gedp

That would indeed be a nice option and not to difficult to implement I guess

Thanks!

Hi, I thought, when a print job was finished, I could start the same job again from the front printer panel without going through Cura on my mac. Have I dreamed or am I looking over it? Thx, Geert

All, Thanks for the info. I'll order some new rolls. Geert

Hi, I'm quite new to ultimaker (approx 7 weeks). When I ordered, I also ordered a spool of white PLA. The Ultimaker included also a spool of ugly gold color. However, every print I made with the gold colored PLA was extremely well and very uniform. Since switching to the white PLA, half of the prints failed because the filament was not fed anymore. I printed Bertho's extruder drive upgrade from thingiverse and installed that. 3 prints further, filament still feeding. But: the prints are very on-uniform. Every now and then, it seems there is not enough material deposited. Could it be that the PLA from Ultimaker is no good? Or do I have another problem somewhere? Any help would be appreciated. Pls check the attached photos. One shows my latest (still running test)(don't mind the colors: where sharpie marks to see if filament still feeding). The other shows the same gcode, but with the gold filament. Unfortunately, I only have the epoxied version left, but even without the epoxy layer, it was near perfect. Geert