Jump to content
Ultimaker Community of 3D Printing Experts

Leaderboard

Popular Content

Showing content with the highest reputation on 12/19/2020 in all areas

  1. I just rebooted my S3 and my boot up screen is normal, that line effect you have showed kinda looks like the ribbon to the LED screen might not be fully plugged in right so is showing interference from time to time. So you might want to have it checked out to make sure its all plugged in right. If its new i would contact the reseller about it, who you could send it back to, or they might even tell you the steps how to do it yourself if you feel able to, just becareful if you do it yourself.
    1 point
  2. This is a piece of cake. In Cura, select Extensions / Post Processing / Modify Gcode Select "Add a Script" and then select Pause At Height In the dialog box for Pause at Height in "pause at" select By Layer (Height can be fooled by Z-hops) Remember that the layer you see in the Cura preview is a base 1 number, but gcode layers are base 0. So if you see in Cura that you want to pause at Layer 57, then in the dialog enter 56 (Cura layer - 1). Disarm timeout = 1800 (that's the max of 30 minutes) Park the head wherever you want to get it out of the way. I don't
    1 point
  3. If it is a new printer I would contact your reseller. The digital snow is not normal, I don't have it on my S3. Regarding the NFC issue, have you connected it in the correct socket on the back? The firmware update is normal I think, you can always "update" again if you want, but just via the menu, not as printer task with the yellow exclamation mark.
    1 point
  4. For anyone running Cura on a Mac wanting to add PETG inside CURA so your custom profiles display for PETG materials and the PETG custom material doesn't display in orange, I am now able to see and use any custom PETG materials by creating custom config files matched to printcore & PETG material type. I updated my Ultimaker 3 Extended firmware to 5.2.16.20200331 I noticed a popup inside Cura 4.8 when I opened it for the first time saying it was transmitting missing materials to the U3Ext, so that must be how they are on the printer now. I may have signed into my Ultimaker
    1 point
This leaderboard is set to Amsterdam/GMT+02:00
×
×
  • Create New...