[Post your latest print!]

Here is a print I did recently for a friend of mine, http://artbyglee.blogspot.com/ This was printed on my ultimaker at 60 microns. I posted a smaller test version of this a while back, this finished version was printed using cura 13.06

 

 

[Looking for beta testers.]

I recently upgraded to 13.06 and wow what a difference, it seems like everything is working much smoother and as expected now. Even with an older 8800gt video card slicing is fast and I have found cura to be all around quite responsive. The toolpath seems more intuative and i am getting much better fill inside the models. Very happy with current progress!

I have recently been running into some issues where prints hang part way through and it seems like this happens mostly when I complete a print, close the print window, delete the current model, load a new model and then click print. Part way through the following print it hangs on occasion, I experienced this 3 times this past weekend. My solution has been to just completely close down cura and unplug/plugin the printer between prints. Most of my prints were at .06m and in the 6-12 hours range. I have been printing regularly with cura for the past year and have not run into this issue before so I am fairly confident it is not hardware but cannot be 100% sure.

Keep up the great work!

 

[Post your latest print!]

Here is a print I did for a friend a while ago, just getting around to posting it now It was modeled by my friend in Zbrush and printed with cura/printrun.

[HELP "order processing" Log your SN# and Shipdate here]

Order # 1838

Ordered 3/18/2012

Payment confirmed 3/21/2012

Delivered 4/24/2012

built 4/28/2012

first print 4/29/2012

[HELP "order processing" Log your SN# and Shipdate here]

Order # 1838

Ordered 3/18/2012

Payment confirmed 3/21/2012