-
Content Count
11 -
Joined
-
Last visited
Community Reputation
40 ExcellentPersonal Information
-
Country
SE
-
Industry
(Product) design
Engineering - On The Web
Recent Profile Visitors
The recent visitors block is disabled and is not being shown to other users.
-
-
-
-
Version 1.0
2,003 downloads
This is the OpenR/C Formula 1 car. It´s the third generation OpenR/C car and this time around focus is on simplicity! You can print everything in PLA except the tires which are done in NinjaFlex! Of course you can print it in any material you like but for those that want to print a car but only have PLA at hand, this is the project for you! -
-
Version 1.0
1,646 downloads
This is the OpenR/C Formula 1 car. It´s the third generation OpenR/C and this time around focus is on simplicity! You can print everything in PLA except the tires which are done in NinjaFlex! Of course you can print it in any material you like but for those that want to print a car but only have PLA at hand, this is the project for you! Full story/interview about the project on Pinshape.com -
Version 1.0
2,228 downloads
This vase is based on the profile of the Central Differential 65T spur gear on the OpenRC Truggy. The base of the vase have the exact profile as the original spur gear. The vases on the pictures are printed on a ZYYX 3D printer with a enlarged nozzle (1.0mm) and the layers are 1.0mm. Print speed kept to a minimum (5.0mm/s) for optimal clarity of the Taulman T-Glase PETT material. -
Version 1.0
2,411 downloads
The EMD SW 1500 is a American diesel switcher locomotive made by General Motors' Electro-Motive Division during the 60's and 70's. Some 800 were made and there are several still in serivce in the United States. This 1:32 scale version of the EMD SW 1500 locomotive is part of "The OpenRailway Project" which is a Open Source initiative to bring more free model trains to the world. While having done several different 3Dprinting projects in the past i needed something with more attention todetail to 3Dprint. Since me and my dad had already built a garden railway (scale 1:32) it felt like a good i -
Version 1.0
2,114 downloads
This is a first go at a OpenRC Quadcopter. My goals when starting was to create a different design than what we usually see for 3D printed quads and enclose all electronics in the design itself. The idea was an experiment to create parts from a strong material with thin walls and low infill to keep the weight down. Everything is designed to fit the electronics from a DJI 450 Flamewheel. As you may have noticed i call this a "Beta" verion and that is becasue it´s simply not finished. While all parts do fit together there are things missing in the design. Hopefully someone can get something -
Version 1.0
2,122 downloads
Here´s where it all started, this was my first go at creating a printable rc car which later resulted in the OpenRC Truggy car. I learned alot from this car and so it is a little bit different. It is has belt drive and is built on a aluminum plate so it is not as "printable" as it´s successor, the Truggy (https://www.youmagine.com/designs/openr-c-1-10-4wd-truggy-concept-r-c-car). -
Version 1.0
3,293 downloads
Awarded a GrabCAD Golden Gear for "Top Open Engineering Project 2013"! This an ongoing project of creating a free for all Open Source RC car that can be printed (to a certain extent of course) at your personal FDM printer at home! I have tried to keep the design basic for easy modification for others in their favourite CAD software This is really a proof of concept and i´m very pleased with the result even if there is some work left to be done! Check out the PDF´s for assembly help. For help on what electronics to get see below. Join the discussion over at Google+:https://plus.google.c