matthijsg

Ah, it's working. I noticed, that when you switch from 'full settings' to 'quickprint' the skirt will be added. Switching back, the Skirt is still on 0, but the Layer-mode shows a skirt. Is this is a bug? Also, why is the model showing green when the skirt is off the bed?

Ah, thanks for the answer! I was waiting for a reply, didn't look here :wink: Now i've to lookup what a skirt is & how to alter it in Cura .. ;-)

I can't print smaller, it has to be 19.5 cm .. @illiuminati i just mailed you

The object is green in Cura, so i 'consider' it's between the lines. Ultimaker can print 20.5 or 21. And, the bed drops before printing.

Hi all, I 've encountered a strange problem. Printing goes well, except with one STL. The size is 19.5cm*19.5cm and 5mm high. When Cura 13.06.4 sends the code to the printer and Ultimaker starts to print, the bed drops ~ 1,5cm. After that, the printing starts :mad: It's confusing me, couldn't find a solution or a fix. What's wrong here? Screenshot https://dl.dropboxusercontent.com/u/77853008/IMAG0246.jpg STL-file https://dl.dropboxusercontent.com/u/77853008/2013-07-25-omtrekkopie.stl