-
Posts
5,804 -
Joined
-
Last visited
-
Days Won
33
Content Type
Forums
Events
3D Prints
3D Print posted by DidierKlein
-
Alien egg lamp
By DidierKlein in 3D Prints
Printed with Ultimaker Pearl White and ICE Gnarling gree fluo
With a prime tower, no cleanup needed
Flawless print around 12h at 50mm/s with 0.15 layers i think (maybe 0.2mm i'm not sure anymore)
1,541 downloads
0 comments
Updated
-
Big Ultimaker Robot with the .8mm nozzle with the Olsson Block
By DidierKlein in 3D Prints
I printed this big UM Robot with the modified Olsson block and the .8mm nozzle.
The silver one is the normal robot that most of us print at least once
5,561 downloads
0 comments
Updated
-
Darwin Barcode
By DidierKlein in 3D Prints
Design by @lekid
Inspired by a picture found on internet
Printed with Polymaker Polysmooth filament and polished with the Polysher
Then glued on a glass frame of 30cm x 60cm
44 downloads
0 comments
Updated
-
Discobolus Ultimaker 3
By DidierKlein in 3D Prints
Looking for a nice print that requires a lot of supports i found this awesome model on myminifactory.
Printed with mostly default profiles for PLA and PVA (just dropped the temp to 200°c for PLA and 207°c for PVA) Speed to 50mm/s and layers of 0.15mm
No wipe tower
Check out the timelapse on youtube to see the PVA dissolving
1,827 downloads
0 comments
Updated
-
Twisted Vase with Olsson Block and 1mm nozzle!
By DidierKlein in 3D Prints
This is a well known vase printed in Blue Lagoon from Faberdashery (very nice).
It's printed with my Ultimaker 2 modified with the Olsson Block and a 1mm nozzle from www.3dSolex.com.
Printed in Spiralize mode with a 1mm wall, and 0.5mm layers! It's very fast, around 1h25 to print at full height (200mm).
Watch the video!
I'll do a complete review soon on this nozzle
5,722 downloads
0 comments
Updated
-
Viking Helmet
By DidierKlein in 3D Prints
My newborn daughter gets relaxed when she's hearing music from the Vikings Tv Show (from History channel, if you didn't watch I highly recommend it).
So what's better than printing her a Viking Helmet? Nothing
It was printed with a bad spool of PLA, so it's under-extruded at some areas, and i changed the retraction settings so it's a bit stringy on the horns but who cares it's for the fun of it.
It was printed with the awesome Olsson block with a .8mm nozzle at 0.3mm layers. Just took 6h30 to print!
2,633 downloads
0 comments
Updated
-
Vorpal Blade in Steel Fill and Wood Fill
By DidierKlein in 3D Prints
So i'm lucky enough to have received a test spool of the new SteelFill from ColorFabb
I found this cool model to print, it seems to me it's a good choice to print steel!
Blade printed on my old Ultimaker 2 with a 0.50 steel nozzle (steelfill eats brass nozzles!) Layers of 0.1mm and speed reduced to 30mm/s, 0 infill (maybe i should have added some infill).
Handle printed on a UM2+ with V3 block and 0.60mm nozzle in Woodfill fine
2,763 downloads
0 comments
Updated
-
Wave vase
By DidierKlein in 3D Prints
This is a self designed Wave vase (designed with Fusion 360). Yes it's inspired by the wave vases you all know off but this is designed by me
Printed in ColorFabb Dutch Orange on the Ultimaker 2 Extended, spiralize mode with 0.2mm layers and 0.6mm walls. Print time 12h, the vase is 200mm tall and 100mm wide at the widest point.
3,759 downloads
0 comments
Updated
-
Wolf Skull
By DidierKlein in 3D Prints
A wolf skull i printed to demo some vet stuff (soon to come).
Scaled 150% and printed in Ultimaker Pearl White
2,196 downloads
0 comments
Updated