Jump to content

ultibrain

Dormant
  • Posts

    104
  • Joined

  • Last visited

Everything posted by ultibrain

  1. Lastig probleem. Had ik laatst ook, heeft te maken met de drivers van je grafische kaart. Je kan deze deïsntalleren/installeren. (Uiteraard op eigen risico ;-)) Probeer voordat je het opnieuw installeert Cura even uit. Er is kans datie het dan al doet.
  2. Have the same pet peeve. The default setting of brim for platform adhesion: is there a way to set it default to skirt.
  3. There are a lot of filaments around. A lot of them are REALLY bad. I only use premium brands these days.
  4. I just read the statement. My real inconvenience now is that I cannot get a reliable estimate on delivery of the parts. A suggestion for a real sorry would be the following. Why not deliver a spare print head with the new sensor and heater on my doormat soon. And please o please a set of bed clips, my fingers hurt. Just leave out the parts I don't need. I really don't need the new extruder, the rods, or the valentine style gift wrap box or extra nozzles. I already invested in BondTech extruder (which in my humble opinion is MUCH better than de extruder that's in the upgrade package). I already own the Olsson block. Set priorities right and just deliver me the parts I need for a low price to make up for the inconveniences. To make up for all these underextrusion problems that have troubled me since the day I bought my UM2. This would definitely bring back my love for the Ultimaker company. Or at least a bit.
  5. Just wondering what will happen if I run let's say 3 spools of CopperFill through this feeder (this material is abbrasive!). Wil it survive? Any idea on which parts need to be replaced if this happens?
  6. I've had the BondTech on my Kossel delta for months. It just pushes the filament right, I really do like it, and it's a marvelous piece of engineering. So I decided to go for the BondTech on both of my UM2's.
  7. Hi there, Ik rijdt vanavond vanuit Schiedam naar de meet. Ik vertrek zo tegen half zes. Als iemand mee wil rijden, dat kan, ik kan ophalen en afzetten bij station Schiedam. Voor degene die komt. Is er iemand die voor mij een set reserve lagertjes mee zou willen nemen? Mijn printer 'tikt'. Ik wil proberen of dat te verhelpen is door een nieuwe set lagers te monteren. Het gaat om de ball bearings (niet de koperen...). Groet! Merijn
  8. ZBrush... doesn't surprise me :-) For simple support work I use Cura. Statues from animals, people, I use preferrably Meshmixer. But also Simplify3D sometimes comes to the rescue... What I like about Meshmixer is you can draw in supports manually and so have perfect control where the supports are put. Sometimes the program crashes but most of the times the program does it job nicely!
  9. Wow qmaker this looks amazing!!!! Just a question: how is the model created?
  10. Het schijnt dat van de 3d prints gipmallen zijn gemaakt, en dat die in grote getalen zijn gegoten! En vervolgens stuk voor stuk met de hand geschilderd. Ik ken iemand die hierbij betrokken is geweest. Misschien is de making of een story die hier op de Ultimaker site gepost zou kunnen worden.
  11. From the initial question. If parameterization is needed. Depends a littlebit on what kind of models you would like to create. - DSM/SpaceClaim: no history, so if you make a mistake at the beginning of you're model, this software is very forgiving.... - Fusion360: interesting piece of software. didn't steal my heart (yet...) - Rhino: With grasshopper you get parameterization to the max. Just spend some time with it, it's really untuïtive but you need to learn the basics. Also when you make your decision. Spent at least several months creating lotz of designs. And then draw conclusions. As a 3d modeler it's common to have several software packages in the toolbox! Did I already mention I really LOVE T-Splines and it's available for Rhino, and standard inside Fusion360?
  12. Leuk gedaan Arjan! Ik loop ook continu te klooien met die nozzles, dit zou iets voor mij zijn!
  13. Met 3dhubs kun je wel printen voor bedrijven. Alleen komen daar meestal mensen/bedrijven terecht die al een model hebben..... Alhoewel er zo nu en dan ook design vragen langskomen. Ik zou je in ieder geval daar aansluiten. En in je profiel wat werk uit je portfolio vermelden.
  14. Op 2 november is er weer een avondje 3d printen bij Het Lab Rotterdam! Neem je Ultimaker of andere 3d printer mee, en laat je inspireren! Mocht je nog geen printer hebben, ook dan ben je van harte welkom! Ik neem zelf ook mijn Ultimaker mee, en het ijkt me leuk om die avond wat meer Ultimakers te gaan zien! Voor soep wordt verzorgd, een kleine bijdrage hiervoor wordt op prijs gesteld. Je kan je aanmelden bij 3hubs of via een reply op dit bericht! https://www.3dhubs.com/rotterdam/events/3d-printen-bij-het-lab-rotterdam Het adres is Beukelsdijk 91A in Rotterdam. Het zit bij het Lyceum, links van de hoofdingang!
  15. Very cool. Did you notice any difference on extrusion while using this deflector?
  16. Probably the layer view is right, it's just showing the movments the printer is going to perform. I had some slicing issues solved by try turning off/on options in the Expert settings, in the Fix Horrible section.
  17. Er is onlangs een groot onderzoek geweest bij 3dhubs. Zie hier. Je zou zelf even na moeten gaan of 3dhubs ook verkoopcijfers meldt. Ik geloof dat 3dhubs daar ook informatie op de website heeft staan.
  18. Hi! Komende maandagavond 11 mei wordt er door Het Lab en ondergetekende weer een 3d print meetup georganiseerd. Het thema is 'Proud of your prints'. Je krijgt hier de gelegenheid jouw mooiste of lastigste print te presenteren, en te vertellen hoe je het gemaakt hebt! 18:30 - 19:00 inloop 19:00 - 19:15 voorstelrondje 19:15 - 21:00 korte presentaties met prints Uiteraard zal er ook geprint gaan worden, dus neem als je een printer hebt die mee! Heb je die niet: geen probleem, je bent dan ook van harte welkom! Ontvangst is om 18:30 bij Het Lyceum/Het Lab aan de Beukelsdijk 91 in Rotterdam. We gaan pizza's bestellen, je kan ze bij mij afrekenen. De eerste bestelling gaat om 18:45 de deur uit, mogelijk nog een tweede bestelling erachteraan. Als je komt: laat het graag even weten door een reply op deze post! Merijn van Mourik BubbleBit Software
  19. I ordered block/nozzles with 3dsolex, got this nice envelope with the block and some nozzles. Very fast delivery! I just mounted it. When warming up the colorfabb to 210 degrees, the filament literally leaks out of the nozzle by its own weight. Which is good! After watching a few layers put down on the build platform, it seems my underextrusion problems are totally gone! Ow man it's such a relief, big smile over here (the ear-to-ear smile).
  20. Turning the fan down to 25% seems to solve this problem for me...
  21. ultibrain

    Jos

    Version 1.0

    1,997 downloads

    I scanned this little guy a while ago. Jos was printed in ColorFabb PLA, Traffic Red. It was painted with XTC-3D finisher. The image is courtesy of Els.
  22. ultibrain

    Toplaag

    Excuus voor mijn late reactie. De cracks zitten over de hele breedte/lengte bij de tandjes. Het lijkt wel of de riem enorm is uitgedroogd. Ik vraag me af of dat normaal is.... De printer is in oktober 2014 aangeschaft...
  23. Hoi Olaf, Ik zit in Schiedam, ik zou je hiermee kunnen helpen. Je bent welkom! Merijn
  24. ultibrain

    Toplaag

    Ik heb de flow al op 120% gehad. Bij zo'n hoge flow print the bool uiteindelijk wel dicht, maar wat je dan vervolgens ziet is dat er lijnen deels op elkaar worden geprint. Dit is ook niet zo mooi... Het zichtbare symptoom is dat er steeds twee lijnen heel dicht tegen elkaar aanliggen, gevolgd door een grote 'gap' . Ik heb de lange belts bekeken, de spanning lijkt te laag te zijn. Verder zie ik 'cracks' zeg maar verouderd rubber van de belt. Ik denk dat de riem na 600 uur aan vervanging toe is, en dat er gewoon te veel speling in zit. Nu heeft die UM2 injection moulded belt tensioners. En van eentje is dus de sluiting gebroken. Dit was simpel te fixen met een tie wrap. Ik ga support contacten voor vervanging, want volgens mij is dat al vanaf het begin. Ik ben benieuwd of meer mensen dit probleem ervaren... en wat de maximale levensduur van die belt is. Of heb ik gewoon pech met mijn belts.
×
×
  • Create New...