fjulian79

Hi .. I have equipped my UMO (+HBK) with an v6 Hot-end according to this Description and found a mistake in the original description. There is written hat a 4.7Ohm restore shall be used, but you have to use a 4,7K resistor! Add-on: I have bought Extrudr Greentec Pro filament to print a mount based on amadee's design as this should be an easy filament with good thermal resistance. But be aware, if the fitting of the hotted is to tight the plastic parts break because of the internal tension. Finally I made it print one's who survived until now, but it was not a easy task. br J.

Update, 5 more Minutes on google have lead me to this page: https://bultimaker.bulles.eu Some Clicks later my Ultimaker was back in action ... at least the display is working again ;-D br J.

Well .. same problem here! My Ultimaker is quite old .. I have not updated the firmware for a long time. Today I tried Octoprint and noticed that the Temperatures in live view are not updated correctly .. On the serial console I saw that the Ultimaker is always sending 21°C so thought that a firmware update will most likely fix this problem .. yea .. great .. what a marvelous idea :-( Please take care of users with your early models .. In your early days you have sold us those kits with the DIY Spirit and I think you made good money with us ;-) Maybe selecting the firmware to load in Cura might be a good option.