Jump to content
Ultimaker Community of 3D Printing Experts

Leaderboard

Popular Content

Showing content with the highest reputation on 05/08/2020 in all areas

  1. IT-departments never cease to surprise me... With a correct DHCP configuration you don't need static ip-addresses. Your DHCP server can be configured to always assign the same ip-address based on a once configured MAC address. Then, for the host name, DHCP has an option to change the hostname as well. So, with a well equipped IT-department they could handle it all themselves instead of you having to do crazy things (and we as well). Note that RFC-1035 says the length is limited to 63 characters. So why your IT-department comes with an 18-character limit is surprising. As a side effect of renaming: Cura won't be able to detect the printer anymore automatically, you will have to enter the ip-address instead. Changing the host name: - Ensure printer is in developer mode - Log in to the printer with SSH - type: vi /etc/rc.local - in line 4 you see a line starting with 'hostnamectl .... ' Mark this line as a comment by inserting a '#' as the first character - insert a new line 5: hostname my-fabulous-new-name - Save the file - reboot the printer with 'reboot' command - Log in again and - Check by giving the 'hostname' command without parameters. This change will have to be applied after every firmware update.
    2 points
  2. salut, Clic molette ça marche.
    1 point
  3. Eine STL-Datei kann die Farbe der Flächen enthalten. In Autodesk Inventor muss dazu beim Export der Hacken gesetzt sein. Manche "Viewer" unterstützen das vll. nicht. Grüße
    1 point
  4. Hallo Versuche es mal mit "öffnen mit" -> "andere App wählen" -> Cura wählen -> und Haken setzen bei "Immer diese App zum Öffnen von .stl Dateien verwenden" Gruß
    1 point
  5. I am having the exact same issue, and I'm on my 6th returned spool from UM support, all bad so far. This is a summary of what everyone has been saying: 1. PLA off the roll seems fine, I can usually print long print jobs. 2. Every day the PLA breaks at the point it's entering the extruder and has a very brittle area around this. 3. Once the PLA is "straightened" for a while it become brittle and break easily. here's a video showing my testing method and results. SO far the batch numbers I have been sent that are "bad" are: UM-7021b075 150508b04-11 UM-7021b075 150508b04-12 UM-7021b075 150508b04-6 UM-7021b075 150508b04-9 UM-7021b075 150508b04-317 UM-7021b075 150508b04-324 I have read before that UM changes sources for their PLA from time to time, I think they are buying from a new source that is sub-par with the quality we've all come to take for granted. The bad stuff is shrink wrapped with a desiccant pack inside. I got some silver rolls from them early this year(2015) with that was not shrink wrapped, it's great.
    1 point
This leaderboard is set to Amsterdam/GMT+02:00
×
×
  • Create New...