Jump to content
Ultimaker Community of 3D Printing Experts
  • Sign Up

Leaderboard


Popular Content

Showing content with the highest reputation on 08/13/2019 in all areas

  1. 2 points
    You could try rotating it 90 degrees.The problem is that printers aren't simultaneous 3d so the Z will always be in small steps because they can't move all three axis at the same time. I work with cnc's and printer is what we refer to at 21/2D.
  2. 1 point
    You can't. They don't have enough room to store the entire xml file. They just hold an identifier (the GUID) that links them with an xml profile.
  3. 1 point
    CuraEngine doesn't have default values (or well; it gets them from the fdmprinter.def.json). So in order for this to work, it needs to know where to find the file.
  4. 1 point
    I figured out how to access Ultimaker API with Node.js: https://medium.com/@davidhq/internet-of-beautiful-things-27a3f42035eb
  5. 1 point

    Version 1.0

    5,643 downloads

    To improve the CNC Router and not just to drill stuff, I also wanted to cut materials like cardboard, vinyl, paper, etc. Before to buy a lasercut, I did find in Internet a very interesting tool to transform the Spindle into a cutting machine. I wanted to buy the knife tool, but my spindle collet is 8mm, and most of the tools I saw doesn´t fit on it, so I decide to make my own, and after some failed prototypes and test, I made one that until now, after several test it works just great!. The blade can be coupled in two different positions, with a cut depth of 6mm or 10mm. Component list: - 2x bearings with 8mm inner diameter - 1x 8mm x 50mm rod - 2x collar - 9x M3 30mm screws with nuts and washers - 2x M3 16mm screws with nuts and washers - Blades I spend like 30€ on components, but that´s because I bought more than I needed, just to have spare parts, and the 3D printed parts, cost like 2€ with a 2,2kg Colorfabb XT Spoon.
  6. 1 point

    Version 1.0

    1,411 downloads

    Unicron from 1986 Transformers Movie mess around, printed as is. i chopped the bottom off because i couldnt be bothered printing it in two halves.
This leaderboard is set to Amsterdam/GMT+02:00
×
×
  • Create New...