Jump to content

DidierKlein

Moderator
  • Content Count

    5,693
  • Joined

  • Last visited

  • Days Won

    31

3D Print posted by DidierKlein

  1. Darwin Barcode

    Design by @lekid
     
    Inspired by a picture found on internet
     
    Printed with Polymaker Polysmooth filament and polished with the Polysher
     
    Then glued on a glass frame of 30cm x 60cm

    41 downloads

       (1 review)

    0 comments

    Updated

  2. Wolf Skull

    A wolf skull i printed to demo some vet stuff (soon to come).
    Scaled 150% and printed in Ultimaker Pearl White

    2,190 downloads

       (0 reviews)

    0 comments

    Updated

  3. Vorpal Blade in Steel Fill and Wood Fill

    So i'm lucky enough to have received a test spool of the new SteelFill from ColorFabb
    I found this cool model to print, it seems to me it's a good choice to print steel!
    Blade printed on my old Ultimaker 2 with a 0.50 steel nozzle (steelfill eats brass nozzles!) Layers of 0.1mm and speed reduced to 30mm/s, 0 infill (maybe i should have added some infill).
    Handle printed on a UM2+ with V3 block and 0.60mm nozzle in Woodfill fine

    2,761 downloads

       (0 reviews)

    0 comments

    Updated

  4. Alien egg lamp

    Printed with Ultimaker Pearl White and ICE Gnarling gree fluo
    With a prime tower, no cleanup needed
    Flawless print around 12h at 50mm/s with 0.15 layers i think (maybe 0.2mm i'm not sure anymore)

    1,541 downloads

       (0 reviews)

    0 comments

    Updated

  5. Wave vase

    This is a self designed Wave vase (designed with Fusion 360). Yes it's inspired by the wave vases you all know off but this is designed by me
    Printed in ColorFabb Dutch Orange on the Ultimaker 2 Extended, spiralize mode with 0.2mm layers and 0.6mm walls. Print time 12h, the vase is 200mm tall and 100mm wide at the widest point.

    3,752 downloads

       (0 reviews)

    0 comments

    Updated

  6. Discobolus Ultimaker 3

    Looking for a nice print that requires a lot of supports i found this awesome model on myminifactory.
    Printed with mostly default profiles for PLA and PVA (just dropped the temp to 200°c for PLA and 207°c for PVA) Speed to 50mm/s and layers of 0.15mm
    No wipe tower
    Check out the timelapse on youtube to see the PVA dissolving

    1,827 downloads

       (0 reviews)

    0 comments

    Updated

  7. Twisted Vase with Olsson Block and 1mm nozzle!

    This is a well known vase printed in Blue Lagoon from Faberdashery (very nice).
    It's printed with my Ultimaker 2 modified with the Olsson Block and a 1mm nozzle from www.3dSolex.com.
    Printed in Spiralize mode with a 1mm wall, and 0.5mm layers! It's very fast, around 1h25 to print at full height (200mm).
    Watch the video!
    I'll do a complete review soon on this nozzle

    5,646 downloads

       (1 review)

    0 comments

    Updated

  8. Viking Helmet

    My newborn daughter gets relaxed when she's hearing music from the Vikings Tv Show (from History channel, if you didn't watch I highly recommend it).
    So what's better than printing her a Viking Helmet? Nothing
    It was printed with a bad spool of PLA, so it's under-extruded at some areas, and i changed the retraction settings so it's a bit stringy on the horns but who cares it's for the fun of it.
    It was printed with the awesome Olsson block with a .8mm nozzle at 0.3mm layers. Just took 6h30 to print!

    2,628 downloads

       (0 reviews)

    0 comments

    Updated

  9. Big Ultimaker Robot with the .8mm nozzle with the Olsson Block

    I printed this big UM Robot with the modified Olsson block and the .8mm nozzle.
    The silver one is the normal robot that most of us print at least once

    5,493 downloads

       (0 reviews)

    0 comments

    Updated

×
×
  • Create New...

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!