Jump to content
Ultimaker Community of 3D Printing Experts

Leaderboard

Popular Content

Showing content with the highest reputation on 04/22/2020 in all areas

  1. So far, I just had this error the one time, about 4 weeks ago (had been using the Pro Bundle for about 2 months). Since then the S5 has basically been running non-stop, without happening again. I did not create a help ticket for this since it occurred just the one time, but I will if it occurs again.
    1 point
  2. I reset to factory settings, started from scratch and got it working. Not sure what the problem was but thanks for the feedback.
    1 point
  3. Hi Perchik, Welcome in here! The short belt tension method is here: https://support.ultimaker.com/hc/en-us/articles/360011802500 Here is a procedure for the adjustment of the two 6 mm shafts. https://ultimakernasupport.zendesk.com/hc/en-us/articles/115004168943-Aligning-the-Axes Side note: Adjustment tool (you need two each) for 8 mm to 6 mm shafts to make fixed distance from the 8 mm shaft to the 6 mm shaft. Here is two different tools and there is more of them out there.. Just p
    1 point
  4. My S5 started to make some unpleasant noises when the print bed moved up and down. The issue was in my case that the white plastic cover at the back of the print bed carriage has deformed over time. One of the through holes in the plastic cover moved and was now touching the z-axis rod. This could also happen to your S5 printer over time. I will try to explain what I did to solve the issue. I also took some pictures from the parts inside with some comments. Before the repair: https://www.dropbox.com/s/nt96xhdoyvbb1ex/Before_repair.mp4?dl=0 After the repair:
    1 point
  5. What the hell did you do to Cura... I changed from v3 to 4.5 and nothing works any more, profiles are gone, I cannot get any material working, NOT SUPPORTED everywhere. It is a real mess. I stick with 3.x, it also messes up my materials and does not save own profiles correctly, but at least it works.
    1 point
  6. A project file? Of a sliced project containing (a) 3d model(s) ? Are you sure you don't mean one of the Cura profile folders? From Windows 10 AppData/local, AppData/localLow or AppData/roaming. Where to send What files using What identifier/ticket id?
    1 point
  7. Its a new year now, and there hasn't been any more discussion on this thread, but I thought that I would add my comments.... found this while browsing to see what people are saying about the S5 Material Handler. I'm at a small US university, and we have 3 Stratasys products (Connex 500 $280K, Objet30 $34K, and a UprintPlus $25K in 2009... a forerunner to the F123 series), and we just got a UM S5 in July. We have about 6 3D printers total, including a Leapfrog Creatr (mixed feelings, not working now), a Robo 3DR1 (Excellent single nozzle machine, but we wore it out!), and a Craftbo
    1 point
This leaderboard is set to Amsterdam/GMT+01:00
×
×
  • Create New...