spaturno

Problem solved. Thank you very much!

Hello everyone! I have a problem with Cura. These are pictures of the problem: http://i.imgur.com/6HzkN7d.png http://i.imgur.com/GEBleTm.png At layer 22-23 the extruder moves away, move up, come back, move down (one layer above the starting point) and tries to resume printing, with awful results: Looking at the gcode, i could find this: ;LAYER:23 ;TYPE:WALL-INNER ;TYPE:CUSTOM M83 G1 E-5.000000 F6000 G1 X190.000000 Y190.000000 F9000 G1 Z15 F300 M0 G1 E5.000000 F6000 G1 E-5.000000 F6000 G1 X122.903000 Y93.300000 F9000 G1 E5.000000 F6000 G1 F9000 M82 G1 X122.903 Y93.3 Z5.05 after which everything is fine again... It happens with every model. Printer is fine, same models with other slicers works just fine. EDIT: Same problem with versions 12.12 and 13.03. Any suggestion?