Leaderboard

Das ist 3 Jahre her... wie die Zeit vergeht...

You need to turn off supports. That’s what the light blue indicates. As for pausing, I’ve done the same thing but for some reason it only works when specifying the height by layer number.

If you loosen 2 screws at opposite diagonals then you can rotate them totally freely.

You could try running the STL file through http://service.netfabb.com It’s a free service that just requires registration.

Its for a Lego Car for a centerlock Its printed in Pla with Breakaway on UM S5

Hallo, Yesterday I printed a very small and fine torsion spring. I was very surprised how well that worked and how easily he printed the torsion spring. The spring has a diameter of 0.6mm theoretically and practically are 0.58-0.64mm. She is printed with a 0.25core and pla and breakaway from Ultimaker. The threaded nut has an M4 thread

a little Spring 😄

Hello together, some time ago I started 3D-printing RC-airplanes using Cura to generate the required G-codes. The way I go is that I just build the required volume models with a CAD programm and then print them with the "Cubic Infill" and one outer perimeter to get light but strong parts. To vary the strength within a part I use overlapping volumes and assign different infill values to them. (First the overlapping volumes, then the Infill without the outer perimeter) The "Cubic Infill" works quite well as an internal structure for wings and such, at leas

I am sure you will buy what you choose to but the original feeder is not (in my opinion) your best choice, the performance of the Bondtech is much superior

Took me forever to do this. And it is still rougher than I would have liked. 3D concept rendering: Finished piece:

This orange component removes the finished parts from the press. The part replaced an aluminum part, which in each case additionally had to be equipped with a teflon glider and was also much more expensive to manufacture. In addition, the 3d printed component was provided with a break point, which protects the upper punch against damage in the event of a crash.

Just thought I'd try to print some glasses on a model rather than adding ,(my photogrammetry scanned cousin). Glasses were scanned separately on a table by the way. Printing worked great but made the eyes harder to clean up being behind the glasses. Default support settings. Sprayed white. I'm starting to experiment with paint now... Pooh brown colorfabb at 0.06 Hopefully ill have a model in space by Monday, fingers crossed.

Hi, after many hours and prototypes my RC Mini Jet Boat is ready and online. You could find the files as download on https://cults3d.com/en/users/jtronics Follow us on Cults3d and on Youtube to get notice of our New Uploads!

And in case you are wondering if there are more variables, there are (lots of them): http://files.fieldofview.com/cura/Replacement_Patterns.html

Problem was that dilithium was very difficult with legislation, being an accidental space-time warp risk. So we removed that feature last second.