Jump to content

lextor

Dormant
  • Posts

    22
  • Joined

  • Last visited

    Never

Everything posted by lextor

  1. http://www.3ders.org/articles/20131215-3d-printing-and-product-liability-you-may-not-be-protected-under-current-liability-law.html what do you think??
  2. Ok i have change arduino 2560 and now finaly my ultimaker print and this is a good thing. Thank you very much for the support,but after open a ticket no responce from ultimaker..... Now i can continue my research of perfection and the way is too long!!!!!
  3. Thank you..... now i try this,i'm from Italy,i will upgrade my profile. exist acrilic frame ultimaker? Where can i buy? Thank you very much you are more faster respect ultimaker ticket.
  4. I have a problem with the ultimaker for this reason i can't print and try your suggestion.... cura say always "failed to establish connection with the printer" i have 3 computer and say the same things.... driver arduino installed few times.... i have change the cable but the same problem.... i think is dead the motherboard....he turn on, the led up the extruder is on but problem with connection...... 1 month of life...... now i buy another one motherboard???
  5. http://imageshack.com/a/img593/2675/0v97.jpg http://imageshack.com/a/img547/2857/gzd9.jpg http://imageshack.com/a/img802/7825/08wk.jpg settings: http://imageshack.com/a/img132/7940/e9b1.jpg http://imageshack.com/a/img197/3371/zrvy.jpg more of 10 times to print this.... thank you
  6. http://www.thingiverse.com/thing:7048/#files for example i have try with this a lot....no succes
  7. What type of setup you use to create a bracelet??? no possible for me....
  8. you have reason 100%......for me now is there a wrong message to clients.....the business of 3 printer increase day by day,a lot of company enter in this sector because is there a great interesting because 5 years ago was impossible to print a toy or other object at home now is possible. But i want to say to send the right message to clients,buy 3d printer take the right time to build your object and with time and experience you will have great results,but not buy download and no problem easy to print is not correct i think. my personal opinion..
  9. yes i read this in some post and now i want your personal opinion... Last november i was going to London to 3d printing show i have see for first time the 3d printer in action,a lot of stand with different company. I talked with some sellers and say to me the same things...is easy buy my 3d printer,download the sample stl and print all you desire... But here i have the confirm that each sample need a different setup and i ask to you is a right marketing??? I want to mean is not the realy situation... I learn only here good words and suggest,now i know perfectly with a help of members with a lot of experience can i take know how for a perfect printing. i can wrong but 3d printer is not a television buy and watch and is the type of message that some company have sended to me.... what do you think???
  10. now i understand.....in stand ultimaker in London,colorfabb the printing was perfect but have the secret.....)) now i trying with shell thickness 1.2 and after i show the results... thank you very much i want to use this affordable technology to change carbon parts with abs,now i try with pla and after i change with abs more stronger....
  11. Ok but i want to know if example i download other samples,each samples need different setup or not?? i want to know if is there something wrong in my ultimaker setup or is only a problem to know better which sample i want to print...
  12. 3) "Bottom" Those are the easy fixes. Here is the hard one: I can see the tape marks in your print - the wrinkles in tape. To fix the bottom I recommend getting some glass from your local glass store - spend the $5 or so to get a cut piece that fits nicely on your bed but doesn't interfere with the leveling screws. Get a thick piece if you can (5mm). Be very careful when you home the bed not to break the glass! Because the new home position will have moved - a lot! Also buy a glue stick from an office supply store. Coat the glass with some glue stick before you print. Use a damp cloth to spread the glue stick evenly and thinly and wait for it to dry. Print the first layer at 240C and then switch back to whatever temp you printed this at after first layer is done. Consider pre-heating the glass just a little - 30C is good with a hair dryer if the glue stick isn't enough. Clamp the glass to the bed with large "paper clips". The kind that can clamp 80 pages of paper. pictures??? i need to see what do you mean i have buy ultimaker I because i have see this great 3d printer in action in London last november...but i don't have the same results every type of upgrade i want to do,no problem thank you another time for your support
  13. What do you think??? is not a great print....a lot of mistake..... http://imageshack.com/a/img31/8714/3jec.jpg http://imageshack.com/a/img571/4571/zqp3.jpg http://imageshack.com/a/img823/4121/z5gz.jpg http://imageshack.com/a/img853/640/cn8o.jpg http://imageshack.com/a/img138/5526/n9hg.jpg How can i do better?? http://www.thingiverse.com/thing:99643 example give to me a suggest about setting to print this sample i copy and try thank you for your support...
  14. i try immediately..... I don't have any type of experience i download and print because i think ultimaker can do all...not always thank you very much!!! Daniele twitter @lextor199
  15. this is the results...great i can say http://postimg.org/image/7x7vj74br/ i have use this setup with cura http://postimg.org/image/tydc4eeeh/
  16. i can't put immage for this: You are not allowed to use that image extension on this community. sorry how can i put the immage???
  17. Hi, i have a ultimaker I,i have try few time to print a simply cover of my samsung s4 but impossible to do a lot of mistake during the printing. I use pla,190° degree print speed 50 mm/s,layer 0,06,shell 0.8,fill density 20%,thikness 0.6 and platform brim. I have calibrate few time the bed,the pulls and other parts,oiled and i have calibrate at my max but nothing (spring 11mm). I have the same problem with other fugure and in cura i see always a lot of error type:Error:No Line Number with checksum, Last Line: 35293 Some printing not bad but others no possible to print... only 2 weeks that i have this great 3d printer but now no idea to fix the problem.... Suggest???? thank to everyone can help me.....sure is there some hard mistakes but find it not easy.... Daniele
  18. thank you for your info,in cura term a lot of this type of eror during the printing :Error:No Line Number with checksum why? for the reason that you have descrived in your reply? thank you for the support
  19. Hi ultimate members,my name is Daniele and i'm team manager of Fast Wheels the team of 4 time world champion supermoto Adrien Chareyre. I have buyed ultimaker original kit a week ago,because the team produce a limit Chareyre replica for aprilia fan in the world and my goal is to create new airbox not in carbon but using a 3d printer. With this the bike will be more cheaper for the future clients the carbon airbox is very expensive,but after 1 week the quality of 3d printing is very bad to beginning the project. I have read a lot of post here about adjust and calibrate the 3d printer,but i need a help to fix my problem. Thank you and the 3d printing is the future,if i finish the project i share free for all aprilia members and why not i can open a little way for other's Daniele
  20. Ciao a tutti,io ho da poco acquistato la original ultimaker in kit,assemblata senza problemi piano tarato fatto il solito test del foglio di carta che passa sui 4 angoli del piano.Morale stampa male ......error checksum,perde le line,unknow command e altri errori. Ho ultima versione di cura come voi presumo,fatto aggiornamento firmware ma dopo 1 settimana non riesco a risolvere i problemi.... Ho letto diversi post,ho visto che alcune persone hanno fatto la misurazione della percorrenza del filo e altri esperimenti del genere... Suggerimenti??? Ho fatto diversi esperimenti di stampa su ppl da 220 a 210 gradi e viceversa da 220 a 230,cambiato diversi settaggi ma niente nessun miglioramento. Ho letto che mettere a "toocare ugello" a 1mm dal piano schiaccia troppo il filo fuso,se lo alzo faccio peggio,stampare una cover e' impossibile per me.... Grazie ddei vostri eventuali suggerimenti.... Daniele Ancona
×
×
  • Create New...