-
Posts
3,778 -
Joined
-
Last visited
-
Days Won
76
Content Type
Forums
Events
3D Prints
3D Print posted by ultiarjan
-
Refil.nl > Recycled PET
The recycled PET prints very easy, I was positively surprised ... I got a free spool (thanks for that) as they used one of my 3dmodels in their video (look at www.refil.nl)
2,151 downloads
0 comments
Updated
-
dual extrusion pencil box
My first duration test of the dual head setup, this print took +/- 10 hours and >400 tool head changes.
Unfortunately the calibration was still a tiny bit of, but it's a nice clean print.
15mm retraction on tool change, +0.5mm compensation for leaking, layer 0.2, fill 15%
3,786 downloads
0 comments
Updated
-
Dual PLA on the 2 headed Ultimaker2
There's no other point in printing the green on every layer and the overdone infill other than testing the dual head setup. As you see there's really no pollution of the green PLA into the white.
3,611 downloads
0 comments
Updated
-
dust shoe for shapeoko3, with quick release height adjustment
dust shoe for shapeoko3, with quick release height adjustment
1,722 downloads
0 comments
Updated
-
2 new printed nylon axis give this lawn mower a 2th life.
got the broken discarded machine for free and just used it for the first time, working pretty nice.
472 downloads
0 comments
Updated
-
WedgeBot for Ultimaker2+
Is it a bird? is it a plane? NO it's WedgeBot.
Getting tired fingers? let this little guy stick his wedge into your feeder!
this thing is a redesign of;
https://www.youmagine.com/designs/the-wedge
and the famous Ultibot.
1,932 downloads
0 comments
Updated
-
+feeder bracket for U2RS
In case you want to keep using the rail system (U2RS) and want to upgrade to the new + feeder I published a simple bracket. Upgrading is pretty easy, specially when you reuse the feeder motor.
Get all parts for the feeder at your local distributor.
Your feeder motor needs to have the D-shaped axis to be able to reuse it.
- get the feeder parts at you local reseller.
- Print the bracket
- Mount the feeder (when you reuse it, the axis of the feeder motor has to stick 10mm out of the small gear)
Upgrade the firmware to Tinker 16.03.1
https://github.com/TinkerGnome/Ultimaker2Marlin/releases
Change the e steps from E282 to E564, with the fantastic @tinkergnome firmware you do this in preferences/motion settings.
link to rail system;
https://www.youmagine.com/designs/ultimaker2-rail-system-u2rs
1,318 downloads
0 comments
Submitted
-
0 comments
Updated
-
Dodecahedron rings - Nylon & PVA
23 hours, 0.2 layer height, plus a few hours dissolving with the ANOVA at 40 celsius.
1,238 downloads
0 comments
Updated
-
0 comments
Updated
-
0 comments
Updated
-
0 comments
Updated