mhk3000

Amedee, which pip version are you using. thanks

do we use "pip install power" because its asking for sudo to run the inter connected dependencies

Daid, I am working with the latest Cura in git and trying to build Cura for Max OSX 10.10. Initially I was getting a serial module not found, but now I am getting power module not found. I searched through package.sh, power module is not getting explicitly copied compare to builds of other platforms. Furthermore py2app is the correct required version. Any help here is greatly appreciated. thanks Mohammed Mohammeds-MacBook-Air:Cura MacBookAirMHK$ Cura/Cura.app/Contents/MacOS/Cura load preferences from /Users/MacBookAirMHK/Library/Application Support/Cura/14.11-RC7/preferences.ini Traceback (most recent call last): File "/Users/MacBookAirMHK/3DPrinting/Cura/Cura/Cura.app/Contents/Resources/__boot__.py", line 320, in <module> _run() File "/Users/MacBookAirMHK/3DPrinting/Cura/Cura/Cura.app/Contents/Resources/__boot__.py", line 311, in _run exec(compile(source, path, 'exec'), globals(), globals()) File "/Users/MacBookAirMHK/3DPrinting/Cura/Cura/Cura.app/Contents/Resources/cura.py", line 89, in <module> main() File "/Users/MacBookAirMHK/3DPrinting/Cura/Cura/Cura.app/Contents/Resources/cura.py", line 86, in main app.CuraApp(args).MainLoop() File "Cura/gui/app.pyo", line 58, in __init__ File "Cura/gui/app.pyo", line 100, in afterSplashCallback File "Cura/gui/mainWindow.pyo", line 13, in <module> File "Cura/gui/preferencesDialog.pyo", line 5, in <module> File "Cura/gui/configWizard.pyo", line 13, in <module> File "Cura/gui/printWindow.pyo", line 4, in <module> ImportError: No module named power 2014-11-27 14:51:45.961 Cura[28689:227191] Cura Error

daid which version of Code blocks are you using gcc4.7.1 or gcc4.8.1 thanks

Daid, thanks for your reply. I have installed Codeblocks and still getting the following error. Also I am using a windoww 7 operating system C:\Github\CuraEngine>mingw32-make all The syntax of the command is incorrect. mingw32-make: [build/] Error 1 (ignored) The syntax of the command is incorrect. mingw32-make: [build/modelFile/] Error 1 (ignored) The syntax of the command is incorrect. mingw32-make: [build/utils/] Error 1 (ignored) g++ -c -Wall -Wextra -Wold-style-cast -Woverloaded-virtual -std=c++11 -DVERSION= \"DEV\" -isystem libs -O3 -fomit-frame-pointer -march=pentium4 -flto src/bridge. cpp -o build/bridge.o Assembler messages: Fatal error: can't create build/bridge.o: No such file or directory mingw32-make: *** [build/bridge.o] Error 1

Hello Daid, When I am using package.sh to build Cura.exe, the size of CuraEngine.exe is approximately half compared to CuraEngine.exe packaged with the release version from software.Ultimaker.com. Gcode toolpaths within my CuraEngine do not work on any machine other than the build machine I have shared a link of package.sh https://www.dropbox.com/s/9e1pgmbzrpsv889/package.sh?dl=0 And I have commented only the following lines #package the result if (( ${ARCHIVE_FOR_DISTRIBUTION} )); then if [ $BUILD_TARGET = "win32" ]; then #rm ${TARGET_DIR}.zip #cd ${TARGET_DIR} #7z a ../${TARGET_DIR}.zip * #cd .. #if [ -f '/cygdrive/c/Program\ Files\ \(x86\)/NSIS/makensis.exe' ]; then rm -rf scripts/win32/dist mv `pwd`/${TARGET_DIR} scripts/win32/dist 'makensis.exe' -DVERSION=${BUILD_NAME} 'scripts/win32/installer.nsi' >> log.txt mv scripts/win32/Cura_${BUILD_NAME}.exe ./ # fi else echo "Archiving to ${TARGET_DIR}.tar.gz" $TAR cfp - ${TARGET_DIR} | gzip --best -c > ${TARGET_DIR}.tar.gz fi else echo "Installed into ${TARGET_DIR}" fi

Hi do we use ming32-make-all to build CuraEngine.exe

Hello Daid Is there a feature whereI can read the gcode from one file and write the debug log statements to another file. thanks Mohammed

Hello Daid, Can you pls share the command line to run Cura on a Mac thanks

Hi Daid, I have installed mingw32-make and running make in the CuraEngine directory in the DOS prompt. I am getting the following error. Can you pls help us with set up of environment C:githubmhkCuraCuraEngine>mingw32-make all g++ -I. -c -Wall -Wextra -O3 -fomit-frame-pointer gcodeExport.cpp -o gcodeExport.o In file included from utils/intpoint.h:12, from utils/floatpoint.h:10, from settings.h:4, from gcodeExport.h:7, from gcodeExport.cpp:4: clipper/clipper.hpp:41: ostream: No such file or directory In file included from utils/floatpoint.h:10, from settings.h:4, from gcodeExport.h:7, from gcodeExport.cpp:4: utils/intpoint.h:15: stdint.h: No such file or directory In file included from settings.h:4, from gcodeExport.h:7, from gcodeExport.cpp:4: utils/floatpoint.h:12: stdint.h: No such file or directory In file included from gcodeExport.cpp:5: pathOrderOptimizer.h:5: stdint.h: No such file or directory mingw32-make: *** [gcodeExport.o] Error 1

Daid, I am also using mingw32 but having the same problem as above as the Exe is incomplete. Where do I get access to code block 12.11 on github Also can you specify which dlls are missing for me to build with cygwin. thanks Mohammed

Hello Daid, When I am running the Make utility for cygwin win7 for CuraEngine, I am getting CuraEngine.exe of only 367KB. This CuraEngine does not work with Cura The released CuraEngine.exe size is 1MB. I am synching from github.com/Ultimaker.com/CuraEngine.exe master branch. Any ideas?? thanks Mohammed

Hello, When I am making CuraEngine on my Win7 64 bit, I am getting the following error $ mingw32-make all g++ -I. -c -Wall -Wextra -O3 -fomit-frame-pointer main.cpp -o main.o In file included from main.cpp:34:0: gcodeExport.h: In member function ‘void GCodeExport::replaceTagInStart(const char*, const char*)’: gcodeExport.h:65:9: error: ‘off64_t’ was not declared in this scope off64_t oldPos = ftello64(f); ^ gcodeExport.h:65:17: error: expected ‘;’ before ‘oldPos’ off64_t oldPos = ftello64(f); ^ gcodeExport.h:68:32: error: ‘fseeko64’ was not declared in this scope fseeko64(f, 0, SEEK_SET); ^ gcodeExport.h:78:21: error: ‘oldPos’ was not declared in this scope fseeko64(f, oldPos, SEEK_SET); ^ C:mingwinmingw32-make.exe: *** [main.o] Error 1 any ideas thanks Mohammed

Sorry, Posted the above message, without a lot of description. I have set Dual Extrusion ON and trying to print support material with the second extruder. Mohammed

Hello Daid, The https://www.dropbox.com/s/ecaihp8lnw80osg/arc.gcode has the gcode file, there is no mention of T1 for the second extruder. Is this is a known issue. regards Mohammed

Has any tried printing with HDPE filament

Troy, ABS and HIPS (as support)is the most promising of all the lot, as HIPS easily dissolves in limonene and sticks well to ABS. Will be testing it next week. Furthermore, there is a problem with dissolving ABS in limonene for very long time, it becomes soft

Hello, Has anyone had good results for printing ABS and PVA (as support) material (Dual extrusion) on their ultimakers Thanks MHK

Hello, Any thoughts which is better 1.7mm or 3mm ABS for very long running prints. 14hrs+ I am thinking which is better for the grip of the gear. Thanks Mohammed

Hello, I am looking to source ABS 1.7mm which has high tensile strength 40MPa. The manufacturer should have a reputation of giving a very uniform cylindrical filament. Any ideas whom I can contact. thanks Mohammed

I would like to be a beta tester. thanks and regards Mohammed

I would like to be a beta tester. thanks and regards Mohammed

Daid, Does Cura 13.03 work with python 2.7.4

http://pythonhosted.org/pyobjc/install.html

Hi, I am running Mac 10.8.3. I am experimenting a bit. I symlinked python in /Applications/Cura/Cura.app/Contents/MacOS/Cura ln -s /Library/Frameworks/Python.framework/Versions/2.7/bin/python python Then i got the following error Mohammeds-MacBook-Air:MacOS MacBookAirMHK$ /Applications/Cura/Cura.app/Contents/MacOS/Cura Traceback (most recent call last): File "/Applications/Cura/Cura.app/Contents/Resources/__boot__.py", line 28, in <module> import ctypes File "/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/ctypes/__init__.py", line 10, in <module> from _ctypes import Union, Structure, Array ImportError: dlopen(/Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/lib-dynload/_ctypes.so, 2): Symbol not found: __PyInt_AsInt Referenced from: /Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/lib-dynload/_ctypes.so Expected in: flat namespace in /Library/Frameworks/Python.framework/Versions/2.7/lib/python2.7/lib-dynload/_ctypes.so 2013-04-09 12:23:18.263 Cura[558:707] Cura Error