claudiunyc
-
Posts
11 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by claudiunyc
-
-
Thanks.
I understand. I can't make the part with suport because the face must be smooth. So I will split in two and put some glue.
Keep in touch.
-
Hello,
I'm trying to print something with suport but after I remove the suport the face isn't smooth.
What can I do to solve this problem.
Thanks
-
Thanks
Great job.
I will try next days to print as you said.
Keep in touch
-
You are right it's very tiny. I tried at 20 mm/s, 0.1 layer with 80% fans but it wouldn't work.
I quit it's not worth.
Thanks
-
Thanks. Very useful but still can't print that part.
-
Hello,
I'm trying to print a small part as it is in the picture:
http://www.mediafire.com/view/zv3u3vmgecg9nde/python.JPG
Here is the g-code: http://www.mediafire.com/view/ejecbsx389wn82v/racheta_pyton_2.2.gcode
What settings I must use for such a small part?
Keep in touch.
-
Hello again,
I have a part: https://www.mediafire.com/?zv3u3vmgecg9nde which is small as you can see in the picture.
I don't know what settings I must use. The part is little (diameter of 2.2 mm)
-
I will try. Tranks.
-
First of all, I would like to thanks for your prompt help.
I install Cura14.02 and after I print the part everything was change.
The settings were: 0.1 layer, 50mm/s, 210 oC, retraction length 5,5, retraction speed 25 mm/s and I disable combing and at z hop I put 0.1.
The part has no scratch as you can see in the attach picture.
https://www.mediafire.com/?pimnkqq2dt0kdz4
I think if I set up the speed at 30 mm/s the quality will increase more than at 50 mm/s.
What do you know about the quality of the first layer? How can I improve the quality of the top of the part?
Have a good night! Keep in touch.
-
Hello,
I'm having a problem with some parts printed on my UM 2.
At the top of the part apear some scratches. What settings I must to make to dissapear? Anyone have met this problem?
The printing settings were 0.1 layer, 30 mm/s speed, retraction length 5.5 and retraction speed 35 mm/s (I read in some posts about these settings)
I attach some pictures:
http://www.mediafire.com/view/ryi7azahgrywbef/scratch.jpg
http://www.mediafire.com/view/ccxbybwuxbu5hmx/scratch1.jpg
Looking for some advices!
print with suport
in Coffee corner
Posted
Thanks Iluminarti. I will take into account.
Here is the part I was talking about: https://www.mediafire.com/?9wrg7o69ldf4t2r