Jump to content

fablab-regensburg

Dormant
  • Content Count

    8
  • Joined

  • Last visited

    Never

Everything posted by fablab-regensburg

  1. Problem solved. Bending with strength was the key. Thanks for the help. I love the Ultimaker forum :-P
  2. I re-newed the Ultimaker 2 nozzle. Now my problems with filaments are gone and my print-outs are looking good again. When I changed the nozzle I had to move the extruder in the middle by hand. I didn´t need any power to move the extruder. But now I have an issue when the extruder is doing homing and the box is harmed a little at all because of scratches of the stuttering extruder. I made two short videos: https://www.dropbox.com/s/23dys84248ii0tn/UM2-Homing-Issue1.MP4 https://www.dropbox.com/s/96q2p5y419ny6di/UM2-Homing-Issue2.MP4 Important is the noise when extruder is going home. Does anyone have any idea what to do?
  3. I solved the problem and changed the nozzle. Please find PDF with instructions here: http://www.fablab-regensburg.de/wp-content/uploads/2014/04/Ultimaker-2-Nozzle.pdf Hope this helps. If you need more pictures or videos please ask
  4. Usually I print only PLA, but with the filament issues in the past I tried also ABS. I use standard ABS settings. Two different white filaments (one Ultimaker original) Cleaned the glass plate and used different types of glue sticks and kapton tape. Raft and Brim. Bigger and smaller prints. But always warp and no adhension. Any other suggestions or tipps?
  5. I have my UM2 since end of November and I printed a lot with it in the last months. But now UM2 drives my crazy. My nozzle is clogged all the time and I can´t really use my UM2 for printing. a) I feed filament with "Change material". Filament flows through nozzle. Everything looks fine. After one minute filament flow I try to start printing. And nothing.... b) "Change material" again. Filament stucks and I can hear the famous CLICK-CLACK sound of the material feeder in the back. I help the feeder motor and pull the filament by myself. And then I can see the clog. Now back to a) and then Issue b) and a) and b).... Even in my dreams I change filament of the UM2. It becomes a nightmare. I changed and tried several filaments. Four original Ultimaker PLA filaments (gold, green, dark-blue and grey) One original Ultimaker ABS white One white innofil filament. I cleaned the nozzle with the known procedures like http://umforum.ultimaker.com/index.php?/topic/4118-blocked-nozzle/?p=33691 or http://umforum.ultimaker.com/index.php?/topic/3749-clogged-um2/ Maybe the community could help? I am really frustrated. I love the print quality of the UM2, but the filament handling drives my crazy. I have a new nozzle from Ultimaker in front of me, but It looks like rocket-science to me to change the nozzle. Could someone please tell me how to change it? Pictures would be great.
  6. According to the tipps in the Forum I made a english step-by-step tutorial how to unblock a blocked Ultimaker 2 nozzle. http://www.fablab-regensburg.de/wp-content/uploads/2013/12/Ultimaker-2-Nozzle.pdf
  7. Thanks for your post. We plan to produce some more videos with our Ultimaker 2 experience. Please check out our homepage www.fablab-regensburg.de for more news. moderator edit: Note that I almost didn't approve this post [i am gr5]. But there is indeed a video showing the ultimaker2. It's the first video.
×
×
  • Create New...

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!