Not sure if there is a dedicated page to post option requests or bug submissions for cura but ill post this here for now.
I have been printing some parts that have the tool path below; as you can see the tool path crosses though the center of the cylinder to extrude the 2nd wall (or sometimes infill). This is the shortest path but and thus the quickest but it leaves little filament bloobs on the inside surface.
(I have retraction enables but it does not eliminate this issue).
Here is an image of the bloobes i am talking about; it makes the inside cylinder rough and makes using the inside threads extremely hard to use (mostly only after trying 10-20 times by grinding away the blobes.)
Sometimes cura has a layer that has a very nice tool path that eliminates these bloobes fully. It runs the toolpath along the outline/within the part thus leaving no bloobes on the outside surfaces. Image:
I need to print this part with some strength and the wall thickness increases further up the part so i can not simply use the 0 infill method to try to eliminate this problem.
Maybe there is a way to have an option like "body path only" that will keep the tool path only within the object to reduce the occurrence of these artifacts.
If anyone has an idea how i could fix this, perhaps with a custom code, please let me know.
Thanks in advace
MH
