Jump to content

b.bolk

Dormant
  • Posts

    3
  • Joined

  • Last visited

    Never

b.bolk's Achievements

0

Reputation

  1. Even when i turn brim off i won't get support. I think i just try to make some support with the 3D program and break it off later. Thanks for all your reactions!
  2. It is necessary to print the object this way. I moved my Distance but the only thing that changed was the support of the inside. Do you know why cura only support the inside and not grooves/lipes like this? I have worked with other 3D printers like the UP plus and i know almost for sure that their software did also support things at the outside like this no matter what direction the object is placed...
  3. At the office we have a ultimaker 2 since a couple of weeks. We are trying to make a prototype but the results are not good. In de 3D cad File we used the function Lip/Groove which is used on the edge where 2 sides of a product come together. When i try to print 1 of the 2 sides i position the part with the Lip/Groove to the bottom. De big holes of the part get support but the overlap of the Lip/Groove is not supported. This results in a print where the ultimaker tries to make this overlap in the air what gives a messy result. In the photo's you can see there is no support under the lip/groove. Has somebody advice for me?
×
×
  • Create New...