tomato-icn

thanks a lot, just tried - as far as I can see it only exports the following parameters in STL size, orientation. Shell thickness - no? Any solutions please? Thanks in advance!

Dear Daid, yeah I know you're sick and tired of various feature requests, but I must ask please = as Cura is the best 3d printing software at the moment, will you ever plan to implement STL EXPORT feature, I mean when model is scaled, rotated, supports generated, etc - so it will be possible to save this work as a new STL file, not just GCODE. Thank you so much in advance,

Dear community, what can cause this? Checked the wires and reconnected them carefully on PCB, and on small pcb again on hotend. This causing different color layers (darker and lighter). I set to 210, and it jumps from 205 to 215 :( Thank you!

Dear Daid, and community, current CURA 13.06.4 - is there any way to use JORIS as a plugin, in plugins section, I want it badly. If yes, please hand me a link to the file. Thanks in advance,

I still got the same problem on my both notebooks samsung and HP. I gave up didn't find the solution. sometimes it hangs the print - but pretty rare.

thanks a lot for quick respond! so the big brass nut should slide a little, please explain this moment, thank you! I suspect also the problem is in big brass nut.

Dear community, I've been fighting with this issue for a several days and I'm almost desperate: the problem is - my print started to have strange repeating lines. What I've done: carefully checked the X-Y axes - both are orthogonal, not bent, belts are tight, long and short ones (they are all tight and nice) - moreover while filling the surface I can see everything's alright, I even tried belt tensioneer - but they only reduce quality, so I don't use them. I also saw the wobbling Z-axis problem, so I reassembled and assembled Z-axis again, still no luck (checked the couplings and brass nut). Any ideas please? My prints now: My prints were:

+1. Confirm this too. I still get the same ERRORS about LINES. echo:Unknown command: " Error:Line Number is not Last Line Number+1, Last Line: 3 echo:Active Extruder: 0 Error:Line Number is not Last Line Number+1, Last Line: 3 Error:Line Number is not Last Line Number+1, Last Line: 5 Error:checksum mismatch, Last Line: 27 Error:No Line Number with checksum, Last Line: 27 Error:checksum mismatch, Last Line: 260 Error:Line Number is not Last Line Number+1, Last Line: 260 Error:No Checksum with line number, Last Line: 470 Error:Line Number is not Last Line Number+1, Last Line: 470 Error:No Line Number with checksum, Last Line: 470 Error:checksum mismatch, Last Line: 855 Error:No Line Number with checksum, Last Line: 855 Error:checksum mismatch, Last Line: 931 Error:Line Number is not Last Line Number+1, Last Line: 931 Error:checksum mismatch, Last Line: 1067 Error:checksum mismatch, Last Line: 1171 Error:Line Number is not Last Line Number+1, Last Line: 1171 Error:checksum mismatch, Last Line: 1233 Error:Line Number is not Last Line Number+1, Last Line: 1233 Error:checksum mismatch, Last Line: 1361 Error:checksum mismatch, Last Line: 1577 Error:Line Number is not Last Line Number+1, Last Line: 1577 Error:checksum mismatch, Last Line: 2409 Error:Line Number is not Last Line Number+1, Last Line: 2409 Error:No Line Number with checksum, Last Line: 2409 Error:checksum mismatch, Last Line: 2636 Error:Line Number is not Last Line Number+1, Last Line: 2636 Error:checksum mismatch, Last Line: 2824 Error:Line Number is not Last Line Number+1, Last Line: 2824 Error:checksum mismatch, Last Line: 3128 Error:Line Number is not Last Line Number+1, Last Line: 3128 Error:checksum mismatch, Last Line: 3653 Error:No Line Number with checksum, Last Line: 3653 Error:checksum mismatch, Last Line: 4601 Error:Line Number is not Last Line Number+1, Last Line: 4601 Error:checksum mismatch, Last Line: 4946 Error:No Line Number with checksum, Last Line: 4946 Error:checksum mismatch, Last Line: 5641 Error:Line Number is not Last Line Number+1, Last Line: 5641 Error:checksum mismatch, Last Line: 6549 Error:Line Number is not Last Line Number+1, Last Line: 6549 Error:checksum mismatch, Last Line: 6927 Error:No Line Number with checksum, Last Line: 6927 Error:checksum mismatch, Last Line: 7618 Error:No Line Number with checksum, Last Line: 7618 Error:checksum mismatch, Last Line: 8577 Error:checksum mismatch, Last Line: 9026 Error:Line Number is not Last Line Number+1, Last Line: 9026 Error:checksum mismatch, Last Line: 10189 Error:No Line Number with checksum, Last Line: 10189 Error:checksum mismatch, Last Line: 10682 Error:Line Number is not Last Line Number+1, Last Line: 1 All the time, sometimes my print finishes well, and sometimes IT STOPS in the middle with HOTEND melting my print, too sad, so sad. RESUME <--> PAUSE helps a little and hotends starts to move a little bit, but hardly finishes another layer and stops again, so the print is ruined again. Anyone? Thanks a lot.

thanks a lot for good advice my friend.

HP 625 notebook here, WIN7, not very powerful, but works pretty good, I don't have an Ulticontroller unfortunately.

very clever update, thanks for that, that was a pain sometimes. can you please comment on any possibility of item name poping up somewhere upon focusing on item or something like this, would be really useful in case of sevaral parts loaded. Thank you, Daid. We truly appreciate your hard work. Regards,

Dear community, Cura 13.06.3 All the time I print, I take a look at the TERM tab, and there are many lines like this: Error:Line Number is not Last Line Number+1, Last Line: 65110 Error:checksum mismatch, Last Line: 66064 Error:Line Number is not Last Line Number+1, Last Line: 66064 Error:Line Number is not Last Line Number+1, Last Line: 66065 Error:checksum mismatch, Last Line: 66917 Error:Line Number is not Last Line Number+1, Last Line: 66917 Error:No Line Number with checksum, Last Line: 66917 Error:checksum mismatch, Last Line: 67742 Error:Line Number is not Last Line Number+1, Last Line: 67742 Error:Line Number is not Last Line Number+1, Last Line: 67743 Error:Line Number is not Last Line Number+1, Last Line: 67744 Error:No Line Number with checksum, Last Line: 67744 Error:checksum mismatch, Last Line: 68570 Error:Line Number is not Last Line Number+1, Last Line: 68570 Error:checksum mismatch, Last Line: 69358 Error:Line Number is not Last Line Number+1, Last Line: 69358 Error:No Line Number with checksum, Last Line: 69358 Error:checksum mismatch, Last Line: 70182 Error:Line Number is not Last Line Number+1, Last Line: 70182 Error:Line Number is not Last Line Number+1, Last Line: 70183 Error:checksum mismatch, Last Line: 70977 Error:Line Number is not Last Line Number+1, Last Line: 70977 Error:No Line Number with checksum, Last Line: 70977 Error:checksum mismatch, Last Line: 71761 Error:Line Number is not Last Line Number+1, Last Line: 71761 Error:No Line Number with checksum, Last Line: 71761 Error:checksum mismatch, Last Line: 72581 Error:Line Number is not Last Line Number+1, Last Line: 72581 Error:Line Number is not Last Line Number+1, Last Line: 72582 Error:checksum mismatch, Last Line: 73410 Error:No Line Number with checksum, Last Line: 73410 Error:checksum mismatch, Last Line: 74277 Error:No Line Number with checksum, Last Line: 74277 Error:checksum mismatch, Last Line: 74823 Error:No Line Number with checksum, Last Line: 74823 Error:checksum mismatch, Last Line: 75695 Error:Line Number is not Last Line Number+1, Last Line: 75695 Error:Line Number is not Last Line Number+1, Last Line: 75695 Error:Line Number is not Last Line Number+1, Last Line: 75696 Error:Line Number is not Last Line Number+1, Last Line: 75696 Error:Line Number is not Last Line Number+1, Last Line: 75697 Error:checksum mismatch, Last Line: 76558 Error:Line Number is not Last Line Number+1, Last Line: 76558 Error:Line Number is not Last Line Number+1, Last Line: 76559 Error:checksum mismatch, Last Line: 77484 Error:Line Number is not Last Line Number+1, Last Line: 77484 Error:No Line Number with checksum, Last Line: 77484 Error:checksum mismatch, Last Line: 78397 Error:Line Number is not Last Line Number+1, Last Line: 78397 Error:checksum mismatch, Last Line: 79239 Error:Line Number is not Last Line Number+1, Last Line: 79239 Error:Line Number is not Last Line Number+1, Last Line: 79240 Usually the print finishes alright, no problems. but sometime IT'S STUCK somewhere in the middle stating the ERROR about LINES. Any ideas please?

YES, CONFIRMED! Already removed my cam software and disabled it in Device Managed, Daid, please comment, is that a bug?

Update, now the same happens to me when I printed multiple objects. Upon lifting up Z axis for next object in queue, the first layer of the new object was print at 60 mm/sec, definititely not 20 mm/sec. thanks

Please check this: 1) set cutoff object bottom any value - I set 14 mm 2) bottom layer speed is set to 20 by default 3) print speed was 60 for me When I started PRINT, Cura ignore 20 setting and printed 1st layer of cut object with 60 speed. I think it's a bug, 1st layer is the one that touched the platform first, correct? Should be 20 mm speed. Thank you. Hope this will be corrected. Thanks!