Jump to content
Ultimaker Community of 3D Printing Experts
  • Sign Up


Popular Content

Showing content with the highest reputation on 04/07/2020 in all areas

  1. 1 point
    See http://files.fieldofview.com/cura/Replacement_Patterns.html Most of that page parse the input from https://github.com/Ultimaker/Cura/blob/master/resources/definitions/fdmprinter.def.json into something more readable.
  2. 1 point
    It does not actually "override" the configured materials, it just ignores the material that is selected on the printer. The material configuration on the printer (from the "material" menu) can not be changed with gcode commands - so all-clear on this topic (IMHO). On the other hand... all (other) Marlin settings are "sticky" and stay active until the next explicit change. Not all of them are reset at the beginning of a print. This applies (e.g.) for acceleration settings and speed factors. That's why it's generally a good idea to reboot the printer between prints with different gcode flavors.
  3. 1 point
    I wanted to let you know you were correct on the assessment of the issue. I should have known better with a new piece of equipment that things move. The table was not level. I think I did not also have enough tension on the springs to help keep it level. I've leveled twice to make sure and it now prints all the way around. And, the sample files that came with the printer covered a small areas in the center of the table, so I imagine would not be affected by table issues. Thank you for taking the time to give me some guidance!
  4. 1 point
  5. 1 point
    I don't think there is a way to do this right now, sorry.
  6. 1 point
    thanks smartavionics, using the material command was the thing to do! from an earlier reddit post I made, someone else suggested which worked: M140 S{material_bed_temperature} ; heat bed, nonblocking M104 S{material_print_temperature} ; heat hotend in parallel ; DO THE RGB THING HERE M190 S{material_bed_temperature} ; heat bed, blocking M109 S{material_print_temperature} ; heat hot end, blocking
This leaderboard is set to Amsterdam/GMT+02:00
  • Create New...