markus-reinisch

with 250000 I could not connect with raspi when it set to 250000, with 115200 no problem. I use for my fair phone cases 14.07 cause it slices better, for normal things 14.12. I want to test 15.01. But when the printer doesn't work properly it's useless.

Jonny you're right 115200. I only know 115000. You can't select odd numbers.

I tested the new version and there is a problem with moving the printhead slow. Then my printhead begans to stutter and you can put the print in the trash. I've upgraded the firmware but I only use 115000 because with 250000 in speed seting for communication I can't use my printer with octoprint.

have you take a look in (user) and then /Library/Application Support/Cura/

thanks found it. Why cura copys the file to the new version? They are in folders for the cura versions.

not the print profile. The printer setting. I can't find them.

Everytime Cura gets an update the settings for all my printers are gone. Not the slicer setting, the settings for the printer. I got 3 printer profiles for different printers, and these are gone. Only one UM original is left. Where can I find them? So that I can copy from my Time Machine Backup this settings. I don't want to make new printers and make new settings for those.

Nur einmal so als Einwurf: http://www.clever3d.de/product_info.php?cPath=38&products_id=47 44€ kostet dort die Platte.

Hello Diad, step files please. Thanks

thanks daid, I will try it.

I print a lot with colourfabb PLA and sometimes when I print to hot I get this hairy look. Normal I print with 195 degrees and 40mm/s.

yes 2 times G92 E0 ;zero the extruded length G1 F200 E3 ;extrude 3mm of feed stock G92 E0 ;zero the extruded length again

Problem is I often places very complex parts in cura and it tries do slice these objects before I'am ready with placing and rotating them correct. This is no problem, if cura uses multicore processing (I got only 24 cores there should be enough power do slice the object instand, we discussed that in another tread) but when cura only uses one core it takes long until you can replace your object and rotate it. Is it possible to turn off the auto slicing and to the slicing when you press a button? Yes like the old days of cura. It might be a useful setting in new cura. Also I hope that a profile manager is integrated. I got 20-30 print profiles and always load the profile from the hard disk with clicking around in the folders is very time-consuming. Maybe you can change the profile folder to a standard one, so you don't have to search your profile folder?

https://dl.dropboxusercontent.com/u/26655663/3D%20Drucker/Bildschirmfoto%202014-09-11%20um%2009.49.22.png That's my issue with cura.

all wooden parts. perfect would be complete part list for 2. extruder. Is it possible do buy the inject molded parts (cause I got some problems) with my old filament extruder (made out of cutter wood)

drawings of 2. extruder for ultimaker 1

Where I find the drawings for the 2. extruder kit?

I'am a car engineer. And without fuel you can't go faster But I know what you mean.

no I'am not. But I'am slicing a lot of 3D objects and it would be a great improvement, when it is faster. Or with a good computer you can slice realtime. is the slicing process using CPU power or does it work with OpenGL?

Today I saw cura is only using one CPU for slicing. I got a 12 core Mac Pro and this is slower than my macbook pro when I slice objects. Maybe you can add multicore support?

I want to switch between my extruders. I'am to stupid, how can I do this? In Cura it is impossible.

no thats not the problem. When I insert the 2GB Card it refreshes directory instantly.

I know. These cards are 16MB and 32MB and are SD cards. The SD cards are ok. I can write and read on them in cameras and my computer. Only the ultimaker controller can't read them. I think it is a problem with the FAT System. I need the right one.

In the menu of the ulticontroller is shows No Card

So I finally got my ultimaker and it works nearly perfect. With the 2GB Card came with the ultimaker, I can work. I see the files. The Problem is. I've tried some other SD Card (yes old SD Cards from old Cameras), but they doesn't work. I only see card inserted. And an empty folder stucture. I've got a macbook pro and formated the card as MS-DOS file system. Is they problem the filesystem?