had a chance to use them before).[1] The plugin can be easily downloaded and installed on my website. You can find a very basic checklist of what needs to be done here: https://thopiekar.eu/cura/cad/catia/ Enjoy and happy designing! -------------------------------------------- [1] https://thopiekar.eu:5443/cura-cad-integration/CuraCatiaPlugin/commit/9413a9961f0782a152b9bd878adcb23ade342cbb ------------
    1 point
  3. Thanks. Software side it works basically the same as Mark 2, hence similar CURA and E3D profiles. Nice post. The 1.75 hotend runs with a custom 6.35 OD 2 ID PTFE bowden tube, sold by the same Taobao seller. The major advantage of this PTFE hotend is that there is pretty much no chance of nozzle jam or clog for PLA even with frequent long retractions. With the PI insulator ring applied, the PTFE last much longer and can also handle high temp materials. As for using E3D heatbreak, the current heatsink probably won't be able to cool it down properly because the surface area i
    1 point
  4. Made these 2 custom downspout diverters. Each one is a different angle. Used openScad to design. S5 to print. zero support was needed. Oh - also the brown barrel has a white hose clamp that I modeled in DSM and printed with Nylon filament.
    1 point
  5. Hello! I'm fairly new to 3D Printing, building from a kit I've learned waaaaaaay too much about everything 😛 I've been learning Fusion 360 and fancied making a Mario Kart trophy. I found a really nice star medal on thingiverse so remixed it into it's own trophy with stand. I then thought I'd try some gold spray paint on the star. Never used spray paint before and laid it on a little too thick. That's fine though. Doing things wrong when learning is OK 🙂 Here is the thingiverse link: https://www.thingiverse.com/thing:3591947
    1 point
  6. I'm totally in favor of this not being a plugin though. It makes sense for this to live in the "mainline" Cura code. So if you're up for it, make a pull request.
    1 point
This leaderboard is set to Amsterdam/GMT+02:00
×
×
  • Create New...