Jump to content

pigplastique

Dormant
  • Posts

    37
  • Joined

  • Last visited

Everything posted by pigplastique

  1. Einfach ABS in Aceton auflösen und den Brei mit Pinsel auftragen.. hält bei mir Bombenfest...
  2. Also soweit ich das als Nichtchemiker verstehe, ist es eben KEIN Aceton sondern Ethyl acetate... Aceton reagiert wenn dann nur seehr minimal auf PLA (zumindest bei meinen bisherigen Versuchen). Hatte es letztens mit ABS versucht und bin echt begeistert.. Man muss das Aceton nicht mal erhitzen, sondern einfach das gedruckte Objekt zusammen mit einem acetongetränkten Tuch in einen geschlossenen Behälter.. dauert dann halt ein paar Stunden aber man behält etwas kontrolle. Man kann das Objekt auch etwas früher aus dem behälter nehmen (vorsicht: klebrig und weich ) da es noch etwas nachreagiert. Hatte irgendein noname ABS verwendet. Ich denke das spielt keine grosse Rolle. Als nächstes wollte ich es mit "Formfutura EasyFil HIPS" versuchen, da es hoffentlich etwas einfacher zu drucken ist und wohl auch mit Aceton reagiert... Hoffe ich konnte helfen ...
  3. Congratulations also from my side ! And have some fun with the upgrade . I´m going to put money aside from now on... Hopefully my girlfriend will not realize it
  4. obviously nothing what makes me work more awesome but hopefully something what makes me work more happier ! And ofcourse, it spents some light in the evenings during extra hours in the late evenings....so it´s useful...a bit... [print=3538][/print]
  5. Version 1.0

    1,934 downloads

    this is a desk lamp I did for my office desk. I got this beutiful concept of an upcoming superhero called "IRONMOUSE" and I could not ressist to see it printed in 3D
  6. [print=3472][/print] Here is my entry to the contest... Nothing really life-changing for me but I´ve got lots of happy, fat birds in my backyard right now and a huge mess on my balcony floor
  7. Version 1.0

    1,492 downloads

    Hopefully it helped some of the birds in my backyard to survive during the winter. Or even getting fat
  8. Congratulations guys ! Great work overall. It was much fun to take place in this contest.
  9. oh, ok thanks a lot... I will try, but it´s not that easy
  10. Hey there, just wanted to ask if there are any news about the contest, or did I miss anything ?
  11. So here is what I was working on the last few weeks. I wanted to pick the character theme and bring them together with the slogan of every page. I´m not the guy who´s fluently in english, so the descriptions are a bit short.I hope the pictures speak mostly for them selves The pictures should be seen as mockups, so some details are missing in this stage and are planned for further steps. HOME: The Idea of this page was not only to show the Ultimaker together with a beaver (both are makers and build things) I also wanted to show the love into the machine.That´s why the beaver carved a heart into the trunk and by putted the printer onto a socle like in a museum or in a art-gallery. ULTIMAKER FAMILY I wanted to show the variety of pritable objects and the love into them. So the girl ist printing out all her toys but in the end she´s hugging a big ultirobot because the Ultimaker is the machine which makes all this possible. ULTIMAKER ORIGINAL This page should show the claim „ make it yours“ in a double-sense. On the one hand the dog uses the printed tolls and clapboards to rebuild it on the other hand in a home for himself. ULTIMAKER 2 A sloth is an easy-going smart animal and an Ultimaker makes his life even easier, so I thought it would be very funny to bring both together on one page. ULTIMAKER 2 EXTENDED To show the advantages of a taller buildvolume of an Ultimaker Extended and also the idea of printing ( getting things appear ), the big bear does a magicianstrick and pulls a tall bunny out of the printed magicianshat. ULTIMAKER 2 GO I wanted to show how handy the UM2 Go is, so the birds took the nest into it and fly away from the angry cat before it catches the chicks... SOFTWARE The clever turtle uses the supereasy cura to build a new shell. This demonstrates the usability and the cleverness of curausers. MATERIALS The chameleon can take on any colour, so it shows best the variety of the different materials you can print with an ultimaker. The goal is to print it in different colours and the tongue in PLA Flex I hope you like it...
  12. Here is an additional sketch to my animal-creature-work. The weasel on my first sketch has now changed into an otter sitting in front of a fish jumping out of a pond.
  13. So here are my ideas of "heroes" for the Hero Design Contest. I thought it would be fun to explore the animal-creature-theme a bit more... Each animal stands for one page. Maybe some of them will come together with small items ( the worm could sit on the mushroom, the bear could get some bees or the rabbit will have a carrot) To show how the models should look at the end, I started to sculpt the first of them. The beaver: It´s designed in several parts. So the eyes, arms and legs are movable, which makes it more flexible and interactive. I´m looking forward for some comments.
  14. Hi, also wie ich das verstehe, ist der Ultimaker+ KEIN komplett überarbeiteter Ultimaker original, sondern genau der, wobei er nun ein Heizbett samt 3-Punkt-levelling-system besitzt (Beides in meinen Augen die Kernfeatures des Ultimaker2). Ich besitzt seit knapp 2 Jahren einen auf Heizbett und 3-punkt umgerüstetetn original und bin seeeehr zufrieden. Der Vorteil ist, das durch den zusammenbau die Zurückhaltung vor eigenen Umbauten schwindet und man so die Druckqualität noch um einiges steigern kann (z.B. Direktantrieb, GT2 Zahnräder und Riemen...). Was Leider immer noch sehr stört, ist die Lautstärke, die durch die Resonanz des Holzrahmens und vorallem durch den sehr lauten elektroniklüfter (austauschbar) entsteht. Mein Fazit: Meiner meinung nach gibt sich die Qalität beider Druckern (vorallem duch Nachrüstung) nicht viel, Geschwindigkeit dürfte in etwa gleich sein mit leichtem Plus mein Ultimaker2 ( Vorsicht 300mm/s druckt wohl keiner, wenn die Qualität stimmen soll, liegt die Geschwindigkeit wohl eher bei 40-70 mm/s ) und wenn man den Drucker nicht im Wohnzimmer stehen haben will, Ist man mit dem Original+ wohl sehr gut Beraten ( oder man wartet wie ich, bis irgendwann die Nummer 3 -hoffentlich mit direct-extruder- auf den Markt kommt ) Schönen Gruss
  15. Hi Ammar, ich hatte bislang das beste Ergebnis mit dem "toolcraft Sekundenkleber" vom Conrad. Ich glaube es war dieser hier: http://www.conrad.de/ce/de/product/886547/TOOLCRAFT-Sekundenkleber-TC-SKP5G-5-g?ref=searchDetail Ist für kurze Zeit repositionierbar und hält super! Schönen Gruss und Viel Spass bei deinem Projekt flo
  16. just by hand with an ironsaw. But after I had to drawfile the edges a bit. The rod seems to be slightly to thick an the beginning ( was a bit hard to get it through the bearings ) but after oiling it and moving the printhead a few times around, it worked really fine... I did the mod nearly one year ago and I never regreted it !
  17. Hi Mischiminator, I used this one http://www.conrad.de/ce/de/product/237205/Silberstahl-Welle-500-mm-8-mm?queryFromSuggest=true.%20Worked%20well%20for%20me%20and%20not%20really%20expensive.. You might only need one, because you could use the longer one from the printer for the other axis.
  18. Hi maggiman, In cura 14.07 findest du unter "advanced" die "initial layer thickness". Wenn deine Plattform gut eingestellt ist, kannst du den Wert heruntersetzen. Auch könnest du theoretisch bei "Initial layer line with" ein paar Prozente runtergehen.. Kann dann aber passieren, dass dein Objekt nicht mehr so gut haftet.. Würde es vorsichtshalber erstmal an kleineren Objekten testen. Gruss flo
  19. Hey, ich denke es wird wohl under-extrusion sein. ist mehr oder weniger das häufigste problem...hast du dir das hier schonmal angesehen: http://support.3dverkstan.se/article/23-a-visual-ultimaker-troubleshooting-guide hier ist alles ziemlich genau beschrieben... ansonsten wären genauere angaben zu temperatur, geschwindigkeit, etc. sehr hilfreich... schöne grüsse, flo
  20. Ich kann da nur GLOWBUG-YELLOW von Faberdashery empfehlen... Wa bislang das beste Material überhaupt... Ich drucke mitlerweile fast alles mit dem Zeug. ist zwar ein bisschen teurer als die anderen Materialien aber es lohnt sich wirklich... Schönen Gruss
  21. Hi, Ich denke dass deine Düse leicht verstopft ist. Hast du schonmal versucht, mit einer sehr feinen Nadel vorsichtig die Düse zu säubern ? Hat bei meinem Ultimaker1 schon mehrfach funktioniert... Schönen Gruss
  22. at the weekend I printed out some gifts for my nice to pimp up her bedroom... hopefully she will like it and have nice dreams.. I used glowbug yellow form faberdashery ( I really love it ) and also did a small time-lapse video with all printing settings in it
  23. Direktantrieb bedeutet, dass die Motoren direkt mittels Wellenkupplung ( z.B.http://fabber-parts.de/shop/index.php?a=143)%20mit%20den%20Achsen%20verbunden%20werden.%20Somit%20fallen%20die%20kurzen%20Zahnriemen%20weg., mit den Achsen verbunden werden. Somit fallen die kurzen Zahnriemen weg., Siehe hier: http://www.calumdouglas.ch/3d-printing/ultimaker-3d-printer/direct-drive-upgrade/ Wenn die Gleitlager schlecht laufen,würde ich mal schauen,ob die Achsen verbogen sind... Etwas Öl könnte auch helfen.
  24. Hi Eddie, das Problem mit den Rundungen und der Schwergängigkeit der Achsen kommt sehr wahrscheinlich daher, dass deine Riehmen nicht richtig gespannt sind,bzw,deine Achsen nicht 100%ig rechtwinklig zu einander ausgerichtet sind. Du solltest deine Zahnräder nochmal lösen,Zahnriemenspanner https://www.youmagine.com/designs/microwave einsetzen, die Achsen mit diesem Tool http://www.thingiverse.com/thing:81415%20ausrichten%20und%20alles%20wieder%20festziehen. ausrichten und alles wieder festziehen. Auch solltest du die kurzen Zahnriemen an den Motoren auf Spannung überprüfen. Hoffe das hilft erstmal. Gruss flo
×
×
  • Create New...