Jump to content

benkly

Dormant
  • Posts

    12
  • Joined

  • Last visited

    Never

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

benkly's Achievements

0

Reputation

  1. (für deutsch bitte herunterscrollen) Hello to all, I want to sell my near 3 month old assembled UM1. It runs fine and I did printed some nice feets for it and a new fan duct. I thought it would be easier to get into the world of 3D printing and I wanted it for production purposes. But I had to learn that it is not that easy to self create things and print them, or better explained, I don't have the time for that. So at the moment it stays since middle januar on the table and I didn't use it, and I think I will not use it in the next half year. Because of that I think it would be better if someone have it who really uses this printer. To the facts and what I will offer: 1x assembled UM1, buyed in late december 2013 1x PLA - silver-grey - used (I think there is still min. 75% on the roll) 1x PLA - silver-grey - new and still in the package it arrived 1x PLA - orange - new and still in bag 1x PLA - transparent - new and still in bag 1x PLA - gold - new and still in the package it arrived 1x PLA - yellow - new and still in the package it arrived 1x PLA - flexible-white - new and still in the package it arrived 1x Blue Tape - used (I think there is still min. 75% on the roll) 1x Blue Tape - new and still in bag I have a lot of screws, nuts and other things here that I give to the new owner for free. For the price I thought about 1300,-€ exkl. VAT. But I am free for your offer. At the moment, I will only sell for self-collector. I am affraid it would break if I send it as package. Everyone can come to me and look at it before buying. If you have any questions please ask me here or per PM. I live in germany near stuttgart (30km to the Ulm direction). Regards, Benny. ------------------------------------------------------------------------------------------------------- Hallo an Alle, ich möchte meinen knapp 3 Monate jungen aufgebauten UM1 verkaufen. Er läuft gut und ich habe ein paar kleine Verbesserungen daran gemacht (Füße mit Gummidämpfung, Lüftergehäuse, X/Y-Motor Spanner (die sind nur gedruckt aber noch nicht montiert). Ich habe mir das ganze mit dem 3D-Drucken und selbst Entwickeln ein wenig einfacher vorgestellt als es tatsächlich ist. Ich wollte damit Gehäuseprototypen in Kleinst- bzw. Vorserie herstellen aber ich habe gemerkt das es doch nicht so einfach ist die 3D Modelle dazu zu erstellen und es mich einfach zu viel Zeit kostet. Daher steht dieser Drucker auch schon seit Mitte Januar auf dem Tisch rum und tut nichts. Eigentlich zu schade dafür und da ich nicht glaube das sich dies dieses Jahr ändert, gebe ich den lieber an jemanden ab der den auch benutzt. Aber nun zu den Fakten und was ich anbiete: 1x aufgebauten UM1, gekauft Ende Dezember 2013 1x PLA - silber-grau - benutzt (auf der Rolle dürften noch gute 75% drauf sein) 1x PLA - silber-grau - neu und immer noch im Karton in dem es geliefert wurde 1x PLA - orange - neu und immer noch ein der Folie 1x PLA - transparent - neu und immer noch ein der Folie 1x PLA - gold - neu und immer noch im Karton in dem es geliefert wurde 1x PLA - yellow - neu und immer noch im Karton in dem es geliefert wurde 1x PLA - flexible-white - neu und immer noch im Karton in dem es geliefert wurde 1x Blue Tape - benutzt (auf der Rolle dürften noch gute 75% drauf sein) 1x Blue Tape - neu und immer noch ein der Folie Durch mein Gewerbe habe ich noch genügend Schrauben, Mutter usw. für den Drucker und das gebe ich dann gratis mit, daran sollte es nie fehlen ;-) Was den Preis angeht, da habe ich an VHB 1300,-€ Netto gedacht. Aktuell traue ich mich nicht den Drucker zu versenden, ich bin mir da nicht sicher ob der das übersteht bzw. ob ich den gut genug verpacken könnte. Daher bitte vorerst nur an Selbstabholer oder gegen entsprechende Bezahlung liefer ich den auch mit dem Auto oder fahr einem entgegen. Nur versenden will ich den nicht. Natürlich kann sich jeder für eine Besichtigung anmelden. Auf Bilder habe ich vorerst verzichtet, ich denke wir hier wissen wie ein UM1 aussieht ;-) Wenn es Fragen gibt, dann einfach hier schreiben oder per PN. Ich wohne in Deutschland in der Nähe von Stuttgart (30km Richtung Ulm). Gruß, Benny.
  2. For me thats easy. Before the Win 8.1 update all worked fine, also the 3D printer. After the update it does not work anymore. So the only thing I changed was from win 8 to win 8.1 and you will tell me it has nothing to do with that, ok...... But lets starting troubleshooting. I did the win 8.1 update without the printer connected to the PC. All went fine, some reboots and so on. 1. Few days later I wanted to print something and connected the printer by USB. The normal win sound for USB was there and win wanted to search and install a new driver -> first strange thing but ok since I did the win 8.1 update so I didn't worry about that. 2. But then win could not install the driver. It said that the device couldn't be installed because there was no or bad driver and the device manager shows a unknown device. 3. First thing I try was to install the driver by hand and point windows to the cura/driver dir to use that driver. It started to install the driver, but with same result. The driver for arduino something could not be installed. 4. Then I looked at the ultimaker homepage and searched for an update and downloaded the actual cura version. Again try to install the driver by hand and point to the new cura/driver dir. Win try to install but with the same problem, driver could not be installed. 5. Then I started to search the web or better this forum and see this thread and the post from the developer that said that the ultimaker printer do not work with win8 or win8.1. Since then I did nothing else and don't know what should I do.
  3. Win 8 x64 is working fine for me. But since my Win 8 updated to Win 8.1 the printer don't work anymore. Why the hell don't you thell this on your homepage? You tell all other stuff about your printers and even that it works on the windows operating system. But it doesn't, and I have the actual windows operating system thats on the market at the moment, and it doesn't work. Thats a real shame. I think we don't write here about a 50$ dynmo printer and if your printer does not work on any version of the windows operating systems, then you should write that in bold red letters on your homepage!
  4. benkly

    Bauanleitung?

    Hört sich vielleicht bescheuert an, aber denk bei Motoren anklemmen daran den Extruder Motor nicht mit dem X-Motor zu verwechseln. Das merkt die Software beim Hardwaretest nicht und die beiden verwechselt man leicht ;-)
  5. Hi, so, habe heute morgen dann wieder ewig versucht die ersten Layer an Bett zu bekommen. Ok, um es danach leiter ablösen zu können, habe ich es mal mit Silikon Spray probiert, auf Tuch gesprüht und das blaue Tape leicht eingerieben....nur falls jemand mal auf die gleiche Idee kommen sollte -> WAR EINE SCHEISS IDEE!!! Hab das Tape entfernt, alles mit Spiritus gesäubert und neues Tape aufgezogen. Jetzt ging es erstmal wieder und ich habe meine 4 Füße für den UM1 :-P Wie war das nochmal mit dem Trick mit dem Klebestift. Davon habe ich heute mal ein paar besorgt, so UHU Klebestifte. Geht es dann danach besser weg? Und was hat es mit diesen "Platform adhesion type" Optionen auf sich, klar, das was da in englisch steht verstehe ich schon, aber was ist da sinnvoll, auch in Bezug auf Ablösbarkeit. Ich habe bei 2 Füßen dieses "Brim" versucht, dann sollen die Ecken nicht so hoch stehen. Tststs, von wegen, die stehen bei den 2 Füßen mit "Brim" genauso hoch wie bei den 2 Füßen wo diese Option auf "none" stand. Jetzt mal nen gescheiten Lüfterhalter raussuchen. Wäre es eigentlich auch denkbar von aussen, also Links und Rechts, in den Printer mit Lüftern zu blasen? Dann müssten die nicht immer mit dem Kopf mit wandern.... Was gibt es sonst noch an sinnvollen Ergänzungen? Ich habe da so eine Adaptierung gesehen mit der man die beiden X/Y-Motoren besser spannen kann. Ist das gut? Gruß, Benny.
  6. Hallo, ich drucke aktuell diese Füße für den Ultimaker... http://www.thingiverse.com/thing:55790/#files ...und habe aktuell beim 2. Fuß das Problem das es nicht so richtig starten will. Der fängt an die 1. Fläche zu drucken und beim größeren Bereich gibt es dann sowas wie Blasen und es reisst ein riesen Loch rein. Sieht so aus als ob es noch nicht so richtig fest wäre und daher weich und daher reisst es auf. Komischer weise läuft der Lüfter am Kopf beim 1. Layer nicht :-( Jetzt habe ich es aktuell mal wieder hinbekommen das er bis zum 2. Layer kommt und dann setzt der Lüfter ein, ich denke wenn der von Anfang an mitlaufen würde dann würde es passen. Aktuell drucke ich mit: Layerdicke: 0,15mm Fill Density: 30% Speed: 50mm/s Temp: 220°C Beim ersten Fuß hat es aber mit den Werten Funktioniert: Layerdicke: 0,15mm Fill Density: 30% Speed: 45mm/s Temp: 230°C Warum gehts beim 2. mal nimmer? Gibt es sinnvolle Werte zum beginnen? Und was kann man vor dem Drucken machen damit man danach sein Teil vom Bett bekommt ohne das halbe Bett abzureissen? Gibt es da einen guten Trick? Danke schon mal im Voraus für die Tipps! Gruß, Benny.
  7. Oh men, now I feel bad. They just didn't update the shipment status, I think because they want to just send out all the goods and don't want to waste time with order updates in the shop. Because Sander send me my tracking number and as it seems it will arrive today. Please forgive me for my childish behavior :roll:
  8. Hello Sander, thank you for your information! I saw the mail this morning and now I await eagerly the postman as my 2 year old child the christmas day :mrgreen: The only one who is now laughing about the situation is my wife. Boys and mens allways stay the same, only the toys get more expensive :grin: Have nice christmas days!
  9. Hello Sander, I ordered an UM1 as DIY kit (R260422270), since a week the status tells me "Shipment: Ready" and nothing happens. A few posts before you told that your company actually ships every day, but for now still the status "Shipment: Ready". So my question is, if the "Shipment" is "Ready" since a week and you ship daily, why is it not on its way? Is there any problem with the order? Thanks and regards, Benny.
  10. Yes, this is very annoying. I don't know why they could just say what is going on. A live ticker on the homepage that says whats going on would be fine. I got no problem if they say "hey, we catch all orders and want to ship them out all together on friday so we have more time to pack all things together since friday". But we get just no info about what will happen..... This is very sad....
  11. Hello, I did an order last friday and since this the status of the order tells the same thing: R260422270 Details Order date December 13, 2013 Order Complete Payment Paid Shipment Ready "Shipment Ready" since friday. When will it be sent out? I am afraid I got nothing to do over the christmas days :cry: Could someone help me out? Regards, Benny.
×
×
  • Create New...