[Finding Smaller Diameter Nozzles]

I have bought some putty for car-muffler mounting. It hardens at around 180°C and has a ceramic structure when hardened. It also withstands 300°C and more very easy. I applied it to the thread with a Q-tip (very very little). It is totally tight and there are no leakages whatsoever! And the stuff is very cheap. It costs around 8CHF (6 EUR) per package and I could seal approximately 1000 Ultimakers with it

brgds

 

[Optimal Setting UM1 for high detail prints]

Thanks for the tips guys!!!

Could I ask one of you to mybe send me a cura mashine setting file? I experimented a lot with the top/bottom layer settings and so on. It would be really good to have something to compare with. I get quite good results out actually but I thin I haven't found the right receipe yet -.- I mean it even prints pretty awesome with the factory settings (high/medium/low) so I am satisfied. But I would like to max it out

Any volunteers?

 

[Optimal Setting UM1 for high detail prints]

Hello Ultimakers,

first of all thank you for all the really helpful topics and descriptions in the forum. It helped a lot!!

I was wondering, after experimenting with different options and settings (got some nice prints out) if you guys have a recommendation for setting up HQ prints?

I am building a small homecockpit at the moment and need some fine instruments

Thanks for all inputs!

Greetings from Switzerland