-
Posts
5,804 -
Joined
-
Last visited
-
Days Won
33
Content Type
Forums
Events
3D Prints
Posts posted by DidierKlein
-
-
Merci pour le sujet je suis sure que ca va etre utile
-
Je n'ai pas encore beaucoup d'expérience vu que je n'ai pas encore mon imprimante mais y a peut etre le programme meshlab qui pourrait t'aider:
http://meshlab.sourceforge.net/
Ou alors meshmixer il me semble qu'il y a moyen aussi de réparer les stl avec des trous:
-
Nice print it looks like the town of winterfell from game of thrones
-
Dans le sujet sur le forum ils ont dit qu'ils avaient fait en sorte de ne pas impacter les livraisons a venir donc j'espère pour toi que tu ne seras pas post-poser. Je pense qu'ils ont eu du renfort au niveau de la construction des imprimantes, en tout cas ils cherchaient une personne récemment pour ce job je sais pas s'ils ont trouvé.
-
Oui ca fait environ 2 semaines qu'ils ont changé les délais de livraisons sur le site.
Je ne sais pas si vous lisez tous l'anglais mais ils ont eu un cambriolage ce weekend, 30 machines volées... d'après eux ils travaillent d'arrache pied pour ne pas pénaliser les délais de livraison.
Donc soyez également attentif si vous voyez subitement des UM2 d'occasion (ils ont les numéros de série).
Moi je patiente j'en ai encore pour minimum 6 semaines et j'ai déjà du mal ^^
-
Wow 30 Units ... they must have had a big Van to put all of this in...
I will check on the sales websites of Belgium, i hope you'll find them.
I'm really sceptical of the ways the thieves will gain profit of these very specific items it's not like a TV or Playstation that you can easily sell on the streets...
-
good morning Didier ! :smile:
I orientated the model... like im holding it with the base down... because the outside and inside surface has a nice gradula curve and i printed at .1mm, there was no stringing or sagging.. just fantastic surfaces...
really... get an ultimaker 2.. make good clean models and you cant ask for better.. the quality of my prints is just stunning...when you put the models in your hand.. they feel like professional injection molded parts... crazy good
Ian
Thanks Lan i'm very confident with my choice off the UM2 when i see all the quality prints that are shown here.
You printed with no support? Amazing quality
@Bauermaker very nice print
-
I love to see all your nice prints i can't wait to get my UM2 so i can post some of my creations too
@lan: Cool print how did you orientate the print?
-
Hi all,
Just came accross the following news:
http://www.webpronews.com/these-are-the-top-10-trending-3d-printers-of-january-2014-01
It says that there are about 2500 Ultimakers out there does anybody know if this is true?
-
Pour environ 150€ de plus tu dirais que ca les vaut de pas attendre 6 a 8 semaines?
J'ai ajouté une dans le panier ils me disent qu'elle serait la le 31 janvier ca me fait hésiter sachant que j'ai commandé la mienne chez Ultimaker le 10 Janvier
Y a la garantie de 1 an qui n'est pas négligeable aussi
-
I have always dreamed of having an Afro like the Jackson Five... it just depends on the colour you choose
-
Who has a "Hair" design to print for all of us bald guys ^^
-
Wow very nice it almost looks like a sculpture.
I thought it was painted or had some kind of post-print treatment.
-
Si tu laisses le filament a terre ça ne risque pas de "prendre" des poussières/poils ou autre avec et d'abimer l'imprimante?
-
D'apres ce que je lis sur le topic du même style en anglais les commandes sont souvent honorées dans le délais des 8 semaines donc patience patience moi j'ai plus que 7 minimum a attendre et j'ai hate
-
As I clicked on 'post' I realised that it was the type of information that is best kept secret no problem
I guess you guys must be under a lot of pressure with the delay issue it must be hard to satisfy everybody
-
I'm guessing that the lead time will decrease once you guys find the right person you seek in the jobs section
By the way i was wondering how many UM2 are you producing and sending every week?
I think that Ultimaker is a victim of it's success, a lot of patience is maybe the price to pay to have a great product?
-
Maybe you should take a look at this post:
It's in french but i think it meets your request?
-
@3dImpress non a mon avis si je la reçois avant le mois d'avril j'aurais de la chance ca va faire long a attendre.
Si ceux qui ne sont pas sur twitter veulent que je pose la question dites le moi il me faut probablement la référence de votre commande par contre
-
That's nice how do you do that i can't seem to find an upload photo feature?
-
Je suis sur Twitter si vous voulez je peux poser la question pour vous (j'imagine).
Moi je sais que je vais patienter car quand je vois les trucs que la UM2 sort je sais que c'est le bon choix
-
Visiblement il vaut mieux passer par Twitter pour avoir des infos d'après ce que j'ai lu sur d'autres sujets
-
Date de commande : le 10 Janvier 2014.
Date de réception : le 15 Janvier 2014 (ou pas, en attente aussi)
Ca fait plusieurs sujets que je lis sur le forum de gens qui se plaignent du délais et qui annulent leur commande ca fait un peu peur mais bon je pense que l'UM2 vaut le coup de patienter, par contre déjà après 5 petits jours je me réjouis a fond de l'avoir
-
Thanks gr5
After taking some advice of someone working in supplies for human surgeries I now know that the process of creating some materials that should go inside an animal (or human) takes at least 8 to 10 years to complete... so i guess I'll have the time to find the correct way to do this.
In the meanwhile i guess the offer in materials and printers should be different.
Anyway i'm still planning to buy an UM2 for other purposes that are less time-consuming in procedures for external use on animal (prothesis) or instruments for surgeries.
Thank you all for you answers this community is one of the reasons I feel confortable with my choice of Ultimaker
Split large .stl
in Design for Additive Manufacturing
Posted
This is what i found on the web:
I don't remember what software but i believe that netfabb pro isn't the only one to do this
[edit]I believe Cura is able to do this too?
Or maybe not
Maybe take a look at:
http://www.3ders.org/articles/20130111-puzzlecut-lets-you-cut-object-into-smaller-pieces-for-3d-printing.html