filip
-
Posts
20 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by filip
-
-
Is the best way to save a profile (ini) file and to copy from there ?
Or should it be a feature in Cura ?
nozzle_size = 0.4
layer_height = 0.2
wall_thickness = 0.8
retraction_enable = False
solid_layer_thickness = 0.6
fill_density = 20
skirt_line_count = 2
skirt_gap = 3.0
print_speed = 20
print_temperature = 230
support = None
enable_raft = False
filament_density = 1.00
retraction_min_travel = 5.0
retraction_speed = 40.0
retraction_amount = 4.5
retraction_extra = 0.0
travel_speed = 150
max_z_speed = 3.0
bottom_layer_speed = 20
cool_min_layer_time = 10
fan_enabled = True
bottom_thickness = 0.3
enable_skin = False
extra_base_wall_thickness = 0.0
cool_min_feedrate = 10
fan_layer = 1
fan_speed = 100
fan_speed_max = 100
raft_margin = 5
raft_base_material_amount = 100
raft_interface_material_amount = 100
support_rate = 50
support_distance = 0.5
infill_type = Line
solid_top = True
fill_overlap = 15
bridge_speed = 100
sequence = Loops > Perimeter > Infill
force_first_layer_sequence = True
joris = False
retract_on_jumps_only = True
-
-
If I understand you well,
// M140 - Set bed target temp as end g-code does not work because it does not control your heated bed.
So the question is :
- can I connect the ulticontroller to my heated bed
- can I make a connection in series between the two "switches".
To cool down quickly, you could use
// M106 - Fan on
// G4 - Dwell S or P
// M107 - Fan of
I am just guessing.
-
Does this mean that Daid's Marlin builder does not work anymore ?
-
My port is COM43.
My email is philippeLaatditwegCasteleyn@hotmail.com
The children of Flanders will be grateful.
-
Would that not be a job for graphicall.org ?
-
I am not capable of compiling Doodle3D nor to install OpenFrameworks.
Does anyone have a Windows 7 32 bit compiled executable for me ?
https://github.com/Doodle3D/Doodle3D
-
-
You might consider another technology than extrusion.
Maybe if you are a popular person in some technical circles, you might recuperate a bit of the money.
Or if you live in a tourist area.
-
Well, that will keep me busy for a while
-
I have not found yet a paper about Ultimaker. I mean :
- a study of the mechanics with a lot of sinuses and cosinuses.
- about the stiffness of the frame
- the electronics and the programming
- thermodynamics
-
It was taken some minutes after the printing. I don't remember well.
Next ? time I might try a thermal video. A couple of second of printing and of cooling. What size and format does this forum allow ?
Or, if there is a majority vote, I could delete this thread and forget the Whole thing.
-
Omdat de zaal dan toch niet beschikbaar is, wordt de datum vrijdag terrathree nadazero november.
-
I don't have easy access to the IR camera.
Could I do it right ? With black stickers ?
I cannot zoom in in IRSoft, or am I wrong again ?
And Robert, how do you know that the temperature is 40 degrees ?
-
I am trying to show that people comment without reading everything.
-
I don't like to fight forum policy, but here it is.
-
Not in IRSoft and not in Windows Photo Viewer.
-
Just for fun. I did not adjust the emissivity. The PEEK is not hotter thAn the brass.
Sorry, I cannot do it, the extension bmt is not allowed.
-
Beste allemaal
Vrijdag 30 november 2012 wordt een hele speciale bijeenkomst want Philippe Casteleyn komt zijn 3D printer demonstreren.
We kennen Phillippe nog van zijn vorige lezing over Blender, Arduino en 3D laten printen. Nu is hij een stap verder want als alles mee zit, wordt er ter plekke geprint. Zoals u kan lezen in zijn aankondiging, is die avond veel, heel veel mogelijk.
Geen idee hoeveel mensen er binnen mogen in 't zaaltje van 't Hof Van Rieth https://maps.google.com/maps?q=Cafe+Hof+Van+Rieth%2c+Molenlei+68%2c+Mortsel%2c+Belgi%C3%AB&hl=nl&ie=UTF8&sll=37.0625%2c-95.677068&sspn=64.92025%2c98.4375&oq=%27t+hof+van+rieth&hq=Cafe+Hof+Van+Rieth%2c&hnear=Molenlei+68%2c+2640+Mortsel%2c+Antwerpen%2c+Vlaams+Gewest%2c+Belgi%C3%AB&t=m&z=17%3e, maar "men zegge het voort want iedereen is welkom". Breng u vrienden mee.
Een reminder volgt nog.
mvg Frank
RISCOS.be
__________________________________________________________________________________________________
Ik heb de Ultimaker pas 2 weken, dus veel weet ik er niet van.
Om 20.00 h zal ik de print demonteren en de bekabeling volgen.
Vervolgens zullen we iets eenvoudigs van Thingiverse halen en printen.
Daarna zullen we zelf iets tekenen en de bestanden bekijken en printen (3D).
De parameters van G-code slicing bekijken.
Ofwel kunnen we meteen een meegebracht ontwerp printen.
Als jullie iemand kennen met ervaring, breng hem dan zeker mee.
Mijn printer is van :
hardware :
http://www.thingiverse.com/thing:8563
software :
https://github.com/Ultimaker/toolhead-lib
Een andere fabrikant :
Enkele fabrikanten op Kickstarter :
http://www.kickstarter.com/projects/sea ... 3d+printer
De organisator van het bouwweekend :
De filosofie erachter :
http://www.repairablemachines.com/
Modellen te vinden op :
Of zelf maken met :
Of scannen met :
Andere doe het zelf op :
G-code generator aangeraden door Ultimaker :
Andere software
http://www.makerbot.com/makerware/#features
Wil er iemand Cura en Blender installeren op zijn snelle laptop ? Mijn laptop is immers onbetrouwbaar en traag.
Presentation in Mechelen on monday 4 february (dutch only)
in Coffee corner
Posted
Om 20 u 15.
http://www.hcc-vl.be/d001/content/3d-printen