Jump to content

backsubzero

Dormant
  • Content Count

    4
  • Joined

  • Last visited

    Never

Community Reputation

0 Neutral
  1. I disable in your form, but not work, I'm not need SD and LCD in my small machine... Thanks for help.
  2. I try to build for arduino 328, I select in Hardware board type Duemilanove w/ATMega328 pin assignments and Arduino hardware Duemilanove w/ATMega328, but not work, and show this erros. Build log In file included from Marlin/Marlin/Marlin.h:26:0, from Marlin/Marlin/Sd2Card.cpp:20: Marlin/Marlin/pins.h:447:2: error: #error Oops! Make sure you have 'Arduino Duemilanove w/ ATMega328' selected from the 'Tools -> Boards' menu. In file included from Marlin/Marlin/Marlin.h:26:0, from Marlin/Marlin/stepper.cpp:24: Marlin/Marlin/pins.h:447:2: error: #error Oops! Make sure you have 'Arduino Duemilanove w/ ATMega328' selected from the 'Tools -> Boards' menu. Marlin/Marlin/stepper.cpp:822:1: error: pasting "DIO" and "-" does not give a valid preprocessing token Marlin/Marlin/stepper.cpp:822:1: error: invalid suffix "_RPORT" on integer constant Marlin/Marlin/stepper.cpp:822:1: error: pasting "DIO" and "-" does not give a valid preprocessing token Marlin/Marlin/stepper.cpp:822:1: error: invalid suffix "_WPORT" on integer constant Marlin/Marlin/stepper.cpp: In function 'void st_init()': Marlin/Marlin/stepper.cpp:822:1: error: 'DIO' was not declared in this scope Marlin/Marlin/stepper.cpp:827:1: error: 'DIO' was not declared in this scope Marlin/Marlin/stepper.cpp:843:1: error: 'DIO' was not declared in this scope In file included from Marlin/Marlin/Marlin.h:26:0, from Marlin/Marlin/SdBaseFile.cpp:21: Marlin/Marlin/pins.h:447:2: error: #error Oops! Make sure you have 'Arduino Duemilanove w/ ATMega328' selected from the 'Tools -> Boards' menu. In file included from Marlin/Marlin/Marlin.h:26:0, from Marlin/Marlin/SdVolume.cpp:20: Marlin/Marlin/pins.h:447:2: error: #error Oops! Make sure you have 'Arduino Duemilanove w/ ATMega328' selected from the 'Tools -> Boards' menu. In file included from Marlin/Marlin/Marlin.h:26:0, from Marlin/Marlin/SdFile.cpp:20: Marlin/Marlin/pins.h:447:2: error: #error Oops! Make sure you have 'Arduino Duemilanove w/ ATMega328' selected from the 'Tools -> Boards' menu. In file included from Marlin/Marlin/Marlin.h:26:0, from Marlin/Marlin/Marlin.cpp:30: Marlin/Marlin/pins.h:447:2: error: #error Oops! Make sure you have 'Arduino Duemilanove w/ ATMega328' selected from the 'Tools -> Boards' menu. In file included from Marlin/Marlin/Marlin.h:26:0, from Marlin/Marlin/temperature.cpp:32: Marlin/Marlin/pins.h:447:2: error: #error Oops! Make sure you have 'Arduino Duemilanove w/ ATMega328' selected from the 'Tools -> Boards' menu. In file included from Marlin/Marlin/Marlin.h:26:0, from Marlin/Marlin/MarlinSerial.cpp:23: Marlin/Marlin/pins.h:447:2: error: #error Oops! Make sure you have 'Arduino Duemilanove w/ ATMega328' selected from the 'Tools -> Boards' menu. In file included from Marlin/Marlin/Marlin.h:26:0, from Marlin/Marlin/cardreader.cpp:1: Marlin/Marlin/pins.h:447:2: error: #error Oops! Make sure you have 'Arduino Duemilanove w/ ATMega328' selected from the 'Tools -> Boards' menu. In file included from Marlin/Marlin/Marlin.h:26:0, from Marlin/Marlin/motion_control.cpp:22: Marlin/Marlin/pins.h:447:2: error: #error Oops! Make sure you have 'Arduino Duemilanove w/ ATMega328' selected from the 'Tools -> Boards' menu. In file included from Marlin/Marlin/Marlin.h:26:0, from Marlin/Marlin/planner.cpp:54: Marlin/Marlin/pins.h:447:2: error: #error Oops! Make sure you have 'Arduino Duemilanove w/ ATMega328' selected from the 'Tools -> Boards' menu. In file included from Marlin/Marlin/Marlin.h:26:0, from Marlin/Marlin/SdFatUtil.cpp:20:
  3. Daid, prinrboard the more I use and works well, how could you do that? ok, if there is a way to do this, how can I compile for the 328, I tried several times and could not, as I have spend way to do this? Arduino 1.0.1 :( Thanks for help.
  4. how can I compile for arduino Leonardo or one bearing the Atmel328? I run everything that does not work .... I suppose I should be wrong, can someone help me? I would love to use in Leonardo is more stable because his communication with the PC.
×
×
  • Create New...

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!