dinac
Dormant-
Posts
64 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Everything posted by dinac
-
Completly new hot end for UMO ?
dinac replied to dinac's topic in Third party products & modifications
I decided to try with : http://www.dhgate.com/store/product/ultimaker-original-umo-e3d-v6-hot-end-mount/257775521.html But, Amedee yes my UMO is from first batch. I dont have that teflon coupler. hm .... mine is from Aluminium. I will try to find a new one from Teflon , thanks man for help ! -
Completly new hot end for UMO ?
dinac replied to dinac's topic in Third party products & modifications
I saw this upgrade, but the costs are 500 EUR + Is there any other kit maybe ? -
Hey ! is there any completly new design with all necessary parts for construct the new hot end for Ultimaker Original , (first version of UM )? Original hot end keeps cloging and i dont want every time disassemble it. Bed thing is that i cant print any more, so I need complete kit for assemble. I am using 3mm filament and it is 90% PLA in it. Please can someone help me to decide what kit to buy ? I see E3Dv6 have some problems printing PLA . I found only these : http://www.dhgate.com/store/product/ultimaker-original-umo-e3d-v6-hot-end-mount/257775521.html http://www.ebay.com/itm/Extruder-0-4mm-Nozzle-v6-Hot-End-J-head-Mount-Holder-for-Ultimaker-3mm-Filament-/321835390829?hash=item4aeee2576d:g:rRAAAOSw~gRV0bBl Is there any other SET that is OK for UMO ? Please help thanks !
-
Cura 14.01 failed to write firmware 'Timeout' - solved
dinac replied to hjbinnema's topic in UltiMaker Cura
This did not helped me. I solve with disconnecting temp all temp sensors :S -
Cura 14.01 failed to write firmware 'Timeout' - solved
dinac replied to hjbinnema's topic in UltiMaker Cura
I am having this problem too. Yesterday i downloaded new CURA and run "first run wizzard " from CURA and flash MARLIN firmware. After that I cant connect to printer, neither flash again firmware. It stays at "Please connect the printer to your computer....." and nothing happens. I tried to compile and flash with ARDUINO, again no answer from Ultimaker.... Tried all USB ports, and nothing happens. But I see after that, when I power ON Ultimaker, all three motor are locked(i cant move extruder and hotend.) Please can someone help me? Is there any hard reset on UM or something like that ? Thanks ! -
Drawing with pencil/marker with ultimaker ?
dinac replied to dinac's topic in Third party products & modifications
i did not have time ... but i will try .. -
Drawing with pencil/marker with ultimaker ?
dinac replied to dinac's topic in Third party products & modifications
i found some interesting topics about making PCB and marker pen : http://reprap.org/wiki/Plotting http://capolight.wordpress.com/2012/04/30/converting_images_to_gcode/ http://additive-edge.blogspot.se/ https://ultimachine.com/content/printing-circuit-boards-mendel -
Where did u find 13.05 AM i blind or ?
-
I sterted printing with ABS, and I am getting this things . that thicker area is when it prints full solid layers without fill
-
Running HOT BED with SSRelay - fail
dinac replied to dinac's topic in Third party products & modifications
OK, did I do something bad to this SSR ? wiring was OK =? -
yes indeed there are some minor bugs about setting temp.. setting manually temps solve the problem .
-
When i am printing in CURA with heated bed engaged, it turn it off after cca 2 mins .. Bug or i am missing some option in CURA ?
-
Running HOT BED with SSRelay - fail
dinac replied to dinac's topic in Third party products & modifications
I know for heatsink, but it is designed for 25 A, i tought that this 8-9 A will be nothing fot it. It is connected now with mechanical relay.... But i have another Q - in Marlin, is there any code that for controling when it start heating and stop heating . If set let say temp= 100 oC why not heat to 102, then turn off relay- till it reach 98 oC and then again turn on relay. Insted of - when reach 100,xy it shout down relay, and on 99,9 it turn on again ... many clicks for controlling temp it is not neccesery to be exact 100oC... -
in everybody configuration.h stays this code : #define DEFAULT_AXIS_STEPS_PER_UNIT {78.7402,78.7402,200*8/3,760*1.1} // default steps per unit for ultimaker This last Number 760*1.1 gives 836 steps per E I think that beside this code it should be comment that is missing everybody: 760*1.1 is for new bolt - think it is v3 version ......but many of us that have v2 bolt and made hot bed this is not working good- it shold be 865 I think that this must be commented in code, because many that must compile new FW for HOTBED will run in problem of extruding to small amount of filament.....
-
electromagnet closing gate is answer
-
Running HOT BED with SSRelay - fail
dinac replied to dinac's topic in Third party products & modifications
OK, I wired again all like you said above bolded : and it is working again it is heating bed, but with only 9,6 V and it draws 7,2A Output from Power supply is 12,50V -relay is eating 3Volts Dont know what is going on I will try to heat to 100 oC, maybe SSR will blow up forever EDIT: working LED on relay stoped working, but relay is still operational, but it is heating like hell :twisted: -
Running HOT BED with SSRelay - fail
dinac replied to dinac's topic in Third party products & modifications
it was connected like this : HBed was warmed up to 80 oC for cca 8 mins, then i realised that something is smelling After that i turn off all, checked all, and tried again, but BED is getting only 3 V@ 2 amps so SSR is obviously not working any more LOL -
Ok, i ended all, my Solid state relay came, connected, but after 5 mins relay is so damn hot that it started to melt lol my IR temerature thermometer said over 150 degreed Celsius on relay :shock: where is the catch ? SSR is SSR25DD , 25 Amps Heated bed drawn only 8 Amps
-
Need firmware hex file with heated bed
dinac replied to hreedijk's topic in Third party products & modifications
Daid, when will be FW again online ? -
Yes, Daid must implement Jitter
-
i order 298 , and cant put on pulley to short to function machine properly
-
tnx ! i know for them, but they are out of stock for that glowbug
-
can someone can recommend where to buy Glow In Dark green PLA 3mm ? Iam located in Croatia - Europe I dont need much of these, maybe 0,5kg or so.