Jump to content

dirkels

Dormant
  • Posts

    113
  • Joined

  • Last visited

    Never

Everything posted by dirkels

  1. If I click on '#' link it brings me to a page with a big red box that says: Oops! Excuse me The resource / page / 3D object you requested does not exist.... bla bla bla. Tried again with same result, made me lose interest, sorry. Btw: the 'report a problem' is so far below bottom of page that I doubt it will get much use (tested in chromium and firefox on ubuntu).
  2. To bad the GoPro template can't be downloaded :sad:
  3. Zal je net zien net toen ik op het punt stond te vertrekken sloeg een geniepig virusje toe. Ben weer op de been maar baal deze avond gemist te hebben. Maar goed ik zie dat de ervaring hier al aardig gedeeld worden, top :-)
  4. I secong this request as I like to use my monitor in portret mode.
  5. Finally a weekend at home again which also means I will be around to attend this Ulti-Evening :-)
  6. Zou graag langs komen maar zit voor werk tot 5 a 6 uur opgesloten in een Ford fabriek in Duitsland :-(
  7. Well when bitching about errors, I'm missing the <rant> tag ;-) Other than that I agree.
  8. In album you can see the 9 different parts I used. All colors except white are a single 0.2mm layer. The white one has two 0.3mm layers, you can use more but with two the back is still flexible. As you can see the colored ones have a small border the same outer dimension as white piece making them align perfectly, as long as you don't accidentally move them. In between prints remove the alignment border and skirt when on, skirt is not really needed as the alignment border is basically a skirt. If you need to keep the bed warm depends on what build service you use, with the one I use I could let the first 5 colors sit overnight on a cold platform without them getting loose, needed to wait for the final cyan color to arrive.
  9. Well, just found out I'm on a German tour for work the next month so will not have much time during that period anyway, hopefully your more happy with your new baby when I return to home base :-) Thanks in advance for your great work, really like the current Cura already so new one must be awesome when it is completely done.
  10. They just did during the world maker fair in New York: the ultimaker original plus. An original with heated printbed bed and 3 point leveling.
  11. Zie geen images in je album, kan het zijn dat dat het album private in plaats van public is?
  12. @Dim3nsioneer: I'm fully aware of that, still I'm curious about the future and like to help out were possible.
  13. And were can we find these nightly builds? Would love to test the linux version.
  14. Sounds like I will have enough attention for my blocked nozzle ;-)
  15. Colors were done in 8 steps, needed to do dark blue and purple in two steps due to limitations in scad, of about 10 minutes on average, single 0.2mm layer including filament change and removal of alignment border. The white back took about 45 minutes for two 0.3mm layers. Edit: and a wait of 16 hours for the missing light blue filament to arrive.
  16. Finally finished a 3D printed version of my avatar, so I'm ready for Monday evening :-) PS: Sander, I send you a PM with parts I would like.
  17. Seeing your picture it looks like you press the filament against the bowden tube to get the necessary pressure to transport the filament. Might give problems with less slippery filaments, so I would be like to know how it does with PLA as this is (as far as I understand) less slippery than ABS. Do like the big knob to adjust the tension, makes it easy to take away the tension completely to remove the filament.
  18. Denk dat het object los komt om dat het omhoogkrult omdat het loslaat van het bouwplatform en dat daarom de nozzle het voorwerp wegduwt. Is mij ook een paar keer overkomen. Edit: omdat het me ook maar niet wilde lukken om objecten goed te laten hechten heb ik uit eindelijk een van deze build plates besteld: http://printinz.com/printer-plates/ Nu is mijn grootste probleem dat sommige objecten moeilijk los laten. Gelukkig is de plaat flexibel en kan je met een beetje buigen het object los werken.
  19. Would love to see some pictures of that beautiful surface finish ;-)
  20. Voor zover ik het begrijp betekent een flow van 110 dat je inderdaad 110% van het in de gcode gevraagde filament extrude betekent dus inderdaad 10% meer dan Cura aangeeft. Tenminste dit geld voor normale print snelheden. Als je op de grens werkt, zoals hier, zul je met 100% under extrusion krijgen waardoor 110% (in combinatie met de hoge temperatuur) in werkelijkheid (ook door under extrution) weer in de buurt van 100 echte % uit komt. Hoeveel het echt is zal je eigenlijk niet kunnen bepalen maar als het er opties het zelfde uit ziet zal het niet veel schelen :-).
  21. :-O there is a manual? Maybe I should have read it before I unpacked mine and broke one of my limit switches, luckily I had an other one laying around :-)
  22. @Ignace: The nozzle temperature stays at zero until the print bed gets close to the set temperature this because the nozzle heats up much faster. Also when you go in to the tune menu while print bed is heating up so before the nozzle temperature is set it stays at 0 (even if bed has reached desired temperature) until you leave the tune menu. If you then go back into the tune menu you will see the nozzle temperature is set correctly. Hope this helps :-)
  23. Does not seem to happen with only 3 days to go they are well over $100,000 short of the required goal.
  24. De plugin is van pm_dude, dus niet van mij, maar ik test hem en geef mijn input door. In de huidige versie zie ik nog wat problemen met onnodig grote overgangs lagen maar in praktijk merk je daar niet zoveel van. Bij mijn test object moet ik hard kijken om het waar te nemen.
×
×
  • Create New...