Jump to content

max1424

Dormant
  • Content Count

    40
  • Joined

  • Last visited

    Never

Community Reputation

0 Neutral
  1. C'est le site d'Ultimaker, j'étais pas bon en géo mais ils sont Néerlandais et donc de l'E.U. Il ne me semble pas avoir eu de soucis avec la Douane en tout cas.
  2. https://www.ultimaker.com/products/ultimaker-original
  3. Fournisseur : filimprimante3d.fr Marque du filament : 3DPremium Matière : PLA Couleur : naturelle Température utilisé pour l'impression : 207C Adhérence au plateau : trés Bonne sur blue tape. Stringling : presque aucun Bouchons : aucun Remarques : Très bonnes finitions à 0.1 sur UM Original. Surpris par la qualité, l'emballage (Bobine de bonne taille pour UM Original) et le prix. Merci filimprimante3d ! Prix : 19,90€ Livraison : 5,90€ (jusqu'à 5bobines, au delà port gratuit)
  4. Super Hugo, j'essai ça et je te fait un retour
  5. PROBLEM SOLVED ! I erased cura's old and recent profils and everything is good top infill are normal now. Thanks for your help illuminarti
  6. So i did some test and one give me good result. With Cura 13.10 and not Cura 13.12 i tried to print with the same setting i'm using for the other test and i had a better result not perfect but much better. So i tried with "quick print" in "High quality print" and tada no more gaps !! Perfect top. I'm gonna do one more test and after that post my settings. Sounds good huh !!
  7. I tired with the fan off not difference. I'm editing the time laps now. If i send you my Gcode can you try it, just to be sure it's coming from the printer and not anything else ?? I'm trying to isolate the problem.
  8. So i tried : -printing first layer at 0.1 layer height, just to check if the first layer is good because it's 0.2 layer height : first layer stay the same ! -printing the first layer at 50mm/s, for the same reasons and same result. So if i apply the same parameter to the print i still have this problem. For the bottom/top thickness i'm at 0.6, i'll try 0.8. I adjust the belts and try with a flow up to 210 and temp 215C it's a little better but not that good. I didn't try without fan, what would be the problem ? Blowing to hard on the first layer after infill ? I'm doing a time laps right now, so you will see
  9. No i'm not changing filament diameter, i measured it and they have the same and very constant diameter. I'm doing some tests right now. So far i tried on the same print 210C and 215C at 50mm/s but it's not changing anything so on the second one i tried to reduce speed at 50% and temp at 220C but not better. I'm gonna try flow adjustment and to tight belts. I realy dont understand how the problem can occur because if the bottom layers are mostly ok but just after the infill it's going crazy. I can do what ever i want nothing change it's like the UM is making fun of me !
  10. Thanks for the info. So yesterday i did a lot of test on a little print. At the same temp (210C) and same speed (50mm/s) with colorfabb and Faberdashery PLA but the results are totally random ! I upgrade to direct drive weeks ago and since i had perfect or nearly perfect top and bottom. I think i changed nothing since but it's like Cura detect when it's time to build the top and do what you can see in the picture. I've other problems on my prints but this one is driving me crazy…illuminarti big thanks for your answers !!
  11. 0235 Did you find the source of the problem ?
  12. Hi guys, Is there someone who can tell me what this error log in the "term" tab means : First print : Y 1 echo:Unknown command: "" echo:Active Extruder: 0 Error:No Line Number with checksum, Last Line: 15 Error:No Line Number with checksum, Last Line: 67 Error:No Line Number with checksum, Last Line: 185 Error:No Line Number with checksum, Last Line: 412 Error:No Line Number with checksum, Last Line: 886 Error:No Line Number with checksum, Last Line: 1353 Error:No Line Number with checksum, Last Line: 1487 Error:No Line Number with checksum, Last Line: 1871 Error:No Line Number with checksum, Last Line: 2119 Error:No Line Number with checksum, Last Line: 2185 Error:No Line Number with checksum, Last Line: 2707 echo:enqueing "M600" Second print : RY 1 echo:Unknown command: "" echo:Active Extruder: 0 Error:No Line Number with checksum, Last Line: 48 echo:Active Extruder: 0 Error:No Checksum with line number, Last Line: 16 Error:No Line Number with checksum, Last Line: 16 Error:No Line Number with checksum, Last Line: 564 Error:No Line Number with checksum, Last Line: 640 Error:No Line Number with checksum, Last Line: 720 Error:No Line Number with checksum, Last Line: 810 Error:No Line Number with checksum, Last Line: 1197 Error:No Line Number with checksum, Last Line: 1353 Error:No Line Number with checksum, Last Line: 1516 Error:No Line Number with checksum, Last Line: 1665 I've some strange "under extrusion" on my top layers. I've a good bottom at 35mm/s 210C and just after the infill all the layers look under extruded. Any ideas ?
  13. I used your link in the other post and it's working but i can't get it right with github.
  14. Thanks, how can i put the code lines in the cura/plugins ? I can't find a file to download.
  15. Hi guys, I've a stupid question, where can i find the plugins for Cura and how i instal them on a Mac version ? I did read the Ultimaker wiki but didn't find my answer. Thanks and Happy new year.
×
×
  • Create New...

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!