alnavasa

January 14

Anyway to improve unstable wifi for the printer, I have a ultimaker original with octopi right by the side and I've never had issues printing with it, But the S5 tends to disconnect a lot.

I have also given the printer a fixed IP address from the router.

Here is a snippet from unifi wireless.

(of course I don't have Ethernet on that room.)

Wrong settings on default profile · January 11

Nice work there!

Wrong settings on default profile · January 9

Great news! Thanks!

January 5

Hi, I tried to print Ultimaker branded, new out of the box polycarbonate.

Ultimaker s5 8.2.0 software

Cura 5.6.0

I am getting some sort of horizontal expansion distortion in all layers directions,

Black is the same print in black ABS, Transparent is PC

Print file is "Bowden Clamp for Ultimaker (Heater End)" from Owen.

https://www.thingiverse.com/thing:11864

Some other pictures from while printing. I also see some kind of under extrusion on the grid of this piece, (not the others printed on this print)

Wrong settings on default profile · January 5

Thanks for the info, now I get it, 0.25 just for visual prints, not engineering,

I was looking for the finest functional prototype I could get with the 0.25, not sure now, but I think I also tried with 0.06 layer height.

In the past with PLA I tried 0.06 with the aa0.25 and it delaminated easily, thought it was a bad spool (very old one) I now get that that print core nd that profile are not meant to have strength with this print core just visual quality.

Thanks for all the info!

Wrong settings on default profile · January 4

Okey,

¿For print core 0.4 we use 2% fan speed and for print 0.25 core we use 40%? that's a huge difference, you sure this is right?

Its like going from no fan at all to almost half speed of fan (that we all know is almost like 80% in real life, not much difference on Ultimaker machines between 50% fan and 100% fan)

I am getting not good adhesion on first layer, I have printed a lot of ABS at 0.4 core with zero issues using just hairspray, I am talking about 20+ models with this same printer on default settings, and now, printing the same model with the 0.25 failed 3 times in a row. Using same hairspray using same spool of material, same room, same machine.

Wrong settings on default profile · January 4

After 4 unsuccessful prints I noticed something was not right

For whatever reason,

for print core AA 0.25 for ABS Regular Fan Speed is set to 40%

for print core AA 0.4 for ABS Regular Fan Speed is set to 2%

I have the feeling that other settings might be wrong too.

I thing this is a big issue that needs to are addressed soon in 5.6.1 version.

This is on a fresh install after I have just reformatted the complete OS of the computer

Cura 5.6.0

Mac OS 13.6.3 (22G436)

Ultimaker S5

January 2

Hi,

I just replaced that cable (And many other parts)

That cable is cheap, around 20€

I recomendable you to buy on the same order (to save shipping fees) the capacity cable (around 1€) and a couple of silicone spares for the nozzle cover (around 4€)

In my case my printer also had more than 3.000 hour, so I replaced the belts (recommended to be replaced after 4.000 hour), also replaced new print cores, new springs for the bed and new clips, as well as Bowden tubes and their clips.

Your head cable,

I recommend watching this video to see how the plug from the printhead is removed:

The cabe then traces to the back of the printer and into the motor cover. The monitor covers are just pushed in, just pull them gently first form one (I recommend the wall side) side and the from the other (the back side).

At this step you will need to lay down the printer,

on the side, put some cloth or similar to prevent the printer from scratching

Befor opening the bottom of the printer make sure that it is completely unplugged from the wall, It is not electrically safe to open below while the cable is connected (R1 version of the S5).

Also to prevent any ESD issues with the board I recommend you remove static from you, I personally touch the water radiator of the house metallic non painted part which is grounded so I get my self discharged, there is people that work with sensitive equipment that always have a cable connected to the ground to them to be completely off, not my case, but I just give it a touch before to prevent.

Then below there its pretty much straight forward, follow the cable take pictures before to follow after.

Also the cable has a position, one side goes to the printhead, and the other goes to the PCB below the printer, I think the one for the PCB below the printer has some sort extra heat shrink tubbing.

Also the capacity cable snapped off right after the overhaul, so I recommend changing it for what it is worth, actually is easier to change it while the printer is being manipulated.

The cable plugs in the back side of the printhead and the cables side just pull the older ones from the PCB and push the new ones into the PCB of the capacity sensor. They are NOT soldered (I read people soldering them here) they have a connector where you insert the cable, just by pushing it, then you pull to check if they are snug and don't move, If they move, pull them away, look at the clip that holds them, the clip has two arms on each of the sides that go in, if the cable is not being held inside, those two arms need to be pushed further in.

This video helped too:

January 2

Still crashing after fresh install (also having issues with plugging sync)

Incredible for a 6.000€ printer.

will report in GitHub too.

2024-01-02 11:28:05,333 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestError [369]: request[53c70cc2][get][PyQt6.QtCore.QUrl('https://api.ultimaker.com/connect/v1/clusters?status=active')][timeout=10][no-data] got an QNetworkReplyError Operation canceled. The server returned: None
2024-01-02 11:28:05,333 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestFinished [408]: request[53c70cc2][get][PyQt6.QtCore.QUrl('https://api.ultimaker.com/connect/v1/clusters?status=active')][timeout=10][no-data] was aborted, do nothing
2024-01-02 11:28:05,334 - ERROR - [MainThread] cura.API.Account.error_callback [373]: Request for user permissions list failed. Network error: NetworkError.OperationCanceledError
2024-01-02 11:28:06,331 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 1220.7764253616333 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2024-01-02 11:28:08,331 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 1222.776622056961 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2024-01-02 11:28:10,331 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 1224.7765412330627 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2024-01-02 11:28:12,331 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 1226.7761301994324 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2024-01-02 11:28:14,331 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestTimeout [295]: Request [<UM.TaskManagement.HttpRequestManager.HttpRequestManager object at 0x12612d750>] timeout.
2024-01-02 11:28:14,331 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 1228.7768850326538 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2024-01-02 11:28:14,494 - WARNING - [MainThread] cura.OAuth2.AuthorizationService.refreshAccessToken [162]: Unable to refresh access token, since there is no refresh token.
2024-01-02 11:28:14,502 - DEBUG - [MainThread] cura.UltimakerCloud.UltimakerCloudScope.requestHook [30]: User is not logged in for Cloud API request to https://api.ultimaker.com/connect/v1/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status
2024-01-02 11:28:14,503 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestError [369]: request[1749380a][get][PyQt6.QtCore.QUrl('https://api.ultimaker.com/cura-packages/v1/user/packages')][timeout=10][no-data] got an QNetworkReplyError Operation canceled. The server returned: None
2024-01-02 11:28:14,504 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestFinished [408]: request[1749380a][get][PyQt6.QtCore.QUrl('https://api.ultimaker.com/cura-packages/v1/user/packages')][timeout=10][no-data] was aborted, do nothing
2024-01-02 11:28:14,505 - WARNING - [MainThread] Marketplace.CloudSync.CloudPackageChecker._onUserPackagesRequestFinished [76]: Requesting user packages failed, response code -1 while trying to connect to PyQt6.QtCore.QUrl('https://api.ultimaker.com/cura-packages/v1/user/packages')
2024-01-02 11:28:14,507 - CRITICAL - [MainThread] cura.CrashHandler.__init__ [66]: An uncaught error has occurred!
2024-01-02 11:28:14,507 - CRITICAL - [MainThread] cura.CrashHandler.__init__ [69]: Traceback (most recent call last):
2024-01-02 11:28:14,508 - CRITICAL - [MainThread] cura.CrashHandler.__init__ [69]:   File "UM/ColorImage.py", line 42, in setSource
2024-01-02 11:28:14,508 - CRITICAL - [MainThread] cura.CrashHandler.__init__ [69]:   File "UM/ColorImage.py", line 29, in _updateSVG
2024-01-02 11:28:14,509 - CRITICAL - [MainThread] cura.CrashHandler.__init__ [69]: OSError: [Errno 24] Too many open files: '/Applications/UltiMaker Cura.app/Contents/MacOS/share/cura/resources/themes/cura-light/icons/default/Warning.svg'

cura.log

January 1

Thanks for all the info, I removed the electronics, and cleaned excessive glue, pads remained in place, it was just the glue being too soft, why?, I don't know,

Now everything is in place and the glue holds together without excessive glue spilling around, All good.

Thanks for the info!

December 27, 2023

Is there any consideration by the ultimaker team to use the material station as a color station as other brands are currently doing (we all know who)

From what I read currently this is not possible and it is not what the station was thought to be used for, but I don't see any reason why you couldn't do it and purge the different materials on the sides, and maybe ultimaker could sell (or share the file to print) some sort of purging basket to "glue" on the sides of the machine, this way this kind of prints could be possible,

I know this kind of multicolor prints are very slow, and since the rivalry company is a "fast printer" this may leave ultimaker poorly rated when compared in speed multi color prints, but, we don't have a ultimaker for speed, we have it for build quality and precision, so I don't think this comparison would go anywhere

December 27, 2023

Reading posts from this forum, and receiving no answers from any member of the team, either this or other posts, leaves me amazed, coming from 10+ years ago with the wood ultimaker original that I have, this forum (actually the old one) was gold with a lot of support from oficial and non oficial members, this now seems gone, and everything looks to go via a "profesional" dealer way. I kind of have the feeling that Ultimaker is dying or they only care for the people that have premium deal support. If anyone from the stuff reads this, correct me if I am wrong.

December 27, 2023

No one? The community from the old ultimaker forum, from the time when I had the wood made ultimaker original, around 2012-2013 where active members of the community and helped others is totally gone.

Some are still around like @gr5, but if feel totally abandoned, and back in that time there was a lot of help and support. I have the feeling ultimaker left the home user, or home pro user alone and the only way to get support is from official dealers paying.

December 26, 2023

This picture is before cleaning two weeks ago.

December 26, 2023

Hi,

I recently acquired a 3000 hour second hand used ultimaker s5 r1

I was changing the printhead cable yesterday, (I broke the tab of it at the printhead while cleaning a lot of debris from the printhead itself), when I noticed that the PCB connector for the printhead at the PCB was not very clean (already cleaned when I took the picture), and further inspection revealed some sort of oil/glue and some pads on the side between the PCB and the ultimaker bottom, is this normal?

I don't want to remove all the electronics, but I can do it if you think it is not normal,

I don't know if this is factory glue, or that the previous owner spilled oil around the bottom of the machine.

Also RED pc looks like it has some corrosion,

Pictures look all worse than this actually is.

I know S5 R1 danger for electronics, I completely unplug it from the wall before opening it.

December 11, 2023

Is there a way to disable this?

Do I need to get rid of the ultimaker essentials packages to install this other plugins, if so, Will I loose all the digital factory cloud, remote management and libraries?

Materials & profiles · December 8, 2023

You guys still using PC??

I am thinking of using it fro strong functional mechanical prototyping,

Wonder if there's any new ways people are heading for this applications.

December 5, 2023

Fresh install still with issues :S

Can be followed on GitHub, (no answers yet)

https://github.com/Ultimaker/Cura/issues/17508

December 5, 2023

New camera fitted, Everything working fine now.

Materials & profiles · December 4, 2023

I was planning on getting this material for the S5, as the hardest and strongest material to print, but, Reading this is pushing me back, what are your outcomes to the problem?

December 3, 2023

New clean and fresh install and Loggin lists after wake up from sleep, so it is defenelty an issue, Ill report at github

cura.log

November 28, 2023

Just crashed while I was reading in safari was reading a website. Log attached, I will completely remove the cura software from the computer and re install it again.

cura.log

November 28, 2023

Sign in is lost, and therefore cloud printer, Trying cura enterprise now when this happened,

cura.log

November 27, 2023

It didn't crash, but when opening all settings, printer, and login where gone, log file attached

log after automatically sign off.log

November 26, 2023

@Slashee_the_Cow

This is current log right now, next time it crashes ill send it again:

2023-11-26 10:23:22,073 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2463.826171875 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:23:24,073 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2465.82577419281 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:23:26,071 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2467.824261903763 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:23:28,071 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2469.824089050293 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:23:28,078 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.refreshAccessToken [174]: Was already busy refreshing token. Do not start a new request.
2023-11-26 10:23:28,138 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestError [369]: request[23f37cb9][get][PyQt6.QtCore.QUrl('https://api.ultimaker.com/connect/v1/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status')][timeout=10][no-data] got an QNetworkReplyError Error transferring https://api.ultimaker.com/connect/v1/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status - server replied: . The server returned: b'{"errors": [{"id": "bec763ad-4e51-458a-b494-13d2440d4081", "code": "tokenExpired", "http_status": "403", "title": "The given token has expired.", "detail": "Signature has expired", "meta": {"error_type": "AuthError", "url": "https://api.ultimaker.com/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status"}}]}'
2023-11-26 10:23:30,073 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2471.8252091407776 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:23:32,072 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2473.8253090381622 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:23:34,072 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2475.8254499435425 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:23:36,073 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2477.825525045395 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:23:38,074 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2479.8267130851746 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:23:38,085 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.refreshAccessToken [174]: Was already busy refreshing token. Do not start a new request.
2023-11-26 10:23:38,158 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestError [369]: request[d106f1ca][get][PyQt6.QtCore.QUrl('https://api.ultimaker.com/connect/v1/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status')][timeout=10][no-data] got an QNetworkReplyError Error transferring https://api.ultimaker.com/connect/v1/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status - server replied: . The server returned: b'{"errors": [{"id": "7b80dc4e-1a32-44ac-b30c-fc7265eeecf0", "code": "tokenExpired", "http_status": "403", "title": "The given token has expired.", "detail": "Signature has expired", "meta": {"error_type": "AuthError", "url": "https://api.ultimaker.com/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status"}}]}'
2023-11-26 10:23:40,072 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2481.8249549865723 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:23:42,072 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2483.8248839378357 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:23:44,071 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2485.8239109516144 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:23:46,073 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2487.8256709575653 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:23:48,073 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2489.8256480693817 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:23:50,071 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2491.8237891197205 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:23:50,078 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.refreshAccessToken [174]: Was already busy refreshing token. Do not start a new request.
2023-11-26 10:23:50,280 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestError [369]: request[fecbf574][get][PyQt6.QtCore.QUrl('https://api.ultimaker.com/connect/v1/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status')][timeout=10][no-data] got an QNetworkReplyError Error transferring https://api.ultimaker.com/connect/v1/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status - server replied: . The server returned: b'{"errors": [{"id": "e63cb954-c213-4304-94af-c3742511ecec", "code": "tokenExpired", "http_status": "403", "title": "The given token has expired.", "detail": "Signature has expired", "meta": {"error_type": "AuthError", "url": "https://api.ultimaker.com/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status"}}]}'
2023-11-26 10:23:52,072 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2493.8244500160217 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:23:54,071 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2495.823985815048 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:23:56,074 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2497.826623916626 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:23:58,071 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2499.8240480422974 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:24:00,072 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2501.8252217769623 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:24:00,079 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.refreshAccessToken [174]: Was already busy refreshing token. Do not start a new request.
2023-11-26 10:24:00,137 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestError [369]: request[10e0ce02][get][PyQt6.QtCore.QUrl('https://api.ultimaker.com/connect/v1/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status')][timeout=10][no-data] got an QNetworkReplyError Error transferring https://api.ultimaker.com/connect/v1/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status - server replied: . The server returned: b'{"errors": [{"id": "1aa9e5bc-7543-4925-9257-92c5c81e9e1a", "code": "tokenExpired", "http_status": "403", "title": "The given token has expired.", "detail": "Signature has expired", "meta": {"error_type": "AuthError", "url": "https://api.ultimaker.com/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status"}}]}'
2023-11-26 10:24:02,075 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2503.8273470401764 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:24:04,070 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2505.8232650756836 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:24:06,072 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2507.8250119686127 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:24:08,072 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2509.824877023697 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:24:10,073 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2511.824098110199 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:24:10,080 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.refreshAccessToken [174]: Was already busy refreshing token. Do not start a new request.
2023-11-26 10:24:10,142 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestError [369]: request[951f7fcd][get][PyQt6.QtCore.QUrl('https://api.ultimaker.com/connect/v1/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status')][timeout=10][no-data] got an QNetworkReplyError Error transferring https://api.ultimaker.com/connect/v1/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status - server replied: . The server returned: b'{"errors": [{"id": "6454bf15-e16d-4cf6-a855-69c872aa9ce4", "code": "tokenExpired", "http_status": "403", "title": "The given token has expired.", "detail": "Signature has expired", "meta": {"error_type": "AuthError", "url": "https://api.ultimaker.com/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status"}}]}'
2023-11-26 10:24:12,073 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2513.8255739212036 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:24:13,572 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.refreshAccessToken [174]: Was already busy refreshing token. Do not start a new request.
2023-11-26 10:24:13,577 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.refreshAccessToken [174]: Was already busy refreshing token. Do not start a new request.
2023-11-26 10:24:13,580 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.refreshAccessToken [174]: Was already busy refreshing token. Do not start a new request.
2023-11-26 10:24:13,633 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestError [369]: request[93b82cff][get][PyQt6.QtCore.QUrl('https://api.ultimaker.com/connect/v1/clusters?status=active')][timeout=10][no-data] got an QNetworkReplyError Error transferring https://api.ultimaker.com/connect/v1/clusters?status=active - server replied: . The server returned: b'{"errors": [{"id": "1c3ccf9d-701f-4661-92e8-1ad7b265e42f", "code": "tokenExpired", "http_status": "403", "title": "The given token has expired.", "detail": "Signature has expired", "meta": {"error_type": "AuthError", "url": "https://api.ultimaker.com/clusters?status=active"}}]}'
2023-11-26 10:24:13,634 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestError [369]: request[4f4efcde][get][PyQt6.QtCore.QUrl('https://api.ultimaker.com/cura-packages/v1/user/packages')][timeout=10][no-data] got an QNetworkReplyError Error transferring https://api.ultimaker.com/cura-packages/v1/user/packages - server replied: . The server returned: b'{"errors": [{"id": "90933f0c-fc24-470a-a040-196f3ec2f6e8", "code": "tokenExpired", "http_status": "403", "title": "The given token has expired.", "detail": "Signature has expired", "meta": {"error_type": "AuthError", "url": "https://api.ultimaker.com/user/packages"}}]}'
2023-11-26 10:24:13,635 - WARNING - [MainThread] Marketplace.CloudSync.CloudPackageChecker._onUserPackagesRequestFinished [76]: Requesting user packages failed, response code 403 while trying to connect to PyQt6.QtCore.QUrl('https://api.ultimaker.com/cura-packages/v1/user/packages')
2023-11-26 10:24:13,639 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestError [369]: request[ff292568][get][PyQt6.QtCore.QUrl('https://account.ultimaker.com/users/permissions')][timeout=10][no-data] got an QNetworkReplyError Error transferring https://account.ultimaker.com/users/permissions - server replied: . The server returned: b'{"errors": [{"id": "b649d60c-6f2a-41fb-9555-d2cccca34f1b", "code": "tokenExpired", "http_status": "403", "title": "The given token has expired.", "meta": {"error_type": "AuthError", "url": "https://account.ultimaker.com/users/permissions"}}]}'
2023-11-26 10:24:13,639 - ERROR - [MainThread] cura.API.Account.error_callback [373]: Request for user permissions list failed. Network error: NetworkError.ContentAccessDenied
2023-11-26 10:24:14,073 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2515.8260102272034 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:24:16,071 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2517.824203014374 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:24:18,071 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2519.8240399360657 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:24:20,072 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2521.825005054474 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:24:22,073 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2523.8259630203247 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:24:22,080 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.refreshAccessToken [174]: Was already busy refreshing token. Do not start a new request.
2023-11-26 10:24:22,142 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestError [369]: request[058b4efd][get][PyQt6.QtCore.QUrl('https://api.ultimaker.com/connect/v1/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status')][timeout=10][no-data] got an QNetworkReplyError Error transferring https://api.ultimaker.com/connect/v1/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status - server replied: . The server returned: b'{"errors": [{"id": "fb49e7b5-809b-422e-8d87-e5b84d4f5522", "code": "tokenExpired", "http_status": "403", "title": "The given token has expired.", "detail": "Signature has expired", "meta": {"error_type": "AuthError", "url": "https://api.ultimaker.com/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status"}}]}'
2023-11-26 10:24:24,071 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2525.823513031006 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:24:26,072 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2527.8250398635864 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:24:28,073 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2529.8253161907196 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:24:30,071 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2531.8239481449127 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:24:32,070 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2533.822832107544 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:24:34,072 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2535.8243770599365 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:24:34,080 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.refreshAccessToken [174]: Was already busy refreshing token. Do not start a new request.
2023-11-26 10:24:34,150 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestError [369]: request[e24a90e3][get][PyQt6.QtCore.QUrl('https://api.ultimaker.com/connect/v1/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status')][timeout=10][no-data] got an QNetworkReplyError Error transferring https://api.ultimaker.com/connect/v1/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status - server replied: . The server returned: b'{"errors": [{"id": "3bcbb5f0-4fdf-421e-a36d-df9d6d14d0f8", "code": "tokenExpired", "http_status": "403", "title": "The given token has expired.", "detail": "Signature has expired", "meta": {"error_type": "AuthError", "url": "https://api.ultimaker.com/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status"}}]}'
2023-11-26 10:24:36,070 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2537.8232090473175 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:24:38,072 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2539.8247129917145 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:24:40,070 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2541.823317050934 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:24:42,071 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2543.8245661258698 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:24:44,071 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2545.82372879982 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:24:46,071 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2547.824150085449 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:24:46,078 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.refreshAccessToken [174]: Was already busy refreshing token. Do not start a new request.
2023-11-26 10:24:46,133 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestError [369]: request[090a68d2][get][PyQt6.QtCore.QUrl('https://api.ultimaker.com/connect/v1/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status')][timeout=10][no-data] got an QNetworkReplyError Error transferring https://api.ultimaker.com/connect/v1/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status - server replied: . The server returned: b'{"errors": [{"id": "8804275d-99f3-4fd9-abfe-0a1d6475838b", "code": "tokenExpired", "http_status": "403", "title": "The given token has expired.", "detail": "Signature has expired", "meta": {"error_type": "AuthError", "url": "https://api.ultimaker.com/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status"}}]}'
2023-11-26 10:24:48,069 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2549.822651863098 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:24:50,072 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2551.824986219406 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:24:52,071 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2553.823511123657 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:24:54,072 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2555.8242008686066 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:24:56,070 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2557.8230290412903 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:24:58,070 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2559.8236060142517 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:24:58,077 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.refreshAccessToken [174]: Was already busy refreshing token. Do not start a new request.
2023-11-26 10:24:58,129 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestError [369]: request[5563c034][get][PyQt6.QtCore.QUrl('https://api.ultimaker.com/connect/v1/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status')][timeout=10][no-data] got an QNetworkReplyError Error transferring https://api.ultimaker.com/connect/v1/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status - server replied: . The server returned: b'{"errors": [{"id": "8532241c-18af-444e-bfda-c3e806d2e8a2", "code": "tokenExpired", "http_status": "403", "title": "The given token has expired.", "detail": "Signature has expired", "meta": {"error_type": "AuthError", "url": "https://api.ultimaker.com/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status"}}]}'
2023-11-26 10:25:00,071 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2561.82355093956 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:25:02,071 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2563.823709964752 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:25:04,071 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2565.8235771656036 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:25:06,071 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2567.8239800930023 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:25:08,069 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2569.8222489356995 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:25:10,071 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2571.8236830234528 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:25:10,077 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.refreshAccessToken [174]: Was already busy refreshing token. Do not start a new request.
2023-11-26 10:25:10,148 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestError [369]: request[18aec8d0][get][PyQt6.QtCore.QUrl('https://api.ultimaker.com/connect/v1/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status')][timeout=10][no-data] got an QNetworkReplyError Error transferring https://api.ultimaker.com/connect/v1/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status - server replied: . The server returned: b'{"errors": [{"id": "84b979b5-7bb4-48da-8f12-8621766afb79", "code": "tokenExpired", "http_status": "403", "title": "The given token has expired.", "detail": "Signature has expired", "meta": {"error_type": "AuthError", "url": "https://api.ultimaker.com/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status"}}]}'
2023-11-26 10:25:12,070 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2573.8229701519012 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:25:13,571 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.refreshAccessToken [174]: Was already busy refreshing token. Do not start a new request.
2023-11-26 10:25:13,575 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.refreshAccessToken [174]: Was already busy refreshing token. Do not start a new request.
2023-11-26 10:25:13,579 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.refreshAccessToken [174]: Was already busy refreshing token. Do not start a new request.
2023-11-26 10:25:13,642 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestError [369]: request[e186f263][get][PyQt6.QtCore.QUrl('https://api.ultimaker.com/connect/v1/clusters?status=active')][timeout=10][no-data] got an QNetworkReplyError Error transferring https://api.ultimaker.com/connect/v1/clusters?status=active - server replied: . The server returned: b'{"errors": [{"id": "6ece2675-d67f-4133-a53e-30306b256fbb", "code": "tokenExpired", "http_status": "403", "title": "The given token has expired.", "detail": "Signature has expired", "meta": {"error_type": "AuthError", "url": "https://api.ultimaker.com/clusters?status=active"}}]}'
2023-11-26 10:25:13,647 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestError [369]: request[a17527a1][get][PyQt6.QtCore.QUrl('https://account.ultimaker.com/users/permissions')][timeout=10][no-data] got an QNetworkReplyError Error transferring https://account.ultimaker.com/users/permissions - server replied: . The server returned: b'{"errors": [{"id": "1dcd3c01-8efa-46ce-9b00-7065c1fc484d", "code": "tokenExpired", "http_status": "403", "title": "The given token has expired.", "meta": {"error_type": "AuthError", "url": "https://account.ultimaker.com/users/permissions"}}]}'
2023-11-26 10:25:13,647 - ERROR - [MainThread] cura.API.Account.error_callback [373]: Request for user permissions list failed. Network error: NetworkError.ContentAccessDenied
2023-11-26 10:25:13,668 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestError [369]: request[bed40282][get][PyQt6.QtCore.QUrl('https://api.ultimaker.com/cura-packages/v1/user/packages')][timeout=10][no-data] got an QNetworkReplyError Error transferring https://api.ultimaker.com/cura-packages/v1/user/packages - server replied: . The server returned: b'{"errors": [{"id": "e016d016-0a45-49ef-8c44-062123bf9bd6", "code": "tokenExpired", "http_status": "403", "title": "The given token has expired.", "detail": "Signature has expired", "meta": {"error_type": "AuthError", "url": "https://api.ultimaker.com/user/packages"}}]}'
2023-11-26 10:25:13,668 - WARNING - [MainThread] Marketplace.CloudSync.CloudPackageChecker._onUserPackagesRequestFinished [76]: Requesting user packages failed, response code 403 while trying to connect to PyQt6.QtCore.QUrl('https://api.ultimaker.com/cura-packages/v1/user/packages')
2023-11-26 10:25:14,070 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2575.8230509757996 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:25:16,070 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2577.8231449127197 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:25:18,070 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2579.8229310512543 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:25:20,069 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2581.8226470947266 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:25:22,070 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2583.8225910663605 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:25:22,077 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.refreshAccessToken [174]: Was already busy refreshing token. Do not start a new request.
2023-11-26 10:25:22,136 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestError [369]: request[25c49408][get][PyQt6.QtCore.QUrl('https://api.ultimaker.com/connect/v1/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status')][timeout=10][no-data] got an QNetworkReplyError Error transferring https://api.ultimaker.com/connect/v1/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status - server replied: . The server returned: b'{"errors": [{"id": "fd579b9f-4635-4be9-b69f-4f0f996779d6", "code": "tokenExpired", "http_status": "403", "title": "The given token has expired.", "detail": "Signature has expired", "meta": {"error_type": "AuthError", "url": "https://api.ultimaker.com/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status"}}]}'
2023-11-26 10:25:24,069 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2585.8224267959595 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:25:26,070 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2587.8224580287933 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:25:28,071 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2589.8238179683685 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:25:30,069 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2591.8225100040436 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:25:32,070 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2593.8224790096283 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:25:34,071 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2595.8238310813904 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:25:34,078 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.refreshAccessToken [174]: Was already busy refreshing token. Do not start a new request.
2023-11-26 10:25:34,145 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestError [369]: request[c5682622][get][PyQt6.QtCore.QUrl('https://api.ultimaker.com/connect/v1/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status')][timeout=10][no-data] got an QNetworkReplyError Error transferring https://api.ultimaker.com/connect/v1/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status - server replied: . The server returned: b'{"errors": [{"id": "08086d61-bf7c-4579-91b8-d298814f23b0", "code": "tokenExpired", "http_status": "403", "title": "The given token has expired.", "detail": "Signature has expired", "meta": {"error_type": "AuthError", "url": "https://api.ultimaker.com/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status"}}]}'
2023-11-26 10:25:36,075 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2597.827333211899 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:25:38,070 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2599.822974920273 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:25:40,070 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2601.823266029358 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:25:42,071 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2603.823714017868 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:25:44,069 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2605.822124004364 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:25:46,069 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2607.822259902954 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:25:46,076 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.refreshAccessToken [174]: Was already busy refreshing token. Do not start a new request.
2023-11-26 10:25:46,139 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestError [369]: request[1e883317][get][PyQt6.QtCore.QUrl('https://api.ultimaker.com/connect/v1/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status')][timeout=10][no-data] got an QNetworkReplyError Error transferring https://api.ultimaker.com/connect/v1/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status - server replied: . The server returned: b'{"errors": [{"id": "5627ff45-0366-4dbc-8631-10c7e4853574", "code": "tokenExpired", "http_status": "403", "title": "The given token has expired.", "detail": "Signature has expired", "meta": {"error_type": "AuthError", "url": "https://api.ultimaker.com/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status"}}]}'
2023-11-26 10:25:48,071 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2609.823422908783 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:25:50,069 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2611.8221938610077 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:25:52,070 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2613.822515964508 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:25:54,070 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2615.8229570388794 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:25:56,071 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2617.8233971595764 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:25:56,079 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.refreshAccessToken [174]: Was already busy refreshing token. Do not start a new request.
2023-11-26 10:25:56,135 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestError [369]: request[c0999feb][get][PyQt6.QtCore.QUrl('https://api.ultimaker.com/connect/v1/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status')][timeout=10][no-data] got an QNetworkReplyError Error transferring https://api.ultimaker.com/connect/v1/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status - server replied: . The server returned: b'{"errors": [{"id": "18c8f077-eb83-4195-8ba4-12caa24700db", "code": "tokenExpired", "http_status": "403", "title": "The given token has expired.", "detail": "Signature has expired", "meta": {"error_type": "AuthError", "url": "https://api.ultimaker.com/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status"}}]}'
2023-11-26 10:25:58,072 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2619.824196100235 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:26:00,070 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2621.822788000107 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:26:02,070 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2623.823312997818 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:26:04,070 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2625.822791814804 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:26:06,071 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2627.8227319717407 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:26:06,079 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.refreshAccessToken [174]: Was already busy refreshing token. Do not start a new request.
2023-11-26 10:26:06,173 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestError [369]: request[1d6b15c1][get][PyQt6.QtCore.QUrl('https://api.ultimaker.com/connect/v1/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status')][timeout=10][no-data] got an QNetworkReplyError Error transferring https://api.ultimaker.com/connect/v1/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status - server replied: . The server returned: b'{"errors": [{"id": "919bff39-32f1-435d-befb-d9bd8e5c6084", "code": "tokenExpired", "http_status": "403", "title": "The given token has expired.", "detail": "Signature has expired", "meta": {"error_type": "AuthError", "url": "https://api.ultimaker.com/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status"}}]}'
2023-11-26 10:26:08,071 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2629.8235840797424 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:26:10,070 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2631.8228809833527 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:26:12,069 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2633.8218438625336 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:26:13,576 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.refreshAccessToken [174]: Was already busy refreshing token. Do not start a new request.
2023-11-26 10:26:13,580 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.refreshAccessToken [174]: Was already busy refreshing token. Do not start a new request.
2023-11-26 10:26:13,584 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.refreshAccessToken [174]: Was already busy refreshing token. Do not start a new request.
2023-11-26 10:26:13,644 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestError [369]: request[23ffa747][get][PyQt6.QtCore.QUrl('https://api.ultimaker.com/cura-packages/v1/user/packages')][timeout=10][no-data] got an QNetworkReplyError Error transferring https://api.ultimaker.com/cura-packages/v1/user/packages - server replied: . The server returned: b'{"errors": [{"id": "518ee038-3018-46ef-80de-a087d560efbb", "code": "tokenExpired", "http_status": "403", "title": "The given token has expired.", "detail": "Signature has expired", "meta": {"error_type": "AuthError", "url": "https://api.ultimaker.com/user/packages"}}]}'
2023-11-26 10:26:13,645 - WARNING - [MainThread] Marketplace.CloudSync.CloudPackageChecker._onUserPackagesRequestFinished [76]: Requesting user packages failed, response code 403 while trying to connect to PyQt6.QtCore.QUrl('https://api.ultimaker.com/cura-packages/v1/user/packages')
2023-11-26 10:26:13,646 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestError [369]: request[00a65f66][get][PyQt6.QtCore.QUrl('https://api.ultimaker.com/connect/v1/clusters?status=active')][timeout=10][no-data] got an QNetworkReplyError Error transferring https://api.ultimaker.com/connect/v1/clusters?status=active - server replied: . The server returned: b'{"errors": [{"id": "0de82cc5-a0aa-41f2-ae56-c32b505d19af", "code": "tokenExpired", "http_status": "403", "title": "The given token has expired.", "detail": "Signature has expired", "meta": {"error_type": "AuthError", "url": "https://api.ultimaker.com/clusters?status=active"}}]}'
2023-11-26 10:26:13,828 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestError [369]: request[3fa26ac9][get][PyQt6.QtCore.QUrl('https://account.ultimaker.com/users/permissions')][timeout=10][no-data] got an QNetworkReplyError Error transferring https://account.ultimaker.com/users/permissions - server replied: . The server returned: b'{"errors": [{"id": "eff6cf49-51a8-4898-a6a8-5794c6f8ee0f", "code": "tokenExpired", "http_status": "403", "title": "The given token has expired.", "meta": {"error_type": "AuthError", "url": "https://account.ultimaker.com/users/permissions"}}]}'
2023-11-26 10:26:13,829 - ERROR - [MainThread] cura.API.Account.error_callback [373]: Request for user permissions list failed. Network error: NetworkError.ContentAccessDenied
2023-11-26 10:26:14,070 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2635.8232231140137 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:26:16,070 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2637.8229608535767 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:26:18,070 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2639.82270693779 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:26:18,072 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.refreshAccessToken [174]: Was already busy refreshing token. Do not start a new request.
2023-11-26 10:26:18,130 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestError [369]: request[6da6cf97][get][PyQt6.QtCore.QUrl('https://api.ultimaker.com/connect/v1/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status')][timeout=10][no-data] got an QNetworkReplyError Error transferring https://api.ultimaker.com/connect/v1/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status - server replied: . The server returned: b'{"errors": [{"id": "43c45b22-ac00-449f-8039-4478cd9f760f", "code": "tokenExpired", "http_status": "403", "title": "The given token has expired.", "detail": "Signature has expired", "meta": {"error_type": "AuthError", "url": "https://api.ultimaker.com/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status"}}]}'
2023-11-26 10:26:20,072 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2641.824527025223 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:26:22,071 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2643.823621034622 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:26:24,072 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2645.8238232135773 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:26:26,069 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2647.8221209049225 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:26:28,070 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2649.8228669166565 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:26:28,079 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.refreshAccessToken [174]: Was already busy refreshing token. Do not start a new request.
2023-11-26 10:26:28,137 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestError [369]: request[8de6142b][get][PyQt6.QtCore.QUrl('https://api.ultimaker.com/connect/v1/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status')][timeout=10][no-data] got an QNetworkReplyError Error transferring https://api.ultimaker.com/connect/v1/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status - server replied: . The server returned: b'{"errors": [{"id": "ec45831b-dd8a-42cf-ba4f-31a8032b50bd", "code": "tokenExpired", "http_status": "403", "title": "The given token has expired.", "detail": "Signature has expired", "meta": {"error_type": "AuthError", "url": "https://api.ultimaker.com/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status"}}]}'
2023-11-26 10:26:30,070 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2651.822587966919 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:26:32,070 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2653.8227610588074 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:26:34,073 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2655.8252458572388 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:26:36,070 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2657.822131872177 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:26:38,071 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2659.82413482666 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:26:38,080 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.refreshAccessToken [174]: Was already busy refreshing token. Do not start a new request.
2023-11-26 10:26:38,138 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestError [369]: request[28b1399f][get][PyQt6.QtCore.QUrl('https://api.ultimaker.com/connect/v1/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status')][timeout=10][no-data] got an QNetworkReplyError Error transferring https://api.ultimaker.com/connect/v1/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status - server replied: . The server returned: b'{"errors": [{"id": "fe1e2150-beaa-4d79-a1f5-7bc47381469e", "code": "tokenExpired", "http_status": "403", "title": "The given token has expired.", "detail": "Signature has expired", "meta": {"error_type": "AuthError", "url": "https://api.ultimaker.com/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status"}}]}'
2023-11-26 10:26:40,070 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2661.8229150772095 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:26:42,069 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2663.821925878525 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:26:44,069 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2665.822380065918 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:26:46,069 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2667.8218080997467 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:26:48,069 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2669.8219141960144 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:26:50,073 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2671.8253371715546 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:26:50,080 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.refreshAccessToken [174]: Was already busy refreshing token. Do not start a new request.
2023-11-26 10:26:50,141 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestError [369]: request[bbc6b88a][get][PyQt6.QtCore.QUrl('https://api.ultimaker.com/connect/v1/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status')][timeout=10][no-data] got an QNetworkReplyError Error transferring https://api.ultimaker.com/connect/v1/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status - server replied: . The server returned: b'{"errors": [{"id": "5fb18c01-fcd4-4f24-8197-45662b145072", "code": "tokenExpired", "http_status": "403", "title": "The given token has expired.", "detail": "Signature has expired", "meta": {"error_type": "AuthError", "url": "https://api.ultimaker.com/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status"}}]}'
2023-11-26 10:26:52,072 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2673.8239119052887 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:26:54,069 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2675.8218579292297 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:26:56,070 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2677.8225820064545 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:26:58,069 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2679.8216829299927 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:27:00,070 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2681.8227269649506 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:27:02,071 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2683.823473930359 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:27:02,079 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.refreshAccessToken [174]: Was already busy refreshing token. Do not start a new request.
2023-11-26 10:27:02,138 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestError [369]: request[9b2f1142][get][PyQt6.QtCore.QUrl('https://api.ultimaker.com/connect/v1/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status')][timeout=10][no-data] got an QNetworkReplyError Error transferring https://api.ultimaker.com/connect/v1/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status - server replied: . The server returned: b'{"errors": [{"id": "97ca37fc-ad29-45a3-9334-92247db792ae", "code": "tokenExpired", "http_status": "403", "title": "The given token has expired.", "detail": "Signature has expired", "meta": {"error_type": "AuthError", "url": "https://api.ultimaker.com/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status"}}]}'
2023-11-26 10:27:04,069 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2685.821702003479 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:27:06,069 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2687.8216729164124 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:27:08,069 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2689.821798801422 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:27:10,068 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2691.8212130069733 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:27:12,069 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2693.822002887726 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:27:13,575 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.refreshAccessToken [174]: Was already busy refreshing token. Do not start a new request.
2023-11-26 10:27:13,580 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.refreshAccessToken [174]: Was already busy refreshing token. Do not start a new request.
2023-11-26 10:27:13,583 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.refreshAccessToken [174]: Was already busy refreshing token. Do not start a new request.
2023-11-26 10:27:13,638 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestError [369]: request[4e7f408c][get][PyQt6.QtCore.QUrl('https://account.ultimaker.com/users/permissions')][timeout=10][no-data] got an QNetworkReplyError Error transferring https://account.ultimaker.com/users/permissions - server replied: . The server returned: b'{"errors": [{"id": "b64f14c4-a325-4254-b195-6ef98efe6751", "code": "tokenExpired", "http_status": "403", "title": "The given token has expired.", "meta": {"error_type": "AuthError", "url": "https://account.ultimaker.com/users/permissions"}}]}'
2023-11-26 10:27:13,639 - ERROR - [MainThread] cura.API.Account.error_callback [373]: Request for user permissions list failed. Network error: NetworkError.ContentAccessDenied
2023-11-26 10:27:13,639 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestError [369]: request[297430cc][get][PyQt6.QtCore.QUrl('https://api.ultimaker.com/connect/v1/clusters?status=active')][timeout=10][no-data] got an QNetworkReplyError Error transferring https://api.ultimaker.com/connect/v1/clusters?status=active - server replied: . The server returned: b'{"errors": [{"id": "93299137-c324-4d7e-93ae-2a51e0bf0826", "code": "tokenExpired", "http_status": "403", "title": "The given token has expired.", "detail": "Signature has expired", "meta": {"error_type": "AuthError", "url": "https://api.ultimaker.com/clusters?status=active"}}]}'
2023-11-26 10:27:13,649 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestError [369]: request[73c9e738][get][PyQt6.QtCore.QUrl('https://api.ultimaker.com/cura-packages/v1/user/packages')][timeout=10][no-data] got an QNetworkReplyError Error transferring https://api.ultimaker.com/cura-packages/v1/user/packages - server replied: . The server returned: b'{"errors": [{"id": "c0c412ff-aa47-4341-98f0-9a161c42380c", "code": "tokenExpired", "http_status": "403", "title": "The given token has expired.", "detail": "Signature has expired", "meta": {"error_type": "AuthError", "url": "https://api.ultimaker.com/user/packages"}}]}'
2023-11-26 10:27:13,650 - WARNING - [MainThread] Marketplace.CloudSync.CloudPackageChecker._onUserPackagesRequestFinished [76]: Requesting user packages failed, response code 403 while trying to connect to PyQt6.QtCore.QUrl('https://api.ultimaker.com/cura-packages/v1/user/packages')
2023-11-26 10:27:14,068 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2695.8214950561523 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:27:14,072 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.refreshAccessToken [174]: Was already busy refreshing token. Do not start a new request.
2023-11-26 10:27:14,128 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestError [369]: request[7c9a7607][get][PyQt6.QtCore.QUrl('https://api.ultimaker.com/connect/v1/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status')][timeout=10][no-data] got an QNetworkReplyError Error transferring https://api.ultimaker.com/connect/v1/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status - server replied: . The server returned: b'{"errors": [{"id": "0e1a8a54-0f6c-4773-b96c-d42662445c5b", "code": "tokenExpired", "http_status": "403", "title": "The given token has expired.", "detail": "Signature has expired", "meta": {"error_type": "AuthError", "url": "https://api.ultimaker.com/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status"}}]}'
2023-11-26 10:27:16,069 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2697.8225331306458 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:27:18,070 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2699.8225090503693 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:27:20,069 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2701.8223621845245 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:27:22,069 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2703.8218188285828 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:27:24,069 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2705.8219771385193 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:27:24,077 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.refreshAccessToken [174]: Was already busy refreshing token. Do not start a new request.
2023-11-26 10:27:24,135 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestError [369]: request[0f3efad0][get][PyQt6.QtCore.QUrl('https://api.ultimaker.com/connect/v1/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status')][timeout=10][no-data] got an QNetworkReplyError Error transferring https://api.ultimaker.com/connect/v1/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status - server replied: . The server returned: b'{"errors": [{"id": "e1914fe0-8097-485f-a3e3-1e284ffce0d1", "code": "tokenExpired", "http_status": "403", "title": "The given token has expired.", "detail": "Signature has expired", "meta": {"error_type": "AuthError", "url": "https://api.ultimaker.com/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status"}}]}'
2023-11-26 10:27:26,068 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2707.8211948871613 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:27:28,069 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2709.821696996689 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:27:30,068 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2711.821105003357 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:27:32,067 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2713.8206458091736 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:27:34,069 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2715.8216791152954 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:27:34,076 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.refreshAccessToken [174]: Was already busy refreshing token. Do not start a new request.
2023-11-26 10:27:34,212 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestError [369]: request[1ba46fe3][get][PyQt6.QtCore.QUrl('https://api.ultimaker.com/connect/v1/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status')][timeout=10][no-data] got an QNetworkReplyError Error transferring https://api.ultimaker.com/connect/v1/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status - server replied: . The server returned: b'{"errors": [{"id": "f0400721-d131-4fd5-98e0-2f6d04d739c6", "code": "tokenExpired", "http_status": "403", "title": "The given token has expired.", "detail": "Signature has expired", "meta": {"error_type": "AuthError", "url": "https://api.ultimaker.com/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status"}}]}'
2023-11-26 10:27:36,069 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2717.821697950363 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:27:38,070 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2719.8226120471954 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:27:40,070 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2721.823217868805 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:27:42,068 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2723.821455001831 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:27:44,070 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2725.8219740390778 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:27:44,077 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.refreshAccessToken [174]: Was already busy refreshing token. Do not start a new request.
2023-11-26 10:27:44,134 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestError [369]: request[9623c920][get][PyQt6.QtCore.QUrl('https://api.ultimaker.com/connect/v1/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status')][timeout=10][no-data] got an QNetworkReplyError Error transferring https://api.ultimaker.com/connect/v1/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status - server replied: . The server returned: b'{"errors": [{"id": "fbbd37a1-c945-43c6-bb43-ccdd6526af91", "code": "tokenExpired", "http_status": "403", "title": "The given token has expired.", "detail": "Signature has expired", "meta": {"error_type": "AuthError", "url": "https://api.ultimaker.com/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status"}}]}'
2023-11-26 10:27:46,068 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2727.8210628032684 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:27:48,068 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2729.8213062286377 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:27:50,070 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2731.822179079056 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:27:52,070 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2733.822981119156 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:27:54,069 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2735.821669101715 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:27:56,069 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2737.822417974472 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:27:56,077 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.refreshAccessToken [174]: Was already busy refreshing token. Do not start a new request.
2023-11-26 10:27:56,270 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestError [369]: request[96d466e9][get][PyQt6.QtCore.QUrl('https://api.ultimaker.com/connect/v1/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status')][timeout=10][no-data] got an QNetworkReplyError Error transferring https://api.ultimaker.com/connect/v1/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status - server replied: . The server returned: b'{"errors": [{"id": "e8f2cd79-d4d6-4f11-b1b1-737529369fd7", "code": "tokenExpired", "http_status": "403", "title": "The given token has expired.", "detail": "Signature has expired", "meta": {"error_type": "AuthError", "url": "https://api.ultimaker.com/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status"}}]}'
2023-11-26 10:27:58,068 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2739.821543931961 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:28:00,068 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2741.821293115616 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:28:02,069 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2743.8222620487213 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:28:04,068 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2745.8206820487976 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:28:06,068 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2747.8209269046783 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:28:08,068 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2749.8206179142 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:28:08,075 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.refreshAccessToken [174]: Was already busy refreshing token. Do not start a new request.
2023-11-26 10:28:08,078 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestError [369]: request[221a80d1][get][PyQt6.QtCore.QUrl('https://api.ultimaker.com/connect/v1/clusters/HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7/status')][timeout=10][no-data] got an QNetworkReplyError Out of resources. The server returned: b''
2023-11-26 10:28:10,068 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2751.8210558891296 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:28:12,068 - DEBUG - [MainThread] UM3NetworkPrinting.src.UltimakerNetworkedPrinterOutputDevice._checkStillConnected [264]: It has been 2753.8209898471832 seconds since the last response for outputdevice HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7, so assume a timeout
2023-11-26 10:28:13,802 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.refreshAccessToken [174]: Was already busy refreshing token. Do not start a new request.
2023-11-26 10:28:13,807 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.refreshAccessToken [174]: Was already busy refreshing token. Do not start a new request.
2023-11-26 10:28:13,810 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.refreshAccessToken [174]: Was already busy refreshing token. Do not start a new request.
2023-11-26 10:58:52,087 - INFO - [MainThread] UM.Qt.QtApplication.__init__ [99]: Adding QT5 plugin path: /Applications/UltiMaker Cura.app/Contents/Resources/plugins
2023-11-26 10:58:52,087 - DEBUG - [MainThread] UM.Application.initialize [163]: Initializing UltiMaker Cura
2023-11-26 10:58:52,088 - DEBUG - [MainThread] UM.Application.initialize [164]: App Version 5.5.0
2023-11-26 10:58:52,088 - DEBUG - [MainThread] UM.Application.initialize [165]: Api Version 8.5.0
2023-11-26 10:58:52,088 - DEBUG - [MainThread] UM.Application.initialize [166]: Build type None
2023-11-26 10:58:52,088 - WARNING - [MainThread] UM.PluginRegistry.addPluginLocation [203]: Plugin location /Applications/UltiMaker Cura.app/Contents/lib/uranium must be a folder.
2023-11-26 10:58:52,088 - WARNING - [MainThread] UM.PluginRegistry.addPluginLocation [203]: Plugin location /Applications/UltiMaker Cura.app/Contents/lib64/uranium must be a folder.
2023-11-26 10:58:52,088 - WARNING - [MainThread] UM.PluginRegistry.addPluginLocation [203]: Plugin location /Applications/UltiMaker Cura.app/Contents/lib32/uranium must be a folder.
2023-11-26 10:58:52,088 - WARNING - [MainThread] UM.PluginRegistry.addPluginLocation [203]: Plugin location /Applications/UltiMaker Cura.app/Contents/MacOS/plugins must be a folder.
2023-11-26 10:58:52,088 - WARNING - [MainThread] UM.PluginRegistry.addPluginLocation [203]: Plugin location /Applications/UltiMaker Cura.app/Contents/Resources/uranium/plugins must be a folder.
2023-11-26 10:58:52,088 - WARNING - [MainThread] UM.PluginRegistry.addPluginLocation [203]: Plugin location /Applications/UltiMaker Cura.app/Contents/Resources/cura/plugins must be a folder.
2023-11-26 10:58:52,088 - DEBUG - [MainThread] UM.Resources.__initializeStoragePaths [481]: Initializing storage paths
2023-11-26 10:58:52,089 - DEBUG - [MainThread] UM.Resources.__initializeStoragePaths [491]: Config storage path is /Users/alberto/Library/Application Support/cura/5.5
2023-11-26 10:58:52,089 - DEBUG - [MainThread] UM.Resources.__initializeStoragePaths [499]: Data storage path is /Users/alberto/Library/Application Support/cura/5.5
2023-11-26 10:58:52,089 - DEBUG - [MainThread] UM.Resources.__initializeStoragePaths [511]: Cache storage path is /Users/alberto/Library/Application Support/cura/5.5/cache
2023-11-26 10:58:52,089 - INFO - [MainThread] UM.PackageManager.__init__ [56]: Found bundled packages JSON file: /Applications/UltiMaker Cura.app/Contents/MacOS/share/cura/resources/bundled_packages/cura.json
2023-11-26 10:58:52,089 - INFO - [MainThread] UM.PackageManager.__init__ [56]: Found bundled packages JSON file: /Applications/UltiMaker Cura.app/Contents/MacOS/share/cura/resources/bundled_packages/bundled_CuraEngineGradualFlow.json
2023-11-26 10:58:52,089 - INFO - [MainThread] UM.PackageManager.__init__ [56]: Found bundled packages JSON file: /Applications/UltiMaker Cura.app/Contents/MacOS/share/uranium/resources/bundled_packages/uranium.json
2023-11-26 10:58:52,089 - DEBUG - [MainThread] UM.View.GL.OpenGLContext.detectBestOpenGLVersion [124]: Trying OpenGL context 4.1...
2023-11-26 10:58:52,089 - DEBUG - [MainThread] UM.View.GL.OpenGLContext.detectBestOpenGLVersion [132]: Yay, we got at least OpenGL 4.1 core: 4.1 Core profile
2023-11-26 10:58:52,089 - DEBUG - [MainThread] UM.View.GL.OpenGLContext.detectBestOpenGLVersion [178]: OpenGL renderer type for this OpenGL version: AMD Radeon Pro 560 OpenGL Engine
2023-11-26 10:58:52,090 - DEBUG - [MainThread] UM.Qt.QtApplication.initialize [192]: Detected most suitable OpenGL context version: 4.1 Core profile
2023-11-26 10:58:52,090 - INFO - [MainThread] UM.Qt.QtApplication.initialize [199]: Initializing job queue ...
2023-11-26 10:58:52,090 - INFO - [MainThread] UM.Qt.QtApplication.initialize [203]: Initializing version upgrade manager ...
2023-11-26 10:58:52,090 - INFO - [MainThread] UM.PackageManager._loadManagementData [174]: Loaded bundled packages data from /Applications/UltiMaker Cura.app/Contents/MacOS/share/cura/resources/bundled_packages/cura.json
2023-11-26 10:58:52,090 - INFO - [MainThread] UM.PackageManager._loadManagementData [174]: Loaded bundled packages data from /Applications/UltiMaker Cura.app/Contents/MacOS/share/cura/resources/bundled_packages/bundled_CuraEngineGradualFlow.json
2023-11-26 10:58:52,090 - INFO - [MainThread] UM.PackageManager._loadManagementData [174]: Loaded bundled packages data from /Applications/UltiMaker Cura.app/Contents/MacOS/share/uranium/resources/bundled_packages/uranium.json
2023-11-26 10:58:52,090 - INFO - [MainThread] UM.PackageManager._loadManagementData [201]: Loaded user packages management file from /Users/alberto/Library/Application Support/cura/5.5/packages.json
2023-11-26 10:58:52,090 - INFO - [MainThread] UM.PackageManager._removeAllScheduledPackages [280]: Attempting to remove the following scheduled packages: - 
2023-11-26 10:58:52,090 - INFO - [MainThread] UM.PluginRegistry.initializeBeforePluginsAreLoaded [136]: Loading plugin configuration file '/Users/alberto/Library/Application Support/cura/5.5/plugins.json'
2023-11-26 10:58:52,090 - WARNING - [MainThread] UM.PluginRegistry.addPluginLocation [203]: Plugin location /Applications/UltiMaker Cura.app/Contents/lib/cura must be a folder.
2023-11-26 10:58:52,091 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [538]: Loaded plugin FileLogger 1.0.1
2023-11-26 10:58:52,099 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [538]: Loaded plugin SimpleView 1.0.1
2023-11-26 10:58:52,110 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [538]: Loaded plugin MachineSettingsAction 1.0.1
2023-11-26 10:58:52,121 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [538]: Loaded plugin ImageReader 1.0.1
2023-11-26 10:58:52,132 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [538]: Loaded plugin XRayView 1.0.1
2023-11-26 10:58:52,151 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [538]: Loaded plugin X3DReader 1.0.1
2023-11-26 10:58:52,161 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [538]: Loaded plugin CuraProfileReader 1.0.1
2023-11-26 10:58:52,172 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [538]: Loaded plugin PostProcessingPlugin 2.2.1
2023-11-26 10:58:52,266 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [538]: Loaded plugin UM3NetworkPrinting 2.0.0
2023-11-26 10:58:52,293 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [538]: Loaded plugin 3MFWriter 1.0.1
2023-11-26 10:58:52,308 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [538]: Loaded plugin CuraDrive 1.2.0
2023-11-26 10:58:52,318 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [538]: Loaded plugin SliceInfoPlugin 1.0.1
2023-11-26 10:58:52,332 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [538]: Loaded plugin UFPWriter 1.0.1
2023-11-26 10:58:52,379 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [538]: Loaded plugin DigitalLibrary 1.1.0
2023-11-26 10:58:52,391 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [538]: Loaded plugin GCodeProfileReader 1.0.1
2023-11-26 10:58:52,409 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [538]: Loaded plugin GCodeReader 1.0.1
2023-11-26 10:58:52,423 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [538]: Loaded plugin TrimeshReader 1.0.0
2023-11-26 10:58:52,431 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [538]: Loaded plugin UltimakerMachineActions 1.0.1
2023-11-26 10:58:52,439 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [538]: Loaded plugin GCodeGzReader 1.0.1
2023-11-26 10:58:52,478 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.getAccessToken [145]: No auth data to retrieve the access_token from
2023-11-26 10:58:52,479 - DEBUG - [MainThread] cura.UltimakerCloud.UltimakerCloudScope.requestHook [30]: User is not logged in for Cloud API request to https://api.ultimaker.com/cura-packages/v1/cura/v8.5.0/packages/package-updates?installed_packages=VertexDeltaPLA:1.4.0&installed_packages=GenericPVA:1.4.0&installed_packages=GenericCFFPA:1.4.0&installed_packages=GenericCPEPlus:1.4.0&installed_packages=PolyPlusPLA:1.0.1&installed_packages=UltimakerPC:1.4.0&installed_packages=GenericGFFCPE:1.4.0&installed_packages=eSUN_PETG_2019:2.2.0&installed_packages=UltimakerTPU:1.4.0&installed_packages=UltimakerPLA:1.4.0&installed_packages=FiberlogyHDPLA:1.0.1&installed_packages=PolyMaxPLA:1.0.1&installed_packages=UltimakerBAM:1.4.0&installed_packages=UltimakerNylon:1.4.0&installed_packages=GenericTPU:1.4.0&installed_packages=UltimakerPP:1.4.0&installed_packages=DagomaChromatikPLA:1.0.1&installed_packages=IMADE3DJellyBOXPETG:1.0.1&installed_packages=GenericPLA:1.4.0&installed_packages=GenericPETG:1.4.0&installed_packages=FABtotumABS:1.4.0&installed_packages=UltimakerCPE:1.4.0&installed_packages=GenericHIPS:1.4.0&installed_packages=PolyWoodPLA:1.0.1&installed_packages=VertexDeltaABS:1.4.0&installed_packages=GenericPP:1.4.0&installed_packages=GenericBAM:1.4.0&installed_packages=IMADE3DJellyBOXPLA:1.0.1&installed_packages=GenericABS:1.4.0&installed_packages=OctofiberPLA:1.0.1&installed_packages=UltimakerCPEP:1.4.0&installed_packages=UltimakerPVA:1.4.0&installed_packages=GenericNylon:1.4.0&installed_packages=GenericGFFPA:1.4.0&installed_packages=FABtotumNylon:1.4.0&installed_packages=PolyFlexPLA:1.0.1&installed_packages=VertexDeltaPET:1.4.0&installed_packages=GenericPC:1.4.0&installed_packages=Filo3DPLA:1.0.1&installed_packages=VertexDeltaTPU:1.4.0&installed_packages=FABtotumPLA:1.4.0&installed_packages=UltimakerABS:1.4.0&installed_packages=GenericCPE:1.4.0&installed_packages=SMARTFIL_HIPS:1.1.0&installed_packages=FABtotumTPU:1.4.0&installed_packages=UltimakerTPLA:1.4.0&installed_packages=GenericToughPLA:1.4.0&installed_packages=GenericCFFCPE:1.4.0&installed_packages=UM3NetworkPrinting:1.0.1&installed_packages=AMFReader:1.0.0&installed_packages=VersionUpgrade34to35:1.0.1&installed_packages=ScaleTool:1.0.1&installed_packages=STLWriter:1.0.1&installed_packages=VersionUpgrade22to24:1.0.1&installed_packages=SimulationView:1.0.1&installed_packages=VersionUpgrade44to45:1.0.0&installed_packages=MachineSettingsAction:1.0.1&installed_packages=DigitalLibrary:1.1.0&installed_packages=VersionUpgrade413to50:1.0.0&installed_packages=VersionUpgrade47to48:1.0.0&installed_packages=CuraDrive:1.2.0&installed_packages=MirrorTool:1.0.1&installed_packages=VersionUpgrade41to42:1.0.0&installed_packages=VersionUpgrade49to410:1.0.0&installed_packages=CuraProfileWriter:1.0.1&installed_packages=OBJReader:1.0.1&installed_packages=UpdateChecker:1.0.1&installed_packages=VersionUpgrade25to26:1.0.1&installed_packages=RemovableDriveOutputDevice:1.0.1&installed_packages=VersionUpgrade45to46:1.0.0&installed_packages=PostProcessingPlugin:2.2.1&installed_packages=GCodeProfileReader:1.0.1&installed_packages=VersionUpgrade460to462:1.0.0&installed_packages=VersionUpgrade40to41:1.0.1&installed_packages=UFPReader:1.0.0&installed_packages=SentryLogger:1.0.0&installed_packages=FirmwareUpdateChecker:1.0.1&installed_packages=GCodeGzReader:1.0.1&installed_packages=VersionUpgrade43to44:1.0.0&installed_packages=OBJWriter:1.0.1&installed_packages=UFPWriter:1.0.1&installed_packages=UltimakerMachineActions:1.0.1&installed_packages=VersionUpgrade35to40:1.0.0&installed_packages=X3DReader:1.0.1&installed_packages=VersionUpgrade30to31:1.0.1&installed_packages=CuraProfileReader:1.0.1&installed_packages=LegacyProfileReader:1.0.1&installed_packages=VersionUpgrade21to22:1.0.1&installed_packages=XRayView:1.0.1&installed_packages=GCodeReader:1.0.1&installed_packages=USBPrinting:1.0.2&installed_packages=CuraEngineGradualFlow:0.1.0&installed_packages=FirmwareUpdater:1.0.1&installed_packages=VersionUpgrade27to30:1.0.1&installed_packages=VersionUpgrade42to43:1.0.0&installed_packages=VersionUpgrade48to49:1.0.0&installed_packages=VersionUpgrade32to33:1.0.1&installed_packages=VersionUpgrade462to47:1.0.0&installed_packages=PerObjectSettingsTool:1.0.1&installed_packages=ImageReader:1.0.1&installed_packages=VersionUpgrade33to34:1.0.1&installed_packages=ModelChecker:1.0.1&installed_packages=VersionUpgrade411to412:1.0.0&installed_packages=SliceInfoPlugin:1.0.1&installed_packages=VersionUpgrade26to27:1.0.1&installed_packages=GCodeGzWriter:1.0.1&installed_packages=3MFReader:1.0.1&installed_packages=SupportEraser:1.0.1&installed_packages=TrimeshReader:1.0.0&installed_packages=VersionUpgrade52to53:1.0.0&installed_packages=RotateTool:1.0.1
2023-11-26 10:58:52,480 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [538]: Loaded plugin Marketplace 1.0.0
2023-11-26 10:58:52,494 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [538]: Loaded plugin CuraEngineGradualFlow 0.1.0
2023-11-26 10:58:52,504 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [538]: Loaded plugin RemovableDriveOutputDevice 1.0.1
2023-11-26 10:58:52,513 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [538]: Loaded plugin MonitorStage 1.0.1
2023-11-26 10:58:52,523 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [538]: Loaded plugin VersionUpgrade25to26 1.0.1
2023-11-26 10:58:52,530 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [538]: Loaded plugin VersionUpgrade26to27 1.0.1
2023-11-26 10:58:52,538 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [538]: Loaded plugin VersionUpgrade413to50 1.0.0
2023-11-26 10:58:52,547 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [538]: Loaded plugin VersionUpgrade48to49 1.0.0
2023-11-26 10:58:52,555 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [538]: Loaded plugin VersionUpgrade34to35 1.0.1
2023-11-26 10:58:52,567 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [538]: Loaded plugin VersionUpgrade44to45 1.0.0
2023-11-26 10:58:52,575 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [538]: Loaded plugin VersionUpgrade43to44 1.0.0
2023-11-26 10:58:52,583 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [538]: Loaded plugin VersionUpgrade32to33 1.0.1
2023-11-26 10:58:52,589 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [538]: Loaded plugin VersionUpgrade33to34 1.0.1
2023-11-26 10:58:52,597 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [538]: Loaded plugin VersionUpgrade41to42 1.0.0
2023-11-26 10:58:52,604 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [538]: Loaded plugin VersionUpgrade42to43 1.0.0
2023-11-26 10:58:52,616 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [538]: Loaded plugin VersionUpgrade462to47 1.0.0
2023-11-26 10:58:52,625 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [538]: Loaded plugin VersionUpgrade54to55 1.0.0
2023-11-26 10:58:52,634 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [538]: Loaded plugin VersionUpgrade52to53 1.0.0
2023-11-26 10:58:52,643 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [538]: Loaded plugin VersionUpgrade35to40 1.0.0
2023-11-26 10:58:52,651 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [538]: Loaded plugin VersionUpgrade22to24 1.0.1
2023-11-26 10:58:52,665 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [538]: Loaded plugin VersionUpgrade21to22 1.0.1
2023-11-26 10:58:52,673 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [538]: Loaded plugin VersionUpgrade53to54 1.0.0
2023-11-26 10:58:52,681 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [538]: Loaded plugin VersionUpgrade460to462 1.0.0
2023-11-26 10:58:52,688 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [538]: Loaded plugin VersionUpgrade47to48 1.0.0
2023-11-26 10:58:52,695 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [538]: Loaded plugin VersionUpgrade49to410 1.0.0
2023-11-26 10:58:52,702 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [538]: Loaded plugin VersionUpgrade45to46 1.0.0
2023-11-26 10:58:52,713 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [538]: Loaded plugin VersionUpgrade27to30 1.0.1
2023-11-26 10:58:52,721 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [538]: Loaded plugin VersionUpgrade30to31 1.0.1
2023-11-26 10:58:52,729 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [538]: Loaded plugin VersionUpgrade411to412 1.0.0
2023-11-26 10:58:52,739 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [538]: Loaded plugin VersionUpgrade40to41 1.0.1
2023-11-26 10:58:52,818 - INFO - [MainThread] CuraEngineBackend.CuraEngineBackend.__init__ [108]: Found CuraEngine at: /Applications/UltiMaker Cura.app/Contents/MacOS/CuraEngine
2023-11-26 10:58:52,819 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [538]: Loaded plugin CuraEngineBackend 1.0.1
2023-11-26 10:58:52,834 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [232]: Socket state changed to Listening
2023-11-26 10:58:52,843 - INFO - [MainThread] UM.Backend.Backend.startEngine [96]: Started engine process: /Applications/UltiMaker Cura.app/Contents/MacOS/CuraEngine
2023-11-26 10:58:52,843 - DEBUG - [MainThread] UM.Backend.Backend._backendLog [140]: [Backend] Calling engine with: ['/Applications/UltiMaker Cura.app/Contents/MacOS/CuraEngine', 'connect', '127.0.0.1:49674', '']
2023-11-26 10:58:52,873 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [538]: Loaded plugin 3MFReader 1.0.1
2023-11-26 10:58:52,884 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [538]: Loaded plugin PerObjectSettingsTool 1.0.1
2023-11-26 10:58:52,891 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] 
2023-11-26 10:58:52,892 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] Cura_SteamEngine version 5.5.0
2023-11-26 10:58:52,892 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] Copyright (C) 2023 Ultimaker
2023-11-26 10:58:52,903 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] 
2023-11-26 10:58:52,904 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] This program is free software: you can redistribute it and/or modify
2023-11-26 10:58:52,905 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] it under the terms of the GNU Affero General Public License as published by
2023-11-26 10:58:52,905 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] the Free Software Foundation, either version 3 of the License, or
2023-11-26 10:58:52,905 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] (at your option) any later version.
2023-11-26 10:58:52,906 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] 
2023-11-26 10:58:52,906 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] This program is distributed in the hope that it will be useful,
2023-11-26 10:58:52,907 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] but WITHOUT ANY WARRANTY; without even the implied warranty of
2023-11-26 10:58:52,907 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
2023-11-26 10:58:52,908 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] GNU Affero General Public License for more details.
2023-11-26 10:58:52,908 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] 
2023-11-26 10:58:52,908 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] You should have received a copy of the GNU Affero General Public License
2023-11-26 10:58:52,909 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] along with this program.  If not, see <http://www.gnu.org/licenses/>.
2023-11-26 10:58:52,910 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2023-11-26 10:58:52.890] [info] Connecting to 127.0.0.1:49674
2023-11-26 10:58:52,910 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [538]: Loaded plugin XmlMaterialProfile 1.0.1
2023-11-26 10:58:52,911 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [236]: Socket state changed to Connected
2023-11-26 10:58:52,911 - DEBUG - [MainThread] UM.Backend.Backend._onSocketStateChanged [225]: Backend connected on port 49674
2023-11-26 10:58:52,918 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [538]: Loaded plugin CuraProfileWriter 1.0.1
2023-11-26 10:58:52,925 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [538]: Loaded plugin ModelChecker 1.0.1
2023-11-26 10:58:52,953 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [538]: Loaded plugin USBPrinting 1.0.2
2023-11-26 10:58:52,962 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [538]: Loaded plugin PreviewStage 1.0.1
2023-11-26 10:58:52,971 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [538]: Loaded plugin GCodeWriter 1.0.1
2023-11-26 10:58:52,977 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [538]: Loaded plugin UFPReader 1.0.0
2023-11-26 10:58:52,986 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [538]: Loaded plugin FirmwareUpdater 1.0.1
2023-11-26 10:58:52,995 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [538]: Loaded plugin GCodeGzWriter 1.0.1
2023-11-26 10:58:52,995 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2023-11-26 10:58:52.995] [info] Connected to 127.0.0.1:49674
2023-11-26 10:58:53,018 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [538]: Loaded plugin SimulationView 1.0.1
2023-11-26 10:58:53,027 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [538]: Loaded plugin LegacyProfileReader 1.0.1
2023-11-26 10:58:53,035 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [538]: Loaded plugin AMFReader 1.0.0
2023-11-26 10:58:53,051 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [538]: Loaded plugin SolidView 1.0.1
2023-11-26 10:58:53,065 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [538]: Loaded plugin FirmwareUpdateChecker 1.0.1
2023-11-26 10:58:53,075 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [538]: Loaded plugin SupportEraser 1.0.1
2023-11-26 10:58:53,082 - INFO - [MainThread] UM.PluginRegistry.loadPlugin [538]: Loaded plugin PrepareStage 1.0.1
2023-11-26 10:58:53,087 - DEBUG - [MainThread] UM.PluginRegistry.loadPlugins [454]: Loading all plugins took 1.6931469440460205 seconds
2023-11-26 10:58:53,103 - INFO - [MainThread] UM.VersionUpgradeManager.upgrade [163]: Looking for old configuration files to upgrade.
2023-11-26 10:58:53,184 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [334]: Failed to get file version: ../smart+materials+3d_smartfil+hips.xml.fdm_material, skip it
2023-11-26 10:58:53,185 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [334]: Failed to get file version: ../eSUN_PETG.xml.fdm_material, skip it
2023-11-26 10:58:53,186 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [334]: Failed to get file version: ../eSUN_PETG_2019/eSUN PETG update 2021-06-25/eSUN_PETG.xml.fdm_material, skip it
2023-11-26 10:58:53,186 - WARNING - [MainThread] UM.VersionUpgradeManager._getUpgradeTasks [334]: Failed to get file version: ../SMARTFIL_HIPS/smart+materials+3d_smartfil+hips.xml.fdm_material, skip it
2023-11-26 10:58:53,201 - INFO - [MainThread] UM.VersionUpgradeManager.upgrade [177]: Checking and performing updates took 0.09875702857971191
2023-11-26 10:58:53,217 - INFO - [MainThread] UM.Qt.QtApplication.startSplashWindowPhase [266]: Completed loading preferences.
2023-11-26 10:58:53,228 - INFO - [MainThread] UM.Qt.QtApplication.startSplashWindowPhase [304]: Created system tray icon.
2023-11-26 10:58:55,357 - DEBUG - [MainThread] UM.Settings.ContainerRegistry.loadAllMetadata [565]: Loading metadata into container registry took 2.1114470958709717 seconds
2023-11-26 10:58:55,393 - DEBUG - [MainThread] cura.Scene.CuraSceneController.setActiveBuildPlate [142]: Selected build plate: 0
2023-11-26 10:58:55,397 - INFO - [MainThread] cura.CuraApplication._log_hardware_info [929]: System: Darwin
2023-11-26 10:58:55,397 - INFO - [MainThread] cura.CuraApplication._log_hardware_info [930]: Release: 22.6.0
2023-11-26 10:58:55,398 - INFO - [MainThread] cura.CuraApplication._log_hardware_info [931]: Version: Darwin Kernel Version 22.6.0: Wed Oct  4 21:25:26 PDT 2023; root:xnu-8796.141.3.701.17~4/RELEASE_X86_64
2023-11-26 10:58:55,413 - INFO - [MainThread] cura.CuraApplication._log_hardware_info [932]: Processor name: i386
2023-11-26 10:58:55,414 - INFO - [MainThread] cura.CuraApplication._log_hardware_info [933]: CPU Cores: 8
2023-11-26 10:58:55,414 - DEBUG - [MainThread] cura.CuraApplication.run [855]: Using Conan managed dependencies: cura/5.5.0#f33bbb7d4c852cd0df34a1b12c6038f7, boost/1.82.0#902463606663219fc8c6d2102f1b8c6a, curaengine_grpc_definitions/0.1.0#91fe2866ddff1ed1f742b15c7448851e, protobuf/3.21.9#515ceb0a1653cf84363d9968b812d6be, zlib/1.2.13#13c96f538b52e1600c40b88994de240f, asio-grpc/2.6.0#a53a448bd89332863dd7dc497c1190f7, grpc/1.50.1#41f20949b76f0ed2b816426375f0b52a, abseil/20220623.0#e182627de3e5bda7220302d5f69a37cd, c-ares/1.19.0#3d781213ee5d4736b3e5a0a040c22a92, openssl/1.1.1l#de73a8aad9d5a14da8ed43b40592195a, re2/20230301#94b1b4e643b4ea7878a1c75073a697a5, googleapis/cci.20221108#18441b49a9f5cf553d0d85b67c926df0, grpc-proto/cci.20220627#3ad14e3ffdae516b4da2407d5f23c71d, pyarcus/5.3.0#10e23195a57fca9807f6a5a7bb075c865de60059, arcus/5.3.0#c93fa068cb5b616a99e130bd4c0b11a3, cpython/3.10.4#b32bdcfcf86f4dca328f12e1faf40db7, expat/2.4.1#a36c94ae11100f2e3259a9edd4f77055, libffi/3.2.1#33b3eff20f1be5d569235ae100266729, mpdecimal/2.5.0#d8aaabf46cfa93efaadfe66733885102, libxcrypt/4.4.25#a6ab0080853010bf96ed0b9539412e7b, bzip2/1.0.8#b056f852bd2d5af96fc7171aadfd6c0b, gdbm/1.19#c420bc00f3cc629aef665fdc3100f926, sqlite3/3.36.0#d42a67cd9049135c9d299f26809c4be1, tk/8.6.10#52dd820e70534d4342fe6caec84beaff, tcl/8.6.10#aec77174134a121aaa59321674d1e893, ncurses/6.2#3c01887ed633bac7876b56419c791d6e, xz_utils/5.2.5#dd8565c00d13a3a6fb2f01214f73a076, curaengine/5.5.0#46e3c38ba4dc431623509b78370cce1c, clipper/6.4.2#4a99df8ff37476a0108cabee338a3cf2, rapidjson/1.1.0#219bf1ea2756b263575da26288753262, stb/20200203#cba8fa43f7a0ea5389896744664823c9, spdlog/1.10.0#6ef9a82ea41aaeb10e7736a99da3503e, fmt/9.0.0#f034bfca2ec6697aa58abd59923ded26, range-v3/0.12.0#ef25fe38953fd3847f5bf0dabe1df122, scripta/0.1.0@ultimaker/testing#49f6bea1a1bed833bfdfe695525044d7, neargye-semver/0.3.0#062aee0a7bf6c6aff702580ec695544a, pysavitar/5.3.0#2527fe9a8d353cf599bf8102c4a60cbc7b3a0d1c, savitar/5.3.0#e66e4e8f69e8764411d01b09140d04de8552552b, pugixml/1.12.1#5a39f82651eba3e7d6197903a3202e21, pynest2d/5.3.0#a44ffd40f4ad593091a9066589c0a1cf240275d5, nest2d/5.3.0#0e37a675ea212360daf2794541ad2c8b, nlopt/2.7.0#d928ab39fe3f6d91120c738b0de4751c, curaengine_plugin_gradual_flow/0.1.0#445f27841b8875113dc9cc996771a8d0, docopt.cpp/0.6.3#7937c6a7f2f8bccd86f67d25837f9a39, ctre/3.7.2#86bd3592feebcdafd2ab7b8a1aad0c80, uranium/5.5.0#8f29875ebd7cf8b9123645dbc7df0232, cura_binary_data/5.5.0#28d601dfcf3028bb362ed9af510369e2, fdm_materials/5.5.0
2023-11-26 10:58:55,415 - INFO - [MainThread] cura.CuraApplication.run [860]: Initializing machine error checker
2023-11-26 10:58:55,745 - WARNING - [MainThread] UM.Settings.SettingDefinition._deserialize_dict [668]: Unrecognised property comment in setting _plugin__curaenginegradualflow__0_1_0__max_flow_acceleration
2023-11-26 10:58:55,748 - INFO - [MainThread] cura.UI.MachineActionManager.addDefaultMachineActions [74]: Default machine actions added for machine definition [ultimaker_s5]
2023-11-26 10:58:55,795 - INFO - [MainThread] cura.Settings.GlobalStack.addExtruder [190]: Extruder[ultimaker_s5_extruder_left #4] added to [Albertos-Ultimaker #2] at position [0]
2023-11-26 10:58:55,796 - INFO - [MainThread] cura.Settings.GlobalStack.addExtruder [190]: Extruder[ultimaker_s5_extruder_right #4] added to [Albertos-Ultimaker #2] at position [1]
2023-11-26 10:58:57,015 - DEBUG - [MainThread] cura.Machines.ContainerTree.__getitem__ [120]: Adding container tree for ultimaker_s5 took 1.2073981761932373 seconds.
2023-11-26 10:58:57,026 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [212]: Begin loading of script: ChangeAtZ
2023-11-26 10:58:57,029 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [212]: Begin loading of script: ColorMix
2023-11-26 10:58:57,031 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [212]: Begin loading of script: CreateThumbnail
2023-11-26 10:58:57,033 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [212]: Begin loading of script: DisplayFilenameAndLayerOnLCD
2023-11-26 10:58:57,035 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [212]: Begin loading of script: DisplayProgressOnLCD
2023-11-26 10:58:57,037 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [212]: Begin loading of script: FilamentChange
2023-11-26 10:58:57,038 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [212]: Begin loading of script: InsertAtLayerChange
2023-11-26 10:58:57,042 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [212]: Begin loading of script: LimitXYAccelJerk
2023-11-26 10:58:57,046 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [212]: Begin loading of script: PauseAtHeight
2023-11-26 10:58:57,049 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [212]: Begin loading of script: RetractContinue
2023-11-26 10:58:57,050 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [212]: Begin loading of script: SearchAndReplace
2023-11-26 10:58:57,056 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [212]: Begin loading of script: Stretch
2023-11-26 10:58:57,059 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [212]: Begin loading of script: TimeLapse
2023-11-26 10:58:57,061 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin.loadScripts [212]: Begin loading of script: UsePreviousProbeMeasurements
2023-11-26 10:58:57,076 - WARNING - [MainThread] UM.Settings.InstanceContainer.setProperty [398]: Tried to set value of the setting material_max_flowrate, but it has no SettingInstance in this InstanceContainer Fast or its SettingDefinition Ultimaker S5
2023-11-26 10:58:57,090 - INFO - [MainThread] cura.CuraApplication.run [865]: Initializing machine manager
2023-11-26 10:58:57,090 - INFO - [MainThread] cura.CuraApplication.run [870]: Initializing container manager
2023-11-26 10:58:57,404 - WARNING - [MainThread] UM.Settings.SettingDefinition._deserialize_dict [668]: Unrecognised property comment in setting _plugin__curaenginegradualflow__0_1_0__max_flow_acceleration
2023-11-26 10:58:57,407 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.loadAuthDataFromPreferences [258]: Attempting to load the auth data from preferences.
2023-11-26 10:58:57,427 - INFO - [JobQueueWorker [0]] FirmwareUpdateChecker.FirmwareUpdateCheckerJob.run [93]: You have a(n) Ultimaker S5 in the printer list. Do firmware-check.
2023-11-26 10:58:57,436 - DEBUG - [MainThread] cura.OAuth2.AuthorizationHelpers.checkToken [115]: Checking the access token for [https://account.ultimaker.com/check-token]
2023-11-26 10:58:57,447 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._rescheduleCheck [164]: New error check scheduled.
2023-11-26 10:58:57,466 - WARNING - [MainThread] UM.OutputDevice.OutputDeviceManager.removeOutputDevice [235]: Could not find output device with id digital_factory to remove
2023-11-26 10:58:57,562 - INFO - [JobQueueWorker [0]] FirmwareUpdateChecker.FirmwareUpdateCheckerJob.run [109]: Reading firmware version of Ultimaker S5: checked = 8.2.0 - latest = 8.2.0
2023-11-26 10:58:57,615 - DEBUG - [MainThread] UM.TaskManagement.HttpRequestManager._onRequestError [369]: request[843f1668][get][PyQt6.QtCore.QUrl('https://account.ultimaker.com/check-token')][timeout=None][no-data] got an QNetworkReplyError Error transferring https://account.ultimaker.com/check-token - server replied: . The server returned: b'{"errors": [{"id": "5f86f3b1-24b1-49a3-b5b3-a2e041b45d6c", "code": "tokenExpired", "http_status": "403", "title": "The given token has expired.", "meta": {"error_type": "AuthError", "url": "https://account.ultimaker.com/check-token"}}]}'
2023-11-26 10:58:57,635 - DEBUG - [MainThread] cura.OAuth2.AuthorizationHelpers.getAccessTokenUsingRefreshToken [64]: Refreshing the access token for [https://account.ultimaker.com]
2023-11-26 10:58:57,681 - DEBUG - [MainThread] UM.Scene.Camera._preferencesChanged [255]: Changing perspective mode to perspective.
2023-11-26 10:58:57,816 - DEBUG - [MainThread] cura.PrinterOutput.NetworkedPrinterOutputDevice._createNetworkManager [323]: Creating network manager
2023-11-26 10:58:58,087 - DEBUG - [JobQueueWorker [1]] UM.Mesh.MeshData.calculateNormalsFromVertices [561]: Calculating normals took 0.07549786567687988 seconds
2023-11-26 10:58:58,269 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._storeAuthData [289]: Attempting to store the auth data for [https://account.ultimaker.com]
2023-11-26 10:58:58,273 - DEBUG - [MainThread] cura.OAuth2.AuthorizationHelpers.checkToken [115]: Checking the access token for [https://account.ultimaker.com/check-token]
2023-11-26 10:58:58,275 - DEBUG - [MainThread] cura.OAuth2.AuthorizationHelpers.checkToken [115]: Checking the access token for [https://account.ultimaker.com/check-token]
2023-11-26 10:58:58,351 - DEBUG - [MainThread] cura.API.Account._sync [236]: Starting a new sync while previous sync was not completed
2023-11-26 10:58:58,353 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.callback [271]: Auth data was successfully loaded
2023-11-26 10:58:58,692 - INFO - [MainThread] UM3NetworkPrinting.src.Cloud.CloudOutputDevice.connect [122]: Attempting to connect to cluster HPA4XDvAwHpIoA4W9p5fhLsaeHVCGuSQ6uH0rli-HzZ7
2023-11-26 10:58:58,702 - DEBUG - [MainThread] UM3NetworkPrinting.src.Cloud.CloudOutputDeviceManager._onGetRemoteClustersFinished [169]: Synced cloud printers with account.
2023-11-26 10:58:58,980 - INFO - [MainThread] cura.Machines.MachineErrorChecker._setResult [221]: Error check finished, result = False, time = 1.53s
2023-11-26 10:58:58,990 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [188]: Loading theme file: /Applications/UltiMaker Cura.app/Contents/MacOS/share/cura/resources/themes/cura-light/theme.json
2023-11-26 10:58:59,076 - DEBUG - [MainThread] UM.Qt.Bindings.Theme.load [323]: Loaded theme /Applications/UltiMaker Cura.app/Contents/MacOS/share/cura/resources/themes/cura-light
2023-11-26 10:58:59,077 - INFO - [MainThread] UM.Qt.Bindings.Theme.load [324]: System's em size is 13px.
2023-11-26 10:58:59,396 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin._createView [350]: Creating post processing plugin view.
2023-11-26 10:58:59,485 - DEBUG - [MainThread] PostProcessingPlugin.PostProcessingPlugin._createView [360]: Post processing view created.
2023-11-26 10:58:59,916 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2023-11-26 10:59:00,029 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2023-11-26 10:59:00,223 - DEBUG - [MainThread] UM.Controller.setActiveStage [180]: Setting active stage to PrepareStage
2023-11-26 10:59:00,259 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2023-11-26 10:59:00,389 - DEBUG - [MainThread] UM.Controller.setActiveView [108]: Setting active view to SolidView
2023-11-26 10:59:00,394 - DEBUG - [MainThread] SliceInfoPlugin.SliceInfo._createDialog [76]: Creating dialog [MoreInfoWindow.qml]
2023-11-26 10:59:00,416 - DEBUG - [MainThread] ModelChecker.ModelChecker._createView [118]: Creating model checker view.
2023-11-26 10:59:00,420 - DEBUG - [MainThread] ModelChecker.ModelChecker._createView [127]: Model checker view created.
2023-11-26 10:59:00,454 - DEBUG - [MainThread] cura.CuraApplication.run [911]: Booting Cura took 9.720449686050415 seconds
2023-11-26 10:59:00,454 - DEBUG - [JobQueueWorker [2]] cura.Machines.ContainerTree.run [174]: Started background loading of MachineNodes
2023-11-26 10:59:00,461 - DEBUG - [MainThread] cura.Machines.Models.IntentSelectionModel._update [73]: Updating IntentSelectionModel.
2023-11-26 10:59:00,477 - DEBUG - [MainThread] cura.Machines.Models.IntentSelectionModel._update [73]: Updating IntentSelectionModel.
2023-11-26 10:59:00,479 - DEBUG - [MainThread] cura.Machines.Models.IntentSelectionModel._update [73]: Updating IntentSelectionModel.
2023-11-26 10:59:00,529 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [33]: Updating CustomQualityProfilesDropDownMenuModel.
2023-11-26 10:59:00,780 - DEBUG - [MainThread] UM.Qt.QtRenderer._initialize [211]: Support for Vertex Array Objects: True
2023-11-26 10:59:00,832 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [121]: Initialized OpenGL subsystems.
2023-11-26 10:59:00,833 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [122]: OpenGL Version:  4.1 ATI-4.14.1
2023-11-26 10:59:00,833 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [123]: OpenGL Vendor:   ATI Technologies Inc.
2023-11-26 10:59:00,833 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [124]: OpenGL Renderer: AMD Radeon Pro 560 OpenGL Engine
2023-11-26 10:59:00,833 - DEBUG - [MainThread] UM.View.GL.OpenGL.__init__ [125]: GLSL Version:    4.10.0
2023-11-26 10:59:00,835 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [/Applications/UltiMaker Cura.app/Contents/MacOS/share/uranium/resources/shaders/default.shader]...
2023-11-26 10:59:00,842 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [/Applications/UltiMaker Cura.app/Contents/MacOS/share/uranium/resources/shaders/selection.shader]...
2023-11-26 10:59:00,846 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [/Applications/UltiMaker Cura.app/Contents/MacOS/share/uranium/resources/shaders/select_face.shader]...
2023-11-26 10:59:00,849 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [/Applications/UltiMaker Cura.app/Contents/MacOS/share/uranium/resources/shaders/default.shader]...
2023-11-26 10:59:00,853 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [/Applications/UltiMaker Cura.app/Contents/MacOS/share/uranium/resources/shaders/composite.shader]...
2023-11-26 10:59:00,858 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [/Applications/UltiMaker Cura.app/Contents/MacOS/share/cura/resources/shaders/overhang.shader]...
2023-11-26 10:59:00,862 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [/Applications/UltiMaker Cura.app/Contents/MacOS/share/cura/resources/shaders/striped.shader]...
2023-11-26 10:59:00,867 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [/Applications/UltiMaker Cura.app/Contents/MacOS/share/cura/resources/shaders/transparent_object.shader]...
2023-11-26 10:59:00,870 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [/Applications/UltiMaker Cura.app/Contents/MacOS/share/cura/resources/shaders/striped.shader]...
2023-11-26 10:59:00,874 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [/Applications/UltiMaker Cura.app/Contents/MacOS/share/cura/resources/shaders/xray.shader]...
2023-11-26 10:59:00,877 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [/Applications/UltiMaker Cura.app/Contents/MacOS/share/cura/resources/shaders/xray_composite.shader]...
2023-11-26 10:59:00,882 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [/Applications/UltiMaker Cura.app/Contents/MacOS/share/uranium/resources/shaders/default.shader]...
2023-11-26 10:59:00,885 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [/Applications/UltiMaker Cura.app/Contents/MacOS/share/cura/resources/shaders/grid.shader]...
2023-11-26 10:59:00,890 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [/Applications/UltiMaker Cura.app/Contents/MacOS/share/uranium/resources/shaders/platform.shader]...
2023-11-26 10:59:00,967 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [/Applications/UltiMaker Cura.app/Contents/MacOS/share/cura/resources/shaders/xray.shader]...
2023-11-26 10:59:01,158 - DEBUG - [MainThread] cura.Machines.Models.IntentSelectionModel._update [73]: Updating IntentSelectionModel.
2023-11-26 10:59:01,159 - DEBUG - [MainThread] cura.Machines.Models.IntentSelectionModel._update [73]: Updating IntentSelectionModel.
2023-11-26 10:59:01,165 - DEBUG - [MainThread] cura.Machines.Models.IntentSelectionModel._update [73]: Updating IntentSelectionModel.
2023-11-26 10:59:01,266 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [33]: Updating CustomQualityProfilesDropDownMenuModel.
2023-11-26 10:59:01,978 - DEBUG - [JobQueueWorker [2]] cura.Machines.ContainerTree.run [185]: All MachineNode loading completed
2023-11-26 10:59:05,305 - DEBUG - [MainThread] UM.Controller.setActiveStage [180]: Setting active stage to MonitorStage
2023-11-26 10:59:05,392 - WARNING - [MainThread] UM.Qt.Bindings.Theme.getSize [128]: No size icon defined in Theme
2023-11-26 10:59:05,393 - WARNING - [MainThread] UM.Qt.Bindings.Theme.getSize [128]: No size icon defined in Theme
2023-11-26 10:59:07,847 - WARNING - [MainThread] UM.Qt.Bindings.Theme.getSize [128]: No size icon defined in Theme
2023-11-26 10:59:07,847 - WARNING - [MainThread] UM.Qt.Bindings.Theme.getSize [128]: No size icon defined in Theme
2023-11-26 10:59:07,895 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [444]: file:///Applications/UltiMaker Cura.app/Contents/MacOS/share/cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobPreview.qml:24:9: QML QQuickImage: Failed to get image from provider: image://print_job_preview/1/52835845-2450-47e1-8f5f-27ee6d9a3028
2023-11-26 10:59:07,903 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [444]: file:///Applications/UltiMaker Cura.app/Contents/MacOS/share/cura/plugins/UM3NetworkPrinting/resources/qml/MonitorPrintJobPreview.qml:24:9: QML QQuickImage: Failed to get image from provider: image://print_job_preview/1/28ff916d-25fc-418a-a966-341e82b94f65
2023-11-26 10:59:15,446 - DEBUG - [MainThread] UM.Controller.setActiveStage [180]: Setting active stage to PreviewStage
2023-11-26 10:59:15,455 - DEBUG - [MainThread] UM.Controller.setActiveView [108]: Setting active view to SimulationView
2023-11-26 10:59:15,460 - DEBUG - [MainThread] UM.Mesh.MeshData.calculateNormalsFromVertices [561]: Calculating normals took 0.0006198883056640625 seconds
2023-11-26 10:59:15,463 - DEBUG - [MainThread] STLReader.STLReader._read [68]: Loaded a mesh with 12612 vertices
2023-11-26 10:59:15,465 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [/Applications/UltiMaker Cura.app/Contents/MacOS/share/cura/plugins/SimulationView/simulationview_composite.shader]...
2023-11-26 10:59:15,546 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [/Applications/UltiMaker Cura.app/Contents/MacOS/share/uranium/resources/shaders/color.shader]...
2023-11-26 10:59:15,552 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [/Applications/UltiMaker Cura.app/Contents/MacOS/share/cura/plugins/SimulationView/layers3d.shader]...
2023-11-26 10:59:15,567 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [/Applications/UltiMaker Cura.app/Contents/MacOS/share/cura/plugins/SimulationView/layers3d_shadow.shader]...
2023-11-26 10:59:15,576 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [/Applications/UltiMaker Cura.app/Contents/MacOS/share/uranium/resources/shaders/toolhandle.shader]...
2023-11-26 10:59:15,579 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [/Applications/UltiMaker Cura.app/Contents/MacOS/share/uranium/resources/shaders/color.shader]...
2023-11-26 10:59:15,582 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [/Applications/UltiMaker Cura.app/Contents/MacOS/share/cura/resources/shaders/striped.shader]...
2023-11-26 10:59:16,224 - DEBUG - [MainThread] UM.Controller.setActiveStage [180]: Setting active stage to PrepareStage
2023-11-26 10:59:16,225 - DEBUG - [MainThread] UM.Controller.setActiveView [108]: Setting active view to SolidView
2023-11-26 10:59:16,260 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2023-11-26 10:59:16,409 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [/Applications/UltiMaker Cura.app/Contents/MacOS/share/cura/resources/shaders/xray.shader]...
2023-11-26 10:59:16,968 - DEBUG - [MainThread] UM.Controller.setActiveStage [180]: Setting active stage to PreviewStage
2023-11-26 10:59:16,973 - DEBUG - [MainThread] UM.Controller.setActiveView [108]: Setting active view to SimulationView
2023-11-26 10:59:17,314 - DEBUG - [MainThread] cura.AutoSave._onTimeout [64]: Autosaving preferences, instances and profiles took 0.06081199645996094 seconds
2023-11-26 10:59:18,145 - DEBUG - [MainThread] UM.Controller.setActiveStage [180]: Setting active stage to PrepareStage
2023-11-26 10:59:18,145 - DEBUG - [MainThread] UM.Controller.setActiveView [108]: Setting active view to SolidView
2023-11-26 10:59:18,162 - DEBUG - [MainThread] cura.Machines.Models.NozzleModel._update [28]: Updating NozzleModel.
2023-11-26 10:59:18,306 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [/Applications/UltiMaker Cura.app/Contents/MacOS/share/cura/resources/shaders/xray.shader]...
2023-11-26 10:59:35,361 - INFO - [MainThread] cura.CuraApplication.readLocalFile [1824]: Attempting to read file file:///Users/alberto/Downloads/safe-box-3-digit-combination-model_files/Individual pieces/safe_dial_modified.stl
2023-11-26 10:59:35,376 - DEBUG - [JobQueueWorker [3]] UM.Mesh.MeshData.calculateNormalsFromVertices [561]: Calculating normals took 0.003386974334716797 seconds
2023-11-26 10:59:35,378 - DEBUG - [JobQueueWorker [3]] STLReader.STLReader._read [68]: Loaded a mesh with 65136 vertices
2023-11-26 10:59:35,416 - DEBUG - [JobQueueWorker [3]] UM.Mesh.MeshData.approximateConvexHull [505]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.03638601303100586 seconds. 538 input vertices. 538 output vertices.
2023-11-26 10:59:35,432 - DEBUG - [JobQueueWorker [3]] UM.FileHandler.ReadFileJob.run [83]: Loading file took 0.1 seconds
2023-11-26 10:59:35,454 - DEBUG - [JobQueueWorker [3]] UM.Mesh.MeshData.approximateConvexHull [505]: approximateConvexHull(target_count=1024) Calculating 3D convex hull took 0.02232813835144043 seconds. 538 input vertices. 538 output vertices.
2023-11-26 10:59:35,657 - DEBUG - [MainThread] UM.Operations.OperationStack.push [72]: <UM.Operations.AddSceneNodeOperation.AddSceneNodeOperation object at 0x1492df2b0>, took 1ms
2023-11-26 10:59:35,671 - DEBUG - [MainThread] UM.Operations.OperationStack.push [72]: GroupedOp.(#=2) RotateOp.(node=<CuraSceneNode object: 'safe_dial_modified.stl'>,rot.=Q<0.0,0.0,0.0,w=4.0>) TranslateOp.(node=<CuraSceneNode object: 'safe_dial_modified.stl'>,trans.=<0.000,0.000,0.000>), took 1ms
2023-11-26 10:59:35,889 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [/Applications/UltiMaker Cura.app/Contents/MacOS/share/cura/resources/shaders/transparent_object.shader]...
2023-11-26 10:59:38,538 - INFO - [MainThread] CuraEngineBackend.CuraEngineBackend._createSnapshot [320]: Creating thumbnail image (just before slice)...
2023-11-26 10:59:38,539 - DEBUG - [MainThread] UM.Scene.Camera._preferencesChanged [255]: Changing perspective mode to perspective.
2023-11-26 10:59:38,541 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [/Applications/UltiMaker Cura.app/Contents/MacOS/share/cura/resources/shaders/overhang.shader]...
2023-11-26 10:59:38,546 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [/Applications/UltiMaker Cura.app/Contents/MacOS/share/cura/resources/shaders/transparent_object.shader]...
2023-11-26 10:59:38,549 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [/Applications/UltiMaker Cura.app/Contents/MacOS/share/cura/resources/shaders/striped.shader]...
2023-11-26 10:59:38,998 - INFO - [MainThread] cura.BackendPlugin.start [77]: Starting backend_plugin [CuraEngineGradualFlow] with command: ['/Applications/UltiMaker Cura.app/Contents/Frameworks/curaengine_plugin_gradual_flow', '--address', '127.0.0.1', '--port', '55657']
2023-11-26 10:59:38,999 - INFO - [MainThread] cura.BackendPlugin.start [84]: Logging plugin output to: /Users/alberto/Library/Application Support/cura/5.5/CuraEngineGradualFlow.log
2023-11-26 10:59:39,011 - INFO - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [337]: Starting to slice...
2023-11-26 10:59:39,012 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [357]: Going to slice build plate [0]!
2023-11-26 10:59:39,720 - DEBUG - [MainThread] UM.Controller.setActiveStage [180]: Setting active stage to PreviewStage
2023-11-26 10:59:40,035 - DEBUG - [MainThread] UM.Controller.setActiveView [108]: Setting active view to SimulationView
2023-11-26 10:59:40,105 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onStartSliceCompleted [569]: Sending slice message took 1.093052864074707 seconds
2023-11-26 10:59:40,220 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2023-11-26 10:59:40.219] [info] Create local channel on port 55657.
2023-11-26 10:59:40,264 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2023-11-26 10:59:40.263] [info] All settings:  -s initial_extruder_nr="0" -s date="26-11-2023" -s print_temperature="200" -s material_brand="empty_brand" -s material_name="empty" -s speed_prime_tower="20" -s top_bottom_pattern="lines" -s acceleration_print_layer_0="1000" -s speed_travel="150" -s interlocking_beam_layer_count="2" -s support_tree_limit_branch_reach="True" -s command_line_settings="0" -s support_infill_extruder_nr="0" -s wipe_retraction_extra_prime_amount="0" -s jerk_skirt_brim="20" -s clean_between_layers="False" -s machine_shape="rectangular" -s coasting_speed="90" -s speed_wall_0_roofing="20" -s roofing_pattern="lines" -s skin_preshrink="0.8" -s speed_roofing="20" -s _plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size="0.2" -s raft_base_fan_speed="0" -s cool_min_layer_time="6" -s group_outer_walls="True" -s layer_0_z_overlap="0.125" -s machine_max_feedrate_e="45" -s prime_tower_brim_enable="False" -s raft_surface_thickness="0.2" -s machine_endstop_positive_direction_z="True" -s coasting_volume="0.064" -s raft_interface_fan_speed="50.0" -s raft_interface_jerk="50.0" -s material_shrinkage_percentage="100.2" -s support_interface_wall_count="1" -s support_interface_angles="[ ]" -s support_roof_density="100" -s raft_base_thickness="0.3" -s support_line_distance="0" -s retraction_enable="True" -s machine_heat_zone_length="16" -s support_skip_zag_per_mm="20" -s dual="0" -s support_bottom_enable="True" -s initial_layer_line_width_factor="100.0" -s machine_start_gcode="" -s machine_minimum_feedrate="0.0" -s ironing_line_spacing="0.1" -s speed_print_layer_0="20.0" -s wall_x_material_flow_layer_0="95.0" -s support_bottom_pattern="zigzag" -s quality_name="Fast" -s wall_0_material_flow_layer_0="110.00000000000001" -s roofing_extruder_nr="-1" -s cool_fan_full_layer="2" -s skirt_brim_extruder_nr="-1" -s top_skin_expand_distance="0.8" -s slicing_tolerance="middle" -s roofing_angles="[]" -s interlocking_depth="2" -s infill="0" -s wall_x_material_flow_roofing="100" -s acceleration_support="2000" -s prime_tower_line_width="0.4" -s jerk_wall_x_roofing="20" -s interlocking_orientation="22.5" -s brim_inside_margin="2.5" -s _plugin__curaenginegradualflow__0_1_0__reset_flow_duration="2.0" -s skirt_gap="3" -s machine_max_feedrate_z="40" -s machine_steps_per_mm_z="50" -s bridge_sparse_infill_max_density="0" -s wall_transition_angle="10" -s raft_base_jerk="50.0" -s mold_roof_height="0.5" -s jerk_travel_layer_0="20.0" -s skin_material_flow_layer_0="95" -s acceleration_support_interface="3500" -s adhesion_type="brim" -s jerk_enabled="True" -s meshfix_maximum_extrusion_area_deviation="50000" -s wall_0_material_flow="100" -s raft_fan_speed="0" -s support_bottom_wall_count="1" -s remove_empty_first_layers="True" -s jerk_topbottom="20" -s speed_travel_layer_0="150" -s jerk_wall_0_roofing="20" -s brim_smart_ordering="True" -s machine_height="300" -s travel_retract_before_outer_wall="False" -s support_bottom_height="0.4" -s magic_fuzzy_skin_enabled="False" -s support_bottom_line_width="0.4" -s material_flow_temp_graph="[[3.5, 200],[7.0, 240]]" -s machine_acceleration="3000" -s jerk_support_bottom="50.0" -s speed_wall_x_roofing="30" -s cool_fan_speed_min="50" -s wipe_move_distance="20" -s multiple_mesh_overlap="0" -s wipe_retraction_retract_speed="45" -s meshfix_maximum_travel_resolution="0.8" -s support_extruder_nr_layer_0="0" -s infill_sparse_thickness="0.2" -s ooze_shield_enabled="False" -s support_line_width="0.4" -s raft_surface_fan_speed="100" -s support_conical_angle="30" -s skirt_height="3" -s layer_height_0="0.2" -s machine_extruders_shared_nozzle_initial_retraction="0" -s material_adhesion_tendency="10" -s extruder_prime_pos_abs="True" -s mold_enabled="False" -s support_bottom_density="100" -s skin_material_flow="95.0" -s raft_base_line_width="0.8" -s alternate_carve_order="True" -s top_thickness="1" -s support_xy_distance_overhang="0.2" -s speed_support="30" -s machine_disallowed_areas="[]" -s travel_speed="150" -s speed="0" -s gradual_infill_step_height="1.5" -s magic_fuzzy_skin_point_density="1.25" -s z_seam_position="back" -s default_material_bed_temperature="60" -s expand_skins_expand_distance="0.8" -s magic_spiralize="False" -s bridge_skin_density_2="100" -s switch_extruder_extra_prime_amount="0" -s fill_outline_gaps="True" -s support_xy_overrides_z="z_overrides_xy" -s min_infill_area="0" -s machine_nozzle_tip_outer_diameter="1" -s hole_xy_offset_max_diameter="0" -s jerk_wall="20" -s material_print_temp_prepend="True" -s center_object="False" -s smooth_spiralized_contours="True" -s support_skip_some_zags="False" -s machine_feeder_wheel_diameter="10.0" -s bridge_skin_speed_2="20" -s speed_z_hop="10" -s material_break_speed="25" -s support_roof_line_width="0.4" -s ooze_shield_angle="60" -s machine_endstop_positive_direction_x="False" -s material_bed_temp_wait="True" -s raft_base_speed="15" -s support_angle="60" -s cooling="0" -s draft_shield_enabled="False" -s raft_interface_line_spacing="0.8" -s material_flush_purge_length="60" -s machine_nozzle_heat_up_speed="1.4" -s support_mesh_drop_down="True" -s support_bottom_line_distance="0.4" -s machine_head_with_fans_polygon="[[-41.4, -45.8], [-41.4, 36.0], [63.3, 36.0], [63.3, -45.8]]" -s z_seam_corner="z_seam_corner_none" -s machine_max_feedrate_x="300" -s machine_width="330" -s material_anti_ooze_retraction_speed="5" -s support_conical_enabled="False" -s acceleration_travel_enabled="False" -s support_tree_bp_diameter="7.5" -s magic_fuzzy_skin_outside_only="False" -s infill_line_width="0.4" -s support_structure="tree" -s machine_nozzle_temp_enabled="True" -s material_maximum_park_duration="300" -s skirt_brim_speed="20.0" -s switch_extruder_retraction_amount="8" -s material_type="empty" -s support_zag_skip_count="0" -s wipe_pause="0" -s wipe_retraction_prime_speed="45" -s acceleration_ironing="1000" -s prime_tower_flow="100" -s ironing_flow="10.0" -s infill_overlap="10" -s support_interface_material_flow="95.0" -s wipe_hop_speed="10" -s machine_heated_build_volume="True" -s bottom_skin_expand_distance="0.8" -s speed_wall="30" -s support_xy_distance="0.7" -s retraction_min_travel="5" -s acceleration_layer_0="1000" -s wipe_brush_pos_x="100" -s acceleration_travel_layer_0="1428.5714285714287" -s machine_nozzle_id="unknown" -s speed_equalize_flow_width_factor="110.0" -s support_tree_branch_reach_limit="30" -s xy_offset="-0.020000000000000004" -s retract_at_layer_change="False" -s wall_transition_length="0.4" -s mold_width="5" -s adhesion_extruder_nr="-1" -s skin_no_small_gaps_heuristic="False" -s raft_interface_layers="1" -s adaptive_layer_height_variation="0.1" -s cross_infill_density_image="" -s support_brim_line_count="3" -s cool_fan_speed_0="50" -s blackmagic="0" -s infill_support_enabled="False" -s raft_interface_acceleration="3500" -s raft_interface_extruder_nr="0" -s small_feature_speed_factor="50" -s zig_zaggify_infill="True" -s retraction_retract_speed="45" -s material_break_temperature="50" -s wipe_retraction_amount="6.5" -s cool_fan_enabled="True" -s cool_fan_speed_max="100" -s wall_overhang_angle="90" -s acceleration_wall="1500" -s ironing_enabled="False" -s acceleration_travel="5000" -s raft_base_extruder_nr="0" -s support_bottom_material_flow="95.0" -s extruder_prime_pos_x="0" -s layer_start_y="228.0" -s build_volume_temperature="28" -s minimum_support_area="0.0" -s skin_edge_support_layers="4" -s support_type="everywhere" -s small_skin_width="0.8" -s support_infill_angles="[ ]" -s shell="0" -s magic_mesh_surface_mode="normal" -s adaptive_layer_height_threshold="0.2" -s retraction_speed="45" -s speed_topbottom="20" -s lightning_infill_straightening_angle="40" -s raft_smoothing="5" -s interlocking_enable="False" -s cross_infill_pocket_size="6.0" -s support_tree_top_rate="30" -s wall_line_width_0="0.4" -s bridge_skin_support_threshold="50" -s support_bottom_stair_step_min_slope="10.0" -s wall_line_count="2" -s small_feature_speed_factor_0="50" -s experimental="0" -s bridge_wall_min_length="2.1" -s prime_tower_position_x="299.2" -s raft_interface_thickness="0.25" -s connect_infill_polygons="False" -s interlocking_boundary_avoidance="2" -s material_print_temperature="200" -s min_even_wall_line_width="0.34" -s switch_extruder_retraction_speed="20" -s raft_surface_extruder_nr="0" -s acceleration_roofing="1000" -s retraction_hop_enabled="True" -s material_print_temp_wait="True" -s support_roof_angles="[ ]" -s support_tower_roof_angle="0" -s extruder_prime_pos_z="0" -s acceleration_prime_tower="2000" -s retraction_hop_after_extruder_switch_height="2" -s support_enable="False" -s z_seam_y="240" -s infill_wipe_dist="0" -s bridge_skin_density_3="100" -s support_interface_enable="True" -s support_roof_wall_count="1" -s infill_sparse_density="20" -s infill_extruder_nr="-1" -s bridge_fan_speed="100" -s support_tree_max_diameter="25" -s support_material_flow="100" -s draft_shield_height="10" -s z_seam_x="165.0" -s retraction_combing_max_distance="15" -s machine_always_write_active_tool="False" -s resolution="0" -s support_tower_diameter="3.0" -s infill_support_angle="40" -s adaptive_layer_height_variation_step="0.01" -s raft_surface_jerk="50.0" -s quality_changes_name="empty" -s machine_nozzle_size="0.4" -s coasting_enable="False" -s support_interface_density="100" -s retraction_hop_only_when_collides="True" -s support_tree_branch_diameter="5" -s machine_steps_per_mm_y="50" -s support_roof_pattern="zigzag" -s support_mesh="False" -s brim_line_count="8" -s support_roof_line_distance="0.4" -s bridge_skin_density="80" -s cool_min_speed="4" -s z_seam_type="sharpest_corner" -s retraction_prime_speed="15" -s cool_min_layer_time_fan_speed_max="11" -s support_conical_min_width="5.0" -s skin_line_width="0.4" -s machine_max_acceleration_x="9000" -s speed_support_interface="30" -s bridge_skin_material_flow_2="95.0" -s z_seam_relative="False" -s cross_support_density_image="" -s material_crystallinity="False" -s support_bottom_distance="0.4" -s machine_steps_per_mm_e="1600" -s wall_thickness="0.8" -s prime_tower_position_y="209.2" -s mesh_position_x="0" -s infill_offset_x="0" -s small_skin_on_surface="False" -s raft_interface_line_width="0.6000000000000001" -s gantry_height="55" -s material_surface_energy="100" -s nozzle_offsetting_for_disallowed_areas="False" -s acceleration_skirt_brim="1000" -s meshfix="0" -s jerk_travel="20" -s retraction_extra_prime_amount="0" -s acceleration_wall_x="1500" -s flow_rate_extrusion_offset_factor="100" -s carve_multiple_volumes="True" -s material_extrusion_cool_down_speed="0.7" -s acceleration_wall_0_roofing="1500" -s machine_max_feedrate_y="300" -s support_roof_material_flow="95.0" -s cool_lift_head="False" -s machine_extruders_share_heater="False" -s speed_wall_0="20" -s machine_max_jerk_xy="20.0" -s cutting_mesh="False" -s conical_overhang_angle="50" -s mesh_position_z="0" -s infill_overlap_mm="0.04" -s support_bottom_stair_step_height="0" -s brim_outside_only="True" -s material_standby_temperature="100" -s wall_0_inset="0" -s relative_extrusion="False" -s min_bead_width="0.34" -s switch_extruder_prime_speed="15" -s wall_x_extruder_nr="-1" -s material_id="empty_material" -s retraction_count_max="25" -s skirt_line_count="1" -s conical_overhang_hole_size="0" -s jerk_travel_enabled="False" -s support_initial_layer_line_distance="0" -s meshfix_union_all="True" -s support_z_distance="0.4" -s support_bottom_offset="0.0" -s bridge_wall_speed="20" -s switch_extruder_retraction_speeds="20" -s machine_firmware_retract="False" -s raft_surface_acceleration="3500" -s machine_heated_bed="True" -s machine_use_extruder_offset_to_offset_coords="True" -s material_alternate_walls="False" -s material_end_of_filament_purge_length="20" -s acceleration_support_bottom="3500" -s material_break_preparation_speed="2" -s support_tree_min_height_to_model="3" -s support_interface_offset="0.0" -s machine_max_acceleration_y="9000" -s machine_max_acceleration_e="10000" -s speed_ironing="13.333333333333334" -s material_is_support_material="False" -s raft_acceleration="3500" -s machine_extruders_share_nozzle="False" -s bridge_fan_speed_3="50" -s ironing_inset="0.38" -s minimum_roof_area="1.0" -s machine_name="Ultimaker S5" -s jerk_print="20" -s material_no_load_move_factor="0.940860215" -s raft_surface_line_spacing="0.4" -s extruder_prime_pos_y="0" -s material_flow_layer_0="100" -s retraction_combing="no_outer_surfaces" -s wall_material_flow="100" -s raft_speed="15" -s mold_angle="40" -s xy_offset_layer_0="-0.1" -s adaptive_layer_height_enabled="False" -s support_connect_zigzags="True" -s print_bed_temperature="60" -s lightning_infill_support_angle="40" -s raft_margin="15" -s machine_max_jerk_e="5.0" -s small_feature_max_length="0.0" -s skin_overlap_mm="0.08" -s roofing_monotonic="True" -s bottom_thickness="1" -s roofing_material_flow="100" -s line_width="0.4" -s optimize_wall_printing_order="True" -s zig_zaggify_support="True" -s wipe_hop_enable="True" -s draft_shield_height_limitation="full" -s material_flush_purge_speed="0.5" -s wall_distribution_count="1" -s raft_airgap="0.25" -s travel_avoid_other_parts="True" -s machine_nozzle_cool_down_speed="0.8" -s roofing_line_width="0.4" -s material_anti_ooze_retracted_position="-4" -s jerk_print_layer_0="20" -s hole_xy_offset="0" -s support_interface_pattern="zigzag" -s initial_bottom_layers="5" -s bridge_skin_material_flow_3="95.0" -s bridge_fan_speed_2="50" -s material_bed_temperature_layer_0="60" -s support_infill_sparse_thickness="0.2" -s support_roof_height="0.4" -s acceleration_wall_x_roofing="1500" -s support_wall_count="1" -s machine_max_acceleration_z="100" -s skin_edge_support_thickness="0.8" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s bridge_enable_more_layers="False" -s support_bottom_extruder_nr="0" -s material_final_print_temperature="185" -s acceleration_wall_0="1500" -s support_interface_line_width="0.4" -s speed_support_roof="30" -s support_tree_angle_slow="40.0" -s support_bottom_angles="[ ]" -s coasting_min_volume="0.8" -s cool_fan_speed="50" -s top_bottom="0" -s prime_tower_enable="False" -s support_tree_angle="60" -s machine_max_jerk_z="0.4" -s infill_material_flow="100" -s ironing_monotonic="False" -s skirt_brim_line_width="0.4" -s support_infill_rate="0" -s cool_fan_full_at_height="0.2" -s support_brim_enable="True" -s acceleration_support_roof="3500" -s support_roof_offset="0.0" -s wall_0_extruder_nr="-1" -s machine_nozzle_expansion_angle="45" -s min_odd_wall_line_width="0.34" -s machine_gcode_flavor="Griffin" -s jerk_ironing="20" -s meshfix_maximum_deviation="0.04" -s mesh_position_y="0" -s infill_randomize_start_location="False" -s machine_nozzle_head_distance="3" -s support_brim_width="1.2000000000000002" -s speed_wall_x="30" -s time="10:59:39" -s machine_buildplate_type="glass" -s top_layers="5" -s raft_jerk="20" -s bridge_skin_speed_3="20" -s magic_fuzzy_skin_point_dist="0.8" -s speed_support_bottom="30" -s bridge_skin_material_flow="95.0" -s speed_support_infill="30" -s max_extrusion_before_wipe="10" -s raft_base_line_spacing="1.6" -s support_tower_maximum_supported_diameter="3.0" -s nozzle_disallowed_areas="[]" -s support_interface_extruder_nr="0" -s material_shrinkage_percentage_xy="100.2" -s jerk_support_interface="50.0" -s _plugin__curaenginegradualflow__0_1_0__max_flow_acceleration="1" -s interlocking_beam_width="0.8" -s support_tree_branch_diameter_angle="7" -s conical_overhang_enabled="False" -s min_skin_width_for_expansion="6.123233995736766e-17" -s wall_x_material_flow="100" -s support_pattern="zigzag" -s gradual_infill_steps="0" -s machine_show_variants="False" -s infill_mesh="False" -s layer_height="0.2" -s material_break_preparation_retracted_position="-16" -s wall_transition_filter_distance="100" -s bridge_wall_coast="0" -s wipe_retraction_speed="45" -s retraction_amount="6.5" -s material_break_retracted_position="-50" -s material_initial_print_temperature="190" -s jerk_wall_x="20" -s wall_line_width_x="0.4" -s jerk_support="50.0" -s machine_min_cool_heat_time_window="15" -s layer_start_x="330.0" -s infill_wall_line_count="0" -s support_supported_skin_fan_speed="100" -s brim_gap="0.15000000000000002" -s acceleration_support_infill="2000" -s travel="0" -s platform_adhesion="0" -s support_bottom_stair_step_width="5.0" -s jerk_roofing="20" -s wall_0_wipe_dist="0.2" -s skin_outline_count="1" -s jerk_prime_tower="20" -s raft_interface_speed="57.5" -s travel_avoid_distance="3" -s support_meshes_present="False" -s infill_multiplier="1" -s bottom_layers="5" -s infill_offset_y="0" -s magic_fuzzy_skin_thickness="0.3" -s meshfix_extensive_stitching="False" -s flow_rate_max_extrusion_offset="0" -s material_diameter="2.85" -s meshfix_union_all_remove_holes="False" -s alternate_extra_perimeter="False" -s support_roof_enable="True" -s top_bottom_pattern_0="lines" -s skin_monotonic="False" -s meshfix_keep_open_polygons="False" -s prime_blob_enable="False" -s support_tree_tip_diameter="0.8" -s meshfix_fluid_motion_small_distance="0.01" -s gradual_support_infill_steps="0" -s machine_depth="240" -s infill_before_walls="True" -s material="0" -s material_bed_temp_prepend="True" -s min_feature_size="0.1" -s material_flow="100" -s support_offset="0.0" -s top_bottom_extruder_nr="-1" -s lightning_infill_overhang_angle="40" -s ooze_shield_dist="2" -s material_end_of_filament_purge_speed="0.5" -s cool_min_temperature="190" -s jerk_layer_0="20" -s raft_surface_layers="2" -s skirt_brim_minimal_length="250" -s machine_endstop_positive_direction_y="False" -s minimum_bottom_area="1.0" -s infill_line_distance="6.0" -s material_shrinkage_percentage_z="100.1" -s material_guid="" -s bridge_wall_material_flow="100" -s support="0" -s infill_mesh_order="0" -s ironing_pattern="zigzag" -s raft_surface_line_width="0.4" -s lightning_infill_prune_angle="40" -s small_hole_max_size="0" -s wall_line_width="0.4" -s meshfix_fluid_motion_enabled="True" -s connect_skin_polygons="False" -s infill_pattern="triangles" -s speed_print="35" -s bottom_skin_preshrink="0.8" -s sub_div_rad_add="0.4" -s prime_tower_min_volume="6" -s support_tree_rest_preference="graceful" -s material_bed_temperature="60" -s draft_shield_dist="10" -s raft_surface_speed="100" -s speed_layer_0="20.0" -s infill_enable_travel_optimization="False" -s brim_replaces_support="True" -s bridge_skin_speed="20" -s skirt_brim_material_flow="100" -s wall_transition_filter_deviation="0.1" -s material_break_preparation_temperature="200" -s anti_overhang_mesh="False" -s wall_extruder_nr="-1" -s raft_base_acceleration="3500" -s retraction_extrusion_window="1" -s support_fan_enable="False" -s support_interface_height="0.4" -s minimum_interface_area="1.0" -s _plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled="False" -s extruders_enabled_count="2" -s machine_end_gcode="" -s machine_center_is_zero="False" -s support_top_distance="0.4" -s retraction_hop_after_extruder_switch="True" -s acceleration_enabled="True" -s support_roof_extruder_nr="0" -s wall_overhang_speed_factor="100" -s jerk_support_infill="50.0" -s raft_remove_inside_corners="False" -s ironing_only_highest_layer="False" -s acceleration_topbottom="1000" -s machine_settings="0" -s jerk_support_roof="50.0" -s machine_extruder_count="2" -s wall_0_material_flow_roofing="100" -s infill_angles="[ ]" -s travel_avoid_supports="False" -s acceleration_infill="3500" -s speed_slowdown_layers="1" -s default_material_print_temperature="200" -s roofing_layer_count="1" -s support_extruder_nr="0" -s acceleration_print="3500" -s meshfix_fluid_motion_angle="15" -s top_skin_preshrink="0.8" -s wipe_repeat_count="5" -s meshfix_maximum_resolution="0.5" -s gradual_support_infill_step_height="0.8" -s minimum_polygon_circumference="1.0" -s raft_base_wall_count="1" -s machine_scale_fan_speed_zero_to_one="False" -s skin_angles="[]" -s min_wall_line_width="0.34" -s bridge_settings_enabled="True" -s material_print_temperature_layer_0="200" -s support_use_towers="True" -s inset_direction="outside_in" -s prime_tower_size="20" -s machine_steps_per_mm_x="50" -s meshfix_fluid_motion_shift_distance="0.1" -s wipe_hop_amount="2" -s support_join_distance="2.0" -s print_sequence="all_at_once" -s skin_overlap="20" -s speed_infill="35" -s prime_tower_wipe_enabled="True" -s retraction_hop="2" -s jerk_wall_0="20" -s top_bottom_thickness="1" -s support_tree_max_diameter_increase_by_merges_when_support_to_model="1" -s jerk_infill="20" -s day="Sun" -s wipe_retraction_enable="True" -s support_interface_priority="interface_area_overwrite_support_area" -s support_interface_skip_height="0.2" -s max_skin_angle_for_expansion="90" -s brim_width="3" -s _plugin__curaenginegradualflow__0_1_0__layer_0_max_flow_acceleration="1" -e0 -s speed_prime_tower="30" -s top_bottom_pattern="lines" -s acceleration_print_layer_0="1500" -s speed_travel="150" -s support_tree_limit_branch_reach="True" -s command_line_settings="0" -s wipe_retraction_extra_prime_amount="0" -s jerk_skirt_brim="30" -s support_tree_rest_preference="graceful" -s support_roof_pattern="zigzag" -s clean_between_layers="False" -s coasting_speed="90" -s speed_wall_0_roofing="30" -s roofing_pattern="lines" -s skin_preshrink="0.8" -s top_bottom="0" -s speed_roofing="45" -s _plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size="0.2" -s raft_base_fan_speed="0" -s cool_min_layer_time="6" -s group_outer_walls="True" -s layer_0_z_overlap="0.125" -s initial_layer_line_width_factor="100.0" -s raft_surface_thickness="0.2" -s machine_endstop_positive_direction_z="True" -s coasting_volume="0.064" -s raft_interface_fan_speed="50.0" -s raft_interface_jerk="50.0" -s support_interface_wall_count="1" -s support_interface_angles="[ ]" -s support_roof_density="100" -s raft_base_thickness="0.3" -s conical_overhang_hole_size="0" -s support_line_distance="0" -s retraction_enable="True" -s machine_heat_zone_length="16" -s support_skip_zag_per_mm="20" -s dual="0" -s support_bottom_enable="True" -s meshfix_maximum_travel_resolution="0.8" -s ironing_line_spacing="0.1" -s speed_print_layer_0="45" -s wall_x_material_flow_layer_0="95.0" -s support_bottom_pattern="zigzag" -s wall_0_material_flow_layer_0="110.00000000000001" -s cool_fan_full_layer="2" -s top_skin_expand_distance="0.8" -s roofing_angles="[]" -s switch_extruder_retraction_speeds="20" -s infill="0" -s raft_interface_speed="57.5" -s travel_avoid_distance="3" -s wall_x_material_flow_roofing="100" -s acceleration_support="2000" -s prime_tower_line_width="0.4" -s jerk_wall_x_roofing="50.0" -s brim_inside_margin="2.5" -s _plugin__curaenginegradualflow__0_1_0__reset_flow_duration="2.0" -s skirt_gap="3" -s machine_steps_per_mm_z="50" -s bridge_sparse_infill_max_density="50" -s experimental="0" -s wall_transition_angle="10" -s raft_base_jerk="50.0" -s mold_roof_height="0.5" -s mold_width="5" -s jerk_travel_layer_0="30.0" -s skin_material_flow_layer_0="95" -s acceleration_support_interface="3500" -s meshfix_maximum_extrusion_area_deviation="50000" -s wall_0_material_flow="100" -s raft_fan_speed="0" -s machine_extruder_end_pos_x="330" -s support_bottom_wall_count="1" -s jerk_topbottom="50.0" -s speed_travel_layer_0="150" -s jerk_wall_0_roofing="30" -s magic_fuzzy_skin_enabled="False" -s support_bottom_line_width="0.4" -s jerk_support_bottom="50.0" -s wipe_move_distance="20" -s cool_fan_speed_min="100" -s extruder_prime_pos_z="2" -s support_tower_roof_angle="0" -s machine_extruder_start_pos_abs="True" -s machine_settings="0" -s acceleration_topbottom="3500" -s support_line_width="0.4" -s material_initial_print_temperature="195" -s material_break_retracted_position="-50" -s support_offset="0.0" -s material_flow="100" -s infill_sparse_thickness="0.2" -s machine_extruders_shared_nozzle_initial_retraction="0" -s extruder_prime_pos_abs="True" -s material_adhesion_tendency="0" -s material_standby_temperature="100" -s brim_outside_only="True" -s support_conical_angle="30" -s mold_enabled="False" -s top_thickness="1" -s support_xy_distance_overhang="0.2" -s support_xy_distance="0.7" -s speed_wall="100" -s speed="0" -s infill_overlap="10" -s support_interface_material_flow="95.0" -s extruder_nr="0" -s z_seam_position="back" -s skin_material_flow="95.0" -s support_bottom_density="100" -s acceleration_wall_x="3500" -s hole_xy_offset_max_diameter="0" -s jerk_wall="50.0" -s support_tower_maximum_supported_diameter="3.0" -s support_skip_some_zags="False" -s bridge_skin_speed_2="100" -s speed_z_hop="10" -s material_break_speed="25" -s cooling="0" -s material_flush_purge_length="60" -s raft_interface_line_spacing="0.8" -s machine_nozzle_heat_up_speed="1.9" -s support_bottom_line_distance="0.4" -s brim_smart_ordering="True" -s z_seam_corner="z_seam_corner_none" -s material_anti_ooze_retraction_speed="50" -s support_conical_enabled="False" -s support_tree_bp_diameter="7.5" -s magic_fuzzy_skin_outside_only="False" -s infill_line_width="0.4" -s machine_nozzle_temp_enabled="True" -s material_maximum_park_duration="7200" -s skirt_brim_speed="45" -s switch_extruder_retraction_amount="16" -s support_bottom_height="0.4" -s material_is_support_material="False" -s raft_acceleration="3500" -s fill_outline_gaps="True" -s support_zag_skip_count="0" -s wipe_pause="0" -s wipe_retraction_prime_speed="45" -s retraction_prime_speed="45" -s z_seam_type="back" -s acceleration_ironing="1000" -s prime_tower_flow="100" -s ironing_flow="10.0" -s bridge_skin_density_3="100" -s support_interface_enable="True" -s wipe_hop_speed="10" -s bottom_skin_expand_distance="0.8" -s inset_direction="outside_in" -s retraction_min_travel="0.8" -s acceleration_layer_0="1500" -s wipe_brush_pos_x="100" -s machine_nozzle_id="AA 0.4" -s acceleration_travel_layer_0="2142.8571428571427" -s speed_equalize_flow_width_factor="110.0" -s support_tree_branch_reach_limit="30" -s xy_offset="-0.020000000000000004" -s material_flow_temp_graph="[[3.5, 200],[7.0, 240]]" -s retract_at_layer_change="False" -s wall_transition_length="0.4" -s slicing_tolerance="middle" -s machine_extruder_end_pos_y="237" -s skin_no_small_gaps_heuristic="False" -s raft_interface_layers="1" -s cross_infill_density_image="" -s support_tree_max_diameter="25" -s bridge_fan_speed="100" -s support_material_flow="100" -s support_brim_line_count="3" -s cool_fan_speed_0="100" -s blackmagic="0" -s infill_support_enabled="False" -s prime_tower_min_volume="6" -s raft_surface_fan_speed="100" -s raft_interface_acceleration="3500" -s support_tree_branch_diameter="5" -s machine_steps_per_mm_y="50" -s small_feature_speed_factor="50" -s zig_zaggify_infill="True" -s retraction_retract_speed="45" -s material_break_temperature="60" -s wipe_retraction_amount="6.5" -s cool_fan_enabled="True" -s cool_fan_speed_max="100" -s wall_overhang_angle="90" -s acceleration_wall="3500" -s ironing_enabled="False" -s acceleration_travel="5000" -s support_bottom_material_flow="95.0" -s minimum_support_area="0.0" -s magic_mesh_surface_mode="normal" -s retraction_speed="45" -s speed_topbottom="100" -s lightning_infill_straightening_angle="40" -s raft_smoothing="5" -s cross_infill_pocket_size="5.333333333333333" -s support_tree_top_rate="30" -s wall_line_width_0="0.4" -s support_conical_min_width="5.0" -s bridge_skin_support_threshold="50" -s support_bottom_stair_step_min_slope="10.0" -s magic_fuzzy_skin_point_density="1.25" -s wall_line_count="2" -s small_feature_speed_factor_0="50" -s gradual_infill_steps="0" -s wipe_hop_enable="True" -s zig_zaggify_support="True" -s raft_interface_thickness="0.25" -s machine_extruder_start_code="" -s connect_infill_polygons="False" -s material_print_temperature="205" -s min_even_wall_line_width="0.34" -s switch_extruder_retraction_speed="20" -s acceleration_roofing="1500" -s retraction_hop_enabled="True" -s support_roof_angles="[ ]" -s acceleration_prime_tower="2000" -s machine_extruder_end_pos_abs="True" -s retraction_hop_after_extruder_switch_height="2" -s z_seam_y="120.0" -s speed_wall_x_roofing="45" -s infill_wipe_dist="0" -s resolution="0" -s bridge_skin_density_2="100" -s machine_extruder_start_pos_x="330" -s support_tower_diameter="3.0" -s infill_support_angle="40" -s raft_surface_jerk="50.0" -s machine_nozzle_size="0.4" -s coasting_enable="False" -s support_interface_density="100" -s machine_feeder_wheel_diameter="10.0" -s retraction_hop_only_when_collides="True" -s brim_line_count="18" -s support_roof_line_distance="0.4" -s machine_nozzle_offset_y="0" -s raft_base_line_width="0.8" -s bridge_skin_density="80" -s cool_min_speed="6" -s retraction_hop="2" -s jerk_wall_0="30" -s cool_min_layer_time_fan_speed_max="11" -s skin_line_width="0.4" -s speed_support_interface="30" -s bridge_skin_material_flow_2="95.0" -s material_anti_ooze_retracted_position="-4" -s jerk_print_layer_0="30" -s hole_xy_offset="0" -s support_interface_pattern="zigzag" -s initial_bottom_layers="5" -s bridge_skin_material_flow_3="95.0" -s bridge_fan_speed_2="100" -s roofing_line_width="0.4" -s material_crystallinity="False" -s support_bottom_distance="0.4" -s machine_steps_per_mm_e="1600" -s wall_thickness="0.8" -s expand_skins_expand_distance="0.8" -s mesh_position_x="0" -s roofing_material_flow="100" -s meshfix_fluid_motion_shift_distance="0.1" -s support_join_distance="2.0" -s wipe_hop_amount="2" -s wipe_retraction_enable="True" -s support_roof_height="0.4" -s support_infill_sparse_thickness="0.2" -s conical_overhang_angle="50" -s mesh_position_z="0" -s infill_overlap_mm="0.04" -s raft_surface_acceleration="3500" -s material_alternate_walls="False" -s material_end_of_filament_purge_length="20" -s acceleration_support_bottom="3500" -s material_break_preparation_speed="50" -s jerk_support_infill="50.0" -s wall_overhang_speed_factor="100" -s infill_before_walls="True" -s material="0" -s support_interface_skip_height="0.2" -s bridge_enable_more_layers="False" -s speed_ironing="20" -s small_skin_width="4" -s support_infill_angles="[ ]" -s shell="0" -s bridge_fan_speed_3="100" -s ironing_inset="0.38" -s machine_extruder_cooling_fan_number="0" -s minimum_roof_area="1.0" -s support_top_distance="0.4" -s retraction_hop_after_extruder_switch="True" -s jerk_print="50.0" -s support_connect_zigzags="True" -s xy_offset_layer_0="-0.1" -s material_no_load_move_factor="0.91" -s raft_surface_line_spacing="0.4" -s extruder_prime_pos_y="6" -s material_flow_layer_0="100" -s wall_material_flow="100" -s raft_speed="15" -s mold_angle="40" -s machine_extruder_end_code="" -s meshfix_maximum_deviation="0.04" -s meshfix_fluid_motion_small_distance="0.01" -s gradual_support_infill_steps="0" -s raft_surface_speed="100" -s infill_enable_travel_optimization="False" -s speed_layer_0="45" -s skin_edge_support_layers="4" -s retraction_extrusion_window="1" -s support_fan_enable="False" -s machine_extruder_start_pos_y="237" -s infill_offset_x="0" -s small_skin_on_surface="False" -s raft_interface_line_width="0.6000000000000001" -s material_surface_energy="100" -s lightning_infill_support_angle="40" -s small_feature_max_length="0.0" -s skin_overlap_mm="0.08" -s roofing_monotonic="True" -s bottom_thickness="1" -s switch_extruder_prime_speed="20" -s min_bead_width="0.34" -s line_width="0.4" -s optimize_wall_printing_order="False" -s material_flush_purge_speed="0.5" -s wall_distribution_count="1" -s raft_airgap="0.25" -s travel_avoid_other_parts="True" -s machine_nozzle_cool_down_speed="1.3" -s acceleration_wall_x_roofing="3500" -s gradual_infill_step_height="1.5" -s cool_lift_head="False" -s speed_wall_0="30" -s support_wall_count="1" -s skin_edge_support_thickness="0.8" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s machine_endstop_positive_direction_x="False" -s material_final_print_temperature="190" -s acceleration_wall_0="1500" -s support_interface_line_width="0.4" -s speed_support_roof="30" -s support_tree_angle_slow="40.0" -s support_bottom_angles="[ ]" -s infill_material_flow="100" -s ironing_monotonic="False" -s center_object="False" -s skirt_brim_line_width="0.4" -s infill_randomize_start_location="False" -s mesh_position_y="0" -s z_seam_x="0.0" -s retraction_combing_max_distance="15" -s support_infill_rate="0" -s cool_fan_full_at_height="0.2" -s support_brim_enable="True" -s acceleration_support_roof="3500" -s support_roof_offset="0.0" -s infill_line_distance="5.333333333333333" -s minimum_bottom_area="1.0" -s min_odd_wall_line_width="0.34" -s ironing_only_highest_layer="False" -s jerk_support_roof="50.0" -s wall_0_material_flow_roofing="100" -s support_supported_skin_fan_speed="100" -s infill_wall_line_count="0" -s jerk_roofing="30" -s machine_nozzle_head_distance="3" -s support_brim_width="1.2000000000000002" -s top_layers="5" -s raft_jerk="50.0" -s bridge_skin_speed_3="100" -s magic_fuzzy_skin_point_dist="0.8" -s min_skin_width_for_expansion="6.123233995736766e-17" -s wall_x_material_flow="100" -s lightning_infill_prune_angle="40" -s raft_surface_line_width="0.4" -s support_tree_angle="60" -s speed_support="30" -s jerk_support_interface="50.0" -s support_roof_wall_count="1" -s infill_sparse_density="15" -s support_bottom_stair_step_height="0" -s _plugin__curaenginegradualflow__0_1_0__max_flow_acceleration="2" -s speed_support_bottom="30" -s acceleration_wall_0_roofing="1500" -s material_extrusion_cool_down_speed="0.7" -s interlocking_beam_width="0.8" -s support_tree_branch_diameter_angle="7" -s conical_overhang_enabled="False" -s support_xy_overrides_z="z_overrides_xy" -s min_infill_area="0" -s machine_nozzle_tip_outer_diameter="1.0" -s support_pattern="zigzag" -s speed_print="100" -s material_break_preparation_retracted_position="-16" -s retraction_count_max="25" -s skirt_line_count="1" -s wall_transition_filter_distance="100" -s bridge_wall_coast="0" -s raft_margin="15" -s material_end_of_filament_purge_speed="0.5" -s wipe_retraction_speed="45" -s retraction_amount="6.5" -s min_wall_line_width="0.34" -s support="0" -s jerk_wall_x="50.0" -s wall_line_width_x="0.4" -s jerk_support="50.0" -s machine_min_cool_heat_time_window="15" -s layer_start_x="330.0" -s support_roof_line_width="0.4" -s brim_gap="0.15000000000000002" -s acceleration_support_infill="2000" -s travel="0" -s coasting_min_volume="0.8" -s cool_fan_speed="100" -s platform_adhesion="0" -s support_bottom_stair_step_width="5.0" -s support_roof_material_flow="95.0" -s speed_wall_x="100" -s min_feature_size="0.1" -s switch_extruder_extra_prime_amount="0" -s cool_min_temperature="195" -s jerk_layer_0="30" -s raft_surface_layers="2" -s skirt_brim_minimal_length="250" -s machine_endstop_positive_direction_y="False" -s material_guid="44a029e6-e31b-4c9e-a12f-9282e29a92ff" -s bridge_wall_material_flow="100" -s bridge_skin_material_flow="95.0" -s speed_support_infill="30" -s max_extrusion_before_wipe="10" -s raft_base_line_spacing="1.6" -s support_angle="60" -s raft_base_speed="15" -s ironing_pattern="zigzag" -s skin_monotonic="False" -s meshfix_keep_open_polygons="False" -s support_tree_tip_diameter="0.8" -s prime_blob_enable="False" -s small_hole_max_size="0" -s support_z_distance="0.4" -s meshfix_union_all="True" -s wall_line_width="0.4" -s bridge_wall_speed="30" -s support_bottom_offset="0.0" -s jerk_travel="50.0" -s skin_outline_count="1" -s jerk_prime_tower="50.0" -s bottom_skin_preshrink="0.8" -s sub_div_rad_add="0.4" -s support_initial_layer_line_distance="0" -s raft_base_acceleration="3500" -s support_interface_height="0.4" -s minimum_interface_area="1.0" -s _plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled="True" -s brim_replaces_support="True" -s bridge_skin_speed="30" -s skirt_brim_material_flow="100" -s meshfix_fluid_motion_enabled="True" -s infill_pattern="grid" -s connect_skin_polygons="False" -s wall_transition_filter_deviation="0.1" -s material_break_preparation_temperature="210" -s support_tree_min_height_to_model="3" -s meshfix="0" -s acceleration_skirt_brim="1500" -s support_interface_offset="0.0" -s infill_angles="[ ]" -s travel_avoid_supports="False" -s acceleration_infill="3500" -s default_material_print_temperature="200" -s roofing_layer_count="1" -s extruder_prime_pos_x="-3" -s layer_start_y="228.0" -s lightning_infill_overhang_angle="40" -s wall_0_wipe_dist="0.8" -s multiple_mesh_overlap="0" -s wipe_retraction_retract_speed="45" -s acceleration_print="3500" -s skirt_height="3" -s top_skin_preshrink="0.8" -s meshfix_fluid_motion_angle="15" -s wipe_repeat_count="5" -s meshfix_maximum_resolution="0.7" -s gradual_support_infill_step_height="0.8" -s machine_nozzle_offset_x="0" -s retraction_extra_prime_amount="0" -s machine_steps_per_mm_x="50" -s material_print_temperature_layer_0="205" -s support_use_towers="True" -s skin_angles="[]" -s skin_overlap="20" -s speed_infill="100" -s prime_tower_wipe_enabled="True" -s top_bottom_thickness="1" -s support_tree_max_diameter_increase_by_merges_when_support_to_model="1" -s jerk_infill="50.0" -s infill_multiplier="1" -s bottom_layers="5" -s infill_offset_y="0" -s magic_fuzzy_skin_thickness="0.3" -s meshfix_extensive_stitching="False" -s material_diameter="2.85" -s meshfix_union_all_remove_holes="False" -s alternate_extra_perimeter="False" -s support_roof_enable="True" -s top_bottom_pattern_0="lines" -s max_skin_angle_for_expansion="90" -s z_seam_relative="True" -s cross_support_density_image="" -s wall_0_inset="0" -s brim_width="7" -s _plugin__curaenginegradualflow__0_1_0__layer_0_max_flow_acceleration="2" -s jerk_ironing="50.0" -e1 -s speed_prime_tower="30" -s top_bottom_pattern="lines" -s acceleration_print_layer_0="1500" -s speed_travel="150" -s support_tree_limit_branch_reach="True" -s command_line_settings="0" -s wipe_retraction_extra_prime_amount="0" -s jerk_skirt_brim="30" -s support_tree_rest_preference="graceful" -s support_roof_pattern="zigzag" -s clean_between_layers="False" -s coasting_speed="90" -s speed_wall_0_roofing="30" -s roofing_pattern="lines" -s skin_preshrink="0.8" -s top_bottom="0" -s speed_roofing="45" -s _plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size="0.2" -s raft_base_fan_speed="0" -s cool_min_layer_time="6" -s group_outer_walls="True" -s layer_0_z_overlap="0.125" -s initial_layer_line_width_factor="100.0" -s raft_surface_thickness="0.2" -s machine_endstop_positive_direction_z="True" -s coasting_volume="0.064" -s raft_interface_fan_speed="50.0" -s raft_interface_jerk="50.0" -s support_interface_wall_count="1" -s support_interface_angles="[ ]" -s support_roof_density="100" -s raft_base_thickness="0.3" -s conical_overhang_hole_size="0" -s support_line_distance="0" -s retraction_enable="True" -s machine_heat_zone_length="16" -s support_skip_zag_per_mm="20" -s dual="0" -s support_bottom_enable="True" -s meshfix_maximum_travel_resolution="0.8" -s ironing_line_spacing="0.1" -s speed_print_layer_0="45" -s wall_x_material_flow_layer_0="95.0" -s support_bottom_pattern="zigzag" -s wall_0_material_flow_layer_0="110.00000000000001" -s cool_fan_full_layer="2" -s top_skin_expand_distance="0.8" -s roofing_angles="[]" -s switch_extruder_retraction_speeds="20" -s infill="0" -s raft_interface_speed="57.5" -s travel_avoid_distance="3" -s wall_x_material_flow_roofing="100" -s acceleration_support="2000" -s prime_tower_line_width="0.4" -s jerk_wall_x_roofing="50.0" -s brim_inside_margin="2.5" -s _plugin__curaenginegradualflow__0_1_0__reset_flow_duration="2.0" -s skirt_gap="3" -s machine_steps_per_mm_z="50" -s bridge_sparse_infill_max_density="50" -s experimental="0" -s wall_transition_angle="10" -s raft_base_jerk="50.0" -s mold_roof_height="0.5" -s mold_width="5" -s jerk_travel_layer_0="30.0" -s skin_material_flow_layer_0="95" -s acceleration_support_interface="3500" -s meshfix_maximum_extrusion_area_deviation="50000" -s wall_0_material_flow="100" -s raft_fan_speed="0" -s machine_extruder_end_pos_x="330" -s support_bottom_wall_count="1" -s jerk_topbottom="50.0" -s speed_travel_layer_0="150" -s jerk_wall_0_roofing="30" -s magic_fuzzy_skin_enabled="False" -s support_bottom_line_width="0.4" -s jerk_support_bottom="50.0" -s wipe_move_distance="20" -s cool_fan_speed_min="100" -s extruder_prime_pos_z="2" -s support_tower_roof_angle="0" -s machine_extruder_start_pos_abs="True" -s machine_settings="0" -s acceleration_topbottom="3500" -s support_line_width="0.4" -s material_initial_print_temperature="195" -s material_break_retracted_position="-50" -s support_offset="0.0" -s material_flow="100" -s infill_sparse_thickness="0.2" -s machine_extruders_shared_nozzle_initial_retraction="0" -s extruder_prime_pos_abs="True" -s material_adhesion_tendency="0" -s material_standby_temperature="100" -s brim_outside_only="True" -s support_conical_angle="30" -s mold_enabled="False" -s top_thickness="1" -s support_xy_distance_overhang="0.2" -s support_xy_distance="0.7" -s speed_wall="100" -s speed="0" -s infill_overlap="10" -s support_interface_material_flow="95.0" -s extruder_nr="1" -s z_seam_position="back" -s skin_material_flow="95.0" -s support_bottom_density="100" -s acceleration_wall_x="3500" -s hole_xy_offset_max_diameter="0" -s jerk_wall="50.0" -s support_tower_maximum_supported_diameter="3.0" -s support_skip_some_zags="False" -s bridge_skin_speed_2="100" -s speed_z_hop="10" -s material_break_speed="25" -s cooling="0" -s material_flush_purge_length="60" -s raft_interface_line_spacing="0.8" -s machine_nozzle_heat_up_speed="1.9" -s support_bottom_line_distance="0.4" -s brim_smart_ordering="True" -s z_seam_corner="z_seam_corner_none" -s material_anti_ooze_retraction_speed="50" -s support_conical_enabled="False" -s support_tree_bp_diameter="7.5" -s magic_fuzzy_skin_outside_only="False" -s infill_line_width="0.4" -s machine_nozzle_temp_enabled="True" -s material_maximum_park_duration="7200" -s skirt_brim_speed="45" -s switch_extruder_retraction_amount="16" -s support_bottom_height="0.4" -s material_is_support_material="False" -s raft_acceleration="3500" -s fill_outline_gaps="True" -s support_zag_skip_count="0" -s wipe_pause="0" -s wipe_retraction_prime_speed="45" -s retraction_prime_speed="45" -s z_seam_type="back" -s acceleration_ironing="1000" -s prime_tower_flow="100" -s ironing_flow="10.0" -s bridge_skin_density_3="100" -s support_interface_enable="True" -s wipe_hop_speed="10" -s bottom_skin_expand_distance="0.8" -s inset_direction="outside_in" -s retraction_min_travel="0.8" -s acceleration_layer_0="1500" -s wipe_brush_pos_x="100" -s machine_nozzle_id="AA 0.4" -s acceleration_travel_layer_0="2142.8571428571427" -s speed_equalize_flow_width_factor="110.0" -s support_tree_branch_reach_limit="30" -s xy_offset="-0.020000000000000004" -s material_flow_temp_graph="[[3.5, 200],[7.0, 240]]" -s retract_at_layer_change="False" -s wall_transition_length="0.4" -s slicing_tolerance="middle" -s machine_extruder_end_pos_y="219" -s skin_no_small_gaps_heuristic="False" -s raft_interface_layers="1" -s cross_infill_density_image="" -s support_tree_max_diameter="25" -s bridge_fan_speed="100" -s support_material_flow="100" -s support_brim_line_count="3" -s cool_fan_speed_0="100" -s blackmagic="0" -s infill_support_enabled="False" -s prime_tower_min_volume="6" -s raft_surface_fan_speed="100" -s raft_interface_acceleration="3500" -s support_tree_branch_diameter="5" -s machine_steps_per_mm_y="50" -s small_feature_speed_factor="50" -s zig_zaggify_infill="True" -s retraction_retract_speed="45" -s material_break_temperature="60" -s wipe_retraction_amount="6.5" -s cool_fan_enabled="True" -s cool_fan_speed_max="100" -s wall_overhang_angle="90" -s acceleration_wall="3500" -s ironing_enabled="False" -s acceleration_travel="5000" -s support_bottom_material_flow="95.0" -s minimum_support_area="0.0" -s magic_mesh_surface_mode="normal" -s retraction_speed="45" -s speed_topbottom="100" -s lightning_infill_straightening_angle="40" -s raft_smoothing="5" -s cross_infill_pocket_size="5.333333333333333" -s support_tree_top_rate="30" -s wall_line_width_0="0.4" -s support_conical_min_width="5.0" -s bridge_skin_support_threshold="50" -s support_bottom_stair_step_min_slope="10.0" -s magic_fuzzy_skin_point_density="1.25" -s wall_line_count="2" -s small_feature_speed_factor_0="50" -s gradual_infill_steps="0" -s wipe_hop_enable="True" -s zig_zaggify_support="True" -s raft_interface_thickness="0.25" -s machine_extruder_start_code="" -s connect_infill_polygons="False" -s material_print_temperature="205" -s min_even_wall_line_width="0.34" -s switch_extruder_retraction_speed="20" -s acceleration_roofing="1500" -s retraction_hop_enabled="True" -s support_roof_angles="[ ]" -s acceleration_prime_tower="2000" -s machine_extruder_end_pos_abs="True" -s retraction_hop_after_extruder_switch_height="2" -s z_seam_y="120.0" -s speed_wall_x_roofing="45" -s infill_wipe_dist="0" -s resolution="0" -s bridge_skin_density_2="100" -s machine_extruder_start_pos_x="330" -s support_tower_diameter="3.0" -s infill_support_angle="40" -s raft_surface_jerk="50.0" -s machine_nozzle_size="0.4" -s coasting_enable="False" -s support_interface_density="100" -s machine_feeder_wheel_diameter="10.0" -s retraction_hop_only_when_collides="True" -s brim_line_count="18" -s support_roof_line_distance="0.4" -s machine_nozzle_offset_y="0" -s raft_base_line_width="0.8" -s bridge_skin_density="80" -s cool_min_speed="6" -s retraction_hop="2" -s jerk_wall_0="30" -s cool_min_layer_time_fan_speed_max="11" -s skin_line_width="0.4" -s speed_support_interface="30" -s bridge_skin_material_flow_2="95.0" -s material_anti_ooze_retracted_position="-4" -s jerk_print_layer_0="30" -s hole_xy_offset="0" -s support_interface_pattern="zigzag" -s initial_bottom_layers="5" -s bridge_skin_material_flow_3="95.0" -s bridge_fan_speed_2="100" -s roofing_line_width="0.4" -s material_crystallinity="False" -s support_bottom_distance="0.4" -s machine_steps_per_mm_e="1600" -s wall_thickness="0.8" -s expand_skins_expand_distance="0.8" -s mesh_position_x="0" -s roofing_material_flow="100" -s meshfix_fluid_motion_shift_distance="0.1" -s support_join_distance="2.0" -s wipe_hop_amount="2" -s wipe_retraction_enable="True" -s support_roof_height="0.4" -s support_infill_sparse_thickness="0.2" -s conical_overhang_angle="50" -s mesh_position_z="0" -s infill_overlap_mm="0.04" -s raft_surface_acceleration="3500" -s material_alternate_walls="False" -s material_end_of_filament_purge_length="20" -s acceleration_support_bottom="3500" -s material_break_preparation_speed="50" -s jerk_support_infill="50.0" -s wall_overhang_speed_factor="100" -s infill_before_walls="True" -s material="0" -s support_interface_skip_height="0.2" -s bridge_enable_more_layers="False" -s speed_ironing="20" -s small_skin_width="4" -s support_infill_angles="[ ]" -s shell="0" -s bridge_fan_speed_3="100" -s ironing_inset="0.38" -s machine_extruder_cooling_fan_number="0" -s minimum_roof_area="1.0" -s support_top_distance="0.4" -s retraction_hop_after_extruder_switch="True" -s jerk_print="50.0" -s support_connect_zigzags="True" -s xy_offset_layer_0="-0.1" -s material_no_load_move_factor="0.91" -s raft_surface_line_spacing="0.4" -s extruder_prime_pos_y="6" -s material_flow_layer_0="100" -s wall_material_flow="100" -s raft_speed="15" -s mold_angle="40" -s machine_extruder_end_code="" -s meshfix_maximum_deviation="0.04" -s meshfix_fluid_motion_small_distance="0.01" -s gradual_support_infill_steps="0" -s raft_surface_speed="100" -s infill_enable_travel_optimization="False" -s speed_layer_0="45" -s skin_edge_support_layers="4" -s retraction_extrusion_window="1" -s support_fan_enable="False" -s machine_extruder_start_pos_y="219" -s infill_offset_x="0" -s small_skin_on_surface="False" -s raft_interface_line_width="0.6000000000000001" -s material_surface_energy="100" -s lightning_infill_support_angle="40" -s small_feature_max_length="0.0" -s skin_overlap_mm="0.08" -s roofing_monotonic="True" -s bottom_thickness="1" -s switch_extruder_prime_speed="20" -s min_bead_width="0.34" -s line_width="0.4" -s optimize_wall_printing_order="False" -s material_flush_purge_speed="0.5" -s wall_distribution_count="1" -s raft_airgap="0.25" -s travel_avoid_other_parts="True" -s machine_nozzle_cool_down_speed="1.3" -s acceleration_wall_x_roofing="3500" -s gradual_infill_step_height="1.5" -s cool_lift_head="False" -s speed_wall_0="30" -s support_wall_count="1" -s skin_edge_support_thickness="0.8" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s machine_endstop_positive_direction_x="False" -s material_final_print_temperature="190" -s acceleration_wall_0="1500" -s support_interface_line_width="0.4" -s speed_support_roof="30" -s support_tree_angle_slow="40.0" -s support_bottom_angles="[ ]" -s infill_material_flow="100" -s ironing_monotonic="False" -s center_object="False" -s skirt_brim_line_width="0.4" -s infill_randomize_start_location="False" -s mesh_position_y="0" -s z_seam_x="0.0" -s retraction_combing_max_distance="15" -s support_infill_rate="0" -s cool_fan_full_at_height="0.2" -s support_brim_enable="True" -s acceleration_support_roof="3500" -s support_roof_offset="0.0" -s infill_line_distance="5.333333333333333" -s minimum_bottom_area="1.0" -s min_odd_wall_line_width="0.34" -s ironing_only_highest_layer="False" -s jerk_support_roof="50.0" -s wall_0_material_flow_roofing="100" -s support_supported_skin_fan_speed="100" -s infill_wall_line_count="0" -s jerk_roofing="30" -s machine_nozzle_head_distance="3" -s support_brim_width="1.2000000000000002" -s top_layers="5" -s raft_jerk="50.0" -s bridge_skin_speed_3="100" -s magic_fuzzy_skin_point_dist="0.8" -s min_skin_width_for_expansion="6.123233995736766e-17" -s wall_x_material_flow="100" -s lightning_infill_prune_angle="40" -s raft_surface_line_width="0.4" -s support_tree_angle="60" -s speed_support="30" -s jerk_support_interface="50.0" -s support_roof_wall_count="1" -s infill_sparse_density="15" -s support_bottom_stair_step_height="0" -s _plugin__curaenginegradualflow__0_1_0__max_flow_acceleration="2" -s speed_support_bottom="30" -s acceleration_wall_0_roofing="1500" -s material_extrusion_cool_down_speed="0.7" -s interlocking_beam_width="0.8" -s support_tree_branch_diameter_angle="7" -s conical_overhang_enabled="False" -s support_xy_overrides_z="z_overrides_xy" -s min_infill_area="0" -s machine_nozzle_tip_outer_diameter="1.0" -s support_pattern="zigzag" -s speed_print="100" -s material_break_preparation_retracted_position="-16" -s retraction_count_max="25" -s skirt_line_count="1" -s wall_transition_filter_distance="100" -s bridge_wall_coast="0" -s raft_margin="15" -s material_end_of_filament_purge_speed="0.5" -s wipe_retraction_speed="45" -s retraction_amount="6.5" -s min_wall_line_width="0.34" -s support="0" -s jerk_wall_x="50.0" -s wall_line_width_x="0.4" -s jerk_support="50.0" -s machine_min_cool_heat_time_window="15" -s layer_start_x="330.0" -s support_roof_line_width="0.4" -s brim_gap="0.15000000000000002" -s acceleration_support_infill="2000" -s travel="0" -s coasting_min_volume="0.8" -s cool_fan_speed="100" -s platform_adhesion="0" -s support_bottom_stair_step_width="5.0" -s support_roof_material_flow="95.0" -s speed_wall_x="100" -s min_feature_size="0.1" -s switch_extruder_extra_prime_amount="0" -s cool_min_temperature="195" -s jerk_layer_0="30" -s raft_surface_layers="2" -s skirt_brim_minimal_length="250" -s machine_endstop_positive_direction_y="False" -s material_guid="44a029e6-e31b-4c9e-a12f-9282e29a92ff" -s bridge_wall_material_flow="100" -s bridge_skin_material_flow="95.0" -s speed_support_infill="30" -s max_extrusion_before_wipe="10" -s raft_base_line_spacing="1.6" -s support_angle="60" -s raft_base_speed="15" -s ironing_pattern="zigzag" -s skin_monotonic="False" -s meshfix_keep_open_polygons="False" -s support_tree_tip_diameter="0.8" -s prime_blob_enable="False" -s small_hole_max_size="0" -s support_z_distance="0.4" -s meshfix_union_all="True" -s wall_line_width="0.4" -s bridge_wall_speed="30" -s support_bottom_offset="0.0" -s jerk_travel="50.0" -s skin_outline_count="1" -s jerk_prime_tower="50.0" -s bottom_skin_preshrink="0.8" -s sub_div_rad_add="0.4" -s support_initial_layer_line_distance="0" -s raft_base_acceleration="3500" -s support_interface_height="0.4" -s minimum_interface_area="1.0" -s _plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled="True" -s brim_replaces_support="True" -s bridge_skin_speed="30" -s skirt_brim_material_flow="100" -s meshfix_fluid_motion_enabled="True" -s infill_pattern="grid" -s connect_skin_polygons="False" -s wall_transition_filter_deviation="0.1" -s material_break_preparation_temperature="210" -s support_tree_min_height_to_model="3" -s meshfix="0" -s acceleration_skirt_brim="1500" -s support_interface_offset="0.0" -s infill_angles="[ ]" -s travel_avoid_supports="False" -s acceleration_infill="3500" -s default_material_print_temperature="200" -s roofing_layer_count="1" -s extruder_prime_pos_x="333" -s layer_start_y="228.0" -s lightning_infill_overhang_angle="40" -s wall_0_wipe_dist="0.8" -s multiple_mesh_overlap="0" -s wipe_retraction_retract_speed="45" -s acceleration_print="3500" -s skirt_height="3" -s top_skin_preshrink="0.8" -s meshfix_fluid_motion_angle="15" -s wipe_repeat_count="5" -s meshfix_maximum_resolution="0.7" -s gradual_support_infill_step_height="0.8" -s machine_nozzle_offset_x="22" -s retraction_extra_prime_amount="0" -s machine_steps_per_mm_x="50" -s material_print_temperature_layer_0="205" -s support_use_towers="True" -s skin_angles="[]" -s skin_overlap="20" -s speed_infill="100" -s prime_tower_wipe_enabled="True" -s top_bottom_thickness="1" -s support_tree_max_diameter_increase_by_merges_when_support_to_model="1" -s jerk_infill="50.0" -s infill_multiplier="1" -s bottom_layers="5" -s infill_offset_y="0" -s magic_fuzzy_skin_thickness="0.3" -s meshfix_extensive_stitching="False" -s material_diameter="2.85" -s meshfix_union_all_remove_holes="False" -s alternate_extra_perimeter="False" -s support_roof_enable="True" -s top_bottom_pattern_0="lines" -s max_skin_angle_for_expansion="90" -s z_seam_relative="True" -s cross_support_density_image="" -s wall_0_inset="0" -s brim_width="7" -s _plugin__curaenginegradualflow__0_1_0__layer_0_max_flow_acceleration="2" -s jerk_ironing="50.0" -g -e0 -l "0" -s extruder_nr="0"
2023-11-26 10:59:40,264 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] 
2023-11-26 10:59:40,265 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2023-11-26 10:59:40.263] [info] Progress: start accomplished in 0.0004050731658935547s
2023-11-26 10:59:40,265 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2023-11-26 10:59:40.263] [info] Starting slice...
2023-11-26 10:59:40,265 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2023-11-26 10:59:40.263] [info] Slicing model...
2023-11-26 10:59:40,273 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2023-11-26 10:59:40.273] [info] Slice of mesh took 0.00879812240600586 seconds
2023-11-26 10:59:40,297 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2023-11-26 10:59:40.297] [info] Make polygons took 0.024090051651000977 seconds
2023-11-26 10:59:40,298 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2023-11-26 10:59:40.298] [info] Progress: slice accomplished in 0.03483700752258301s
2023-11-26 10:59:40,299 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2023-11-26 10:59:40.298] [info] Starting layerparts...
2023-11-26 10:59:40,323 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2023-11-26 10:59:40.318] [info] Progress: layerparts accomplished in 0.019479990005493164s
2023-11-26 10:59:40,325 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2023-11-26 10:59:40.318] [info] Starting inset+skin...
2023-11-26 10:59:41,489 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2023-11-26 10:59:41.489] [info] Progress: inset+skin accomplished in 1.171220064163208s
2023-11-26 10:59:41,490 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2023-11-26 10:59:41.489] [info] Starting support...
2023-11-26 10:59:41,610 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2023-11-26 10:59:41.609] [info] Progress: support accomplished in 0.12071490287780762s
2023-11-26 10:59:41,611 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2023-11-26 10:59:41.609] [info] Starting export...
2023-11-26 10:59:42,068 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2023-11-26 10:59:42.068] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints.
2023-11-26 10:59:44,286 - INFO - [MainThread] cura.Settings.IntentManager.selectIntent [157]: Attempting to set intent_category to [engineering] and quality type to [draft]
2023-11-26 10:59:44,294 - DEBUG - [MainThread] cura.BackendPlugin.stop [130]: EnginePlugin: CuraEngineGradualFlow was killed. Received return code -15
2023-11-26 10:59:44,295 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._terminate [410]: Attempting to kill the engine process
2023-11-26 10:59:44,295 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._terminate [416]: Killing engine process
2023-11-26 10:59:44,304 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._terminate [419]: Engine process is killed. Received return code -15
2023-11-26 10:59:44,305 - DEBUG - [MainThread] UM.Backend.Backend._createSocket [294]: Previous socket existed. Closing that first.
2023-11-26 10:59:44,325 - DEBUG - [MainThread] cura.Settings.MachineManager._updateIntentWithQuality [1318]: Updating intent due to quality change
2023-11-26 10:59:44,327 - DEBUG - [MainThread] cura.Machines.Models.IntentSelectionModel._update [73]: Updating IntentSelectionModel.
2023-11-26 10:59:44,330 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [232]: Socket state changed to Listening
2023-11-26 10:59:44,344 - INFO - [MainThread] UM.Backend.Backend.startEngine [96]: Started engine process: /Applications/UltiMaker Cura.app/Contents/MacOS/CuraEngine
2023-11-26 10:59:44,345 - DEBUG - [MainThread] UM.Backend.Backend._backendLog [140]: [Backend] Calling engine with: ['/Applications/UltiMaker Cura.app/Contents/MacOS/CuraEngine', 'connect', '127.0.0.1:49674', '']
2023-11-26 10:59:44,365 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] 
2023-11-26 10:59:44,365 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] Cura_SteamEngine version 5.5.0
2023-11-26 10:59:44,366 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] Copyright (C) 2023 Ultimaker
2023-11-26 10:59:44,366 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] 
2023-11-26 10:59:44,367 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] This program is free software: you can redistribute it and/or modify
2023-11-26 10:59:44,367 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] it under the terms of the GNU Affero General Public License as published by
2023-11-26 10:59:44,367 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] the Free Software Foundation, either version 3 of the License, or
2023-11-26 10:59:44,368 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] (at your option) any later version.
2023-11-26 10:59:44,368 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] 
2023-11-26 10:59:44,368 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] This program is distributed in the hope that it will be useful,
2023-11-26 10:59:44,369 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] but WITHOUT ANY WARRANTY; without even the implied warranty of
2023-11-26 10:59:44,369 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
2023-11-26 10:59:44,369 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] GNU Affero General Public License for more details.
2023-11-26 10:59:44,370 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] 
2023-11-26 10:59:44,370 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] You should have received a copy of the GNU Affero General Public License
2023-11-26 10:59:44,370 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] along with this program.  If not, see <http://www.gnu.org/licenses/>.
2023-11-26 10:59:44,370 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2023-11-26 10:59:44.362] [info] Connecting to 127.0.0.1:49674
2023-11-26 10:59:44,380 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [236]: Socket state changed to Connected
2023-11-26 10:59:44,381 - DEBUG - [MainThread] UM.Backend.Backend._onSocketStateChanged [225]: Backend connected on port 49674
2023-11-26 10:59:44,420 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._rescheduleCheck [164]: New error check scheduled.
2023-11-26 10:59:44,434 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [33]: Updating CustomQualityProfilesDropDownMenuModel.
2023-11-26 10:59:44,474 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2023-11-26 10:59:44.468] [info] Connected to 127.0.0.1:49674
2023-11-26 10:59:44,584 - DEBUG - [MainThread] cura.Machines.Models.IntentSelectionModel._update [73]: Updating IntentSelectionModel.
2023-11-26 10:59:44,585 - DEBUG - [MainThread] cura.Machines.Models.IntentSelectionModel._update [73]: Updating IntentSelectionModel.
2023-11-26 10:59:44,592 - DEBUG - [MainThread] cura.Machines.Models.IntentSelectionModel._update [73]: Updating IntentSelectionModel.
2023-11-26 10:59:44,739 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [33]: Updating CustomQualityProfilesDropDownMenuModel.
2023-11-26 10:59:45,892 - INFO - [MainThread] cura.Machines.MachineErrorChecker._setResult [221]: Error check finished, result = False, time = 1.47s
2023-11-26 10:59:47,275 - INFO - [MainThread] cura.Settings.IntentManager.selectIntent [157]: Attempting to set intent_category to [engineering] and quality type to [normal]
2023-11-26 10:59:47,294 - DEBUG - [MainThread] cura.Settings.MachineManager._updateIntentWithQuality [1318]: Updating intent due to quality change
2023-11-26 10:59:47,385 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [33]: Updating CustomQualityProfilesDropDownMenuModel.
2023-11-26 10:59:47,404 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._rescheduleCheck [164]: New error check scheduled.
2023-11-26 10:59:47,563 - DEBUG - [MainThread] cura.Machines.Models.IntentSelectionModel._update [73]: Updating IntentSelectionModel.
2023-11-26 10:59:47,564 - DEBUG - [MainThread] cura.Machines.Models.IntentSelectionModel._update [73]: Updating IntentSelectionModel.
2023-11-26 10:59:47,569 - DEBUG - [MainThread] cura.Machines.Models.IntentSelectionModel._update [73]: Updating IntentSelectionModel.
2023-11-26 10:59:47,706 - DEBUG - [MainThread] cura.Machines.Models.CustomQualityProfilesDropDownMenuModel._update [33]: Updating CustomQualityProfilesDropDownMenuModel.
2023-11-26 10:59:48,444 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._checkStack [168]: Need to check for errors again. Discard the current progress and reschedule a check.
2023-11-26 10:59:48,552 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._rescheduleCheck [164]: New error check scheduled.
2023-11-26 10:59:49,540 - INFO - [MainThread] cura.Machines.MachineErrorChecker._setResult [221]: Error check finished, result = False, time = 0.99s
2023-11-26 10:59:50,914 - DEBUG - [MainThread] cura.Machines.MachineErrorChecker._rescheduleCheck [164]: New error check scheduled.
2023-11-26 10:59:50,938 - INFO - [MainThread] cura.Machines.MachineErrorChecker._setResult [221]: Error check finished, result = False, time = 0.02s
2023-11-26 10:59:53,891 - INFO - [MainThread] CuraEngineBackend.CuraEngineBackend._createSnapshot [320]: Creating thumbnail image (just before slice)...
2023-11-26 10:59:53,893 - DEBUG - [MainThread] UM.Scene.Camera._preferencesChanged [255]: Changing perspective mode to perspective.
2023-11-26 10:59:53,895 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [/Applications/UltiMaker Cura.app/Contents/MacOS/share/cura/resources/shaders/overhang.shader]...
2023-11-26 10:59:53,900 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [/Applications/UltiMaker Cura.app/Contents/MacOS/share/cura/resources/shaders/transparent_object.shader]...
2023-11-26 10:59:53,903 - DEBUG - [MainThread] UM.View.GL.ShaderProgram.load [61]: Loading [/Applications/UltiMaker Cura.app/Contents/MacOS/share/cura/resources/shaders/striped.shader]...
2023-11-26 10:59:54,330 - INFO - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [337]: Starting to slice...
2023-11-26 10:59:54,330 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend.slice [357]: Going to slice build plate [0]!
2023-11-26 10:59:55,240 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onStartSliceCompleted [569]: Sending slice message took 0.909674882888794 seconds
2023-11-26 10:59:55,413 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2023-11-26 10:59:55.412] [info] All settings:  -s initial_extruder_nr="0" -s date="26-11-2023" -s print_temperature="200" -s material_brand="empty_brand" -s material_name="empty" -s speed_prime_tower="20" -s top_bottom_pattern="lines" -s acceleration_print_layer_0="1000" -s speed_travel="150" -s interlocking_beam_layer_count="2" -s support_tree_limit_branch_reach="True" -s command_line_settings="0" -s support_infill_extruder_nr="0" -s wipe_retraction_extra_prime_amount="0" -s jerk_skirt_brim="20" -s clean_between_layers="False" -s machine_shape="rectangular" -s coasting_speed="90" -s speed_wall_0_roofing="20" -s roofing_pattern="lines" -s skin_preshrink="0.8" -s speed_roofing="20" -s _plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size="0.2" -s raft_base_fan_speed="0" -s cool_min_layer_time="6" -s group_outer_walls="True" -s layer_0_z_overlap="0.125" -s machine_max_feedrate_e="45" -s prime_tower_brim_enable="False" -s raft_surface_thickness="0.1" -s machine_endstop_positive_direction_z="True" -s coasting_volume="0.064" -s raft_interface_fan_speed="50.0" -s raft_interface_jerk="30" -s material_shrinkage_percentage="100.2" -s support_interface_wall_count="1" -s support_interface_angles="[ ]" -s support_roof_density="100" -s raft_base_thickness="0.3" -s support_line_distance="0.5" -s retraction_enable="True" -s machine_heat_zone_length="16" -s support_skip_zag_per_mm="20" -s dual="0" -s support_bottom_enable="True" -s initial_layer_line_width_factor="100.0" -s machine_start_gcode="" -s machine_minimum_feedrate="0.0" -s ironing_line_spacing="0.1" -s speed_print_layer_0="10.0" -s wall_x_material_flow_layer_0="95.0" -s support_bottom_pattern="zigzag" -s quality_name="Fine" -s wall_0_material_flow_layer_0="110.00000000000001" -s roofing_extruder_nr="-1" -s cool_fan_full_layer="2" -s skirt_brim_extruder_nr="-1" -s top_skin_expand_distance="0.8" -s slicing_tolerance="middle" -s roofing_angles="[]" -s interlocking_depth="2" -s infill="0" -s wall_x_material_flow_roofing="100" -s acceleration_support="2000" -s prime_tower_line_width="0.4" -s jerk_wall_x_roofing="20" -s interlocking_orientation="22.5" -s brim_inside_margin="2.5" -s _plugin__curaenginegradualflow__0_1_0__reset_flow_duration="2.0" -s skirt_gap="3" -s machine_max_feedrate_z="40" -s machine_steps_per_mm_z="50" -s bridge_sparse_infill_max_density="0" -s wall_transition_angle="10" -s raft_base_jerk="30" -s mold_roof_height="0.5" -s jerk_travel_layer_0="20.0" -s skin_material_flow_layer_0="95" -s acceleration_support_interface="1000" -s adhesion_type="brim" -s jerk_enabled="True" -s meshfix_maximum_extrusion_area_deviation="50000" -s wall_0_material_flow="100" -s raft_fan_speed="0" -s support_bottom_wall_count="1" -s remove_empty_first_layers="True" -s jerk_topbottom="20" -s speed_travel_layer_0="150" -s jerk_wall_0_roofing="20" -s brim_smart_ordering="True" -s machine_height="300" -s travel_retract_before_outer_wall="False" -s support_bottom_height="0.2" -s magic_fuzzy_skin_enabled="False" -s support_bottom_line_width="0.4" -s material_flow_temp_graph="[[3.5, 200],[7.0, 240]]" -s machine_acceleration="3000" -s jerk_support_bottom="30" -s speed_wall_x_roofing="30" -s cool_fan_speed_min="50" -s wipe_move_distance="20" -s multiple_mesh_overlap="0" -s wipe_retraction_retract_speed="45" -s meshfix_maximum_travel_resolution="0.8" -s support_extruder_nr_layer_0="0" -s infill_sparse_thickness="0.1" -s ooze_shield_enabled="False" -s support_line_width="0.4" -s raft_surface_fan_speed="100" -s support_conical_angle="30" -s skirt_height="3" -s layer_height_0="0.2" -s machine_extruders_shared_nozzle_initial_retraction="0" -s material_adhesion_tendency="10" -s extruder_prime_pos_abs="True" -s mold_enabled="False" -s support_bottom_density="100" -s skin_material_flow="95.0" -s raft_base_line_width="0.8" -s alternate_carve_order="True" -s top_thickness="1" -s support_xy_distance_overhang="0.2" -s speed_support="30" -s machine_disallowed_areas="[]" -s travel_speed="150" -s speed="0" -s gradual_infill_step_height="1.5" -s magic_fuzzy_skin_point_density="1.25" -s z_seam_position="back" -s default_material_bed_temperature="60" -s expand_skins_expand_distance="0.8" -s magic_spiralize="False" -s bridge_skin_density_2="100" -s switch_extruder_extra_prime_amount="0" -s fill_outline_gaps="True" -s support_xy_overrides_z="z_overrides_xy" -s min_infill_area="0" -s machine_nozzle_tip_outer_diameter="1" -s hole_xy_offset_max_diameter="0" -s jerk_wall="20" -s material_print_temp_prepend="True" -s center_object="False" -s smooth_spiralized_contours="True" -s support_skip_some_zags="False" -s machine_feeder_wheel_diameter="10.0" -s bridge_skin_speed_2="20" -s speed_z_hop="10" -s material_break_speed="25" -s support_roof_line_width="0.4" -s ooze_shield_angle="60" -s machine_endstop_positive_direction_x="False" -s material_bed_temp_wait="True" -s raft_base_speed="15" -s support_angle="60" -s cooling="0" -s draft_shield_enabled="False" -s raft_interface_line_spacing="0.8" -s material_flush_purge_length="60" -s machine_nozzle_heat_up_speed="1.4" -s support_mesh_drop_down="True" -s support_bottom_line_distance="0.4" -s machine_head_with_fans_polygon="[[-41.4, -45.8], [-41.4, 36.0], [63.3, 36.0], [63.3, -45.8]]" -s z_seam_corner="z_seam_corner_none" -s machine_max_feedrate_x="300" -s machine_width="330" -s material_anti_ooze_retraction_speed="5" -s support_conical_enabled="False" -s acceleration_travel_enabled="False" -s support_tree_bp_diameter="7.5" -s magic_fuzzy_skin_outside_only="False" -s infill_line_width="0.4" -s support_structure="normal" -s machine_nozzle_temp_enabled="True" -s material_maximum_park_duration="300" -s skirt_brim_speed="10.0" -s switch_extruder_retraction_amount="8" -s material_type="empty" -s support_zag_skip_count="40" -s wipe_pause="0" -s wipe_retraction_prime_speed="45" -s acceleration_ironing="1000" -s prime_tower_flow="100" -s ironing_flow="10.0" -s infill_overlap="10" -s support_interface_material_flow="95.0" -s wipe_hop_speed="10" -s machine_heated_build_volume="True" -s bottom_skin_expand_distance="0.8" -s speed_wall="30" -s support_xy_distance="0.7" -s retraction_min_travel="5" -s acceleration_layer_0="1000" -s wipe_brush_pos_x="100" -s acceleration_travel_layer_0="1428.5714285714287" -s machine_nozzle_id="unknown" -s speed_equalize_flow_width_factor="110.0" -s support_tree_branch_reach_limit="30" -s xy_offset="-0.010000000000000002" -s retract_at_layer_change="False" -s wall_transition_length="0.4" -s mold_width="5" -s adhesion_extruder_nr="-1" -s skin_no_small_gaps_heuristic="False" -s raft_interface_layers="1" -s adaptive_layer_height_variation="0.1" -s cross_infill_density_image="" -s support_brim_line_count="3" -s cool_fan_speed_0="50" -s blackmagic="0" -s infill_support_enabled="False" -s raft_interface_acceleration="3500" -s raft_interface_extruder_nr="0" -s small_feature_speed_factor="50" -s zig_zaggify_infill="True" -s retraction_retract_speed="45" -s material_break_temperature="50" -s wipe_retraction_amount="6.5" -s cool_fan_enabled="True" -s cool_fan_speed_max="100" -s wall_overhang_angle="90" -s acceleration_wall="1500" -s ironing_enabled="False" -s acceleration_travel="5000" -s raft_base_extruder_nr="0" -s support_bottom_material_flow="95.0" -s extruder_prime_pos_x="0" -s layer_start_y="228.0" -s build_volume_temperature="28" -s minimum_support_area="0.0" -s skin_edge_support_layers="4" -s support_type="everywhere" -s small_skin_width="0.8" -s support_infill_angles="[ ]" -s shell="0" -s magic_mesh_surface_mode="normal" -s adaptive_layer_height_threshold="0.2" -s retraction_speed="45" -s speed_topbottom="20" -s lightning_infill_straightening_angle="40" -s raft_smoothing="5" -s interlocking_enable="False" -s cross_infill_pocket_size="6.0" -s support_tree_top_rate="30" -s wall_line_width_0="0.4" -s bridge_skin_support_threshold="50" -s support_bottom_stair_step_min_slope="10.0" -s wall_line_count="2" -s small_feature_speed_factor_0="50" -s experimental="0" -s bridge_wall_min_length="2.1" -s prime_tower_position_x="298.4" -s raft_interface_thickness="0.2" -s connect_infill_polygons="False" -s interlocking_boundary_avoidance="2" -s material_print_temperature="200" -s min_even_wall_line_width="0.34" -s switch_extruder_retraction_speed="20" -s raft_surface_extruder_nr="0" -s acceleration_roofing="1000" -s retraction_hop_enabled="True" -s material_print_temp_wait="True" -s support_roof_angles="[ ]" -s support_tower_roof_angle="0" -s extruder_prime_pos_z="0" -s acceleration_prime_tower="2000" -s retraction_hop_after_extruder_switch_height="2" -s support_enable="False" -s z_seam_y="240" -s infill_wipe_dist="0" -s bridge_skin_density_3="100" -s support_interface_enable="True" -s support_roof_wall_count="1" -s infill_sparse_density="20" -s infill_extruder_nr="-1" -s bridge_fan_speed="100" -s support_tree_max_diameter="25" -s support_material_flow="100" -s draft_shield_height="10" -s z_seam_x="165.0" -s retraction_combing_max_distance="15" -s machine_always_write_active_tool="False" -s resolution="0" -s support_tower_diameter="3.0" -s infill_support_angle="40" -s adaptive_layer_height_variation_step="0.01" -s raft_surface_jerk="30" -s quality_changes_name="empty" -s machine_nozzle_size="0.4" -s coasting_enable="False" -s support_interface_density="100" -s retraction_hop_only_when_collides="True" -s support_tree_branch_diameter="5" -s machine_steps_per_mm_y="50" -s support_roof_pattern="zigzag" -s support_mesh="False" -s brim_line_count="8" -s support_roof_line_distance="0.4" -s bridge_skin_density="80" -s cool_min_speed="4" -s z_seam_type="sharpest_corner" -s retraction_prime_speed="15" -s cool_min_layer_time_fan_speed_max="11" -s support_conical_min_width="5.0" -s skin_line_width="0.4" -s machine_max_acceleration_x="9000" -s speed_support_interface="30" -s bridge_skin_material_flow_2="95.0" -s z_seam_relative="False" -s cross_support_density_image="" -s material_crystallinity="False" -s support_bottom_distance="0.30000000000000004" -s machine_steps_per_mm_e="1600" -s wall_thickness="0.8" -s prime_tower_position_y="208.39999999999998" -s mesh_position_x="0" -s infill_offset_x="0" -s small_skin_on_surface="False" -s raft_interface_line_width="0.6000000000000001" -s gantry_height="55" -s material_surface_energy="100" -s nozzle_offsetting_for_disallowed_areas="False" -s acceleration_skirt_brim="1000" -s meshfix="0" -s jerk_travel="20" -s retraction_extra_prime_amount="0" -s acceleration_wall_x="1500" -s flow_rate_extrusion_offset_factor="100" -s carve_multiple_volumes="True" -s material_extrusion_cool_down_speed="0.7" -s acceleration_wall_0_roofing="1500" -s machine_max_feedrate_y="300" -s support_roof_material_flow="95.0" -s cool_lift_head="False" -s machine_extruders_share_heater="False" -s speed_wall_0="20" -s machine_max_jerk_xy="20.0" -s cutting_mesh="False" -s conical_overhang_angle="50" -s mesh_position_z="0" -s infill_overlap_mm="0.04" -s support_bottom_stair_step_height="0" -s brim_outside_only="True" -s material_standby_temperature="100" -s wall_0_inset="0" -s relative_extrusion="False" -s min_bead_width="0.34" -s switch_extruder_prime_speed="15" -s wall_x_extruder_nr="-1" -s material_id="empty_material" -s retraction_count_max="25" -s skirt_line_count="1" -s conical_overhang_hole_size="0" -s jerk_travel_enabled="False" -s support_initial_layer_line_distance="0.5" -s meshfix_union_all="True" -s support_z_distance="0.30000000000000004" -s support_bottom_offset="0.8" -s bridge_wall_speed="20" -s switch_extruder_retraction_speeds="20" -s machine_firmware_retract="False" -s raft_surface_acceleration="3500" -s machine_heated_bed="True" -s machine_use_extruder_offset_to_offset_coords="True" -s material_alternate_walls="False" -s material_end_of_filament_purge_length="20" -s acceleration_support_bottom="1000" -s material_break_preparation_speed="2" -s support_tree_min_height_to_model="3" -s support_interface_offset="0.8" -s machine_max_acceleration_y="9000" -s machine_max_acceleration_e="10000" -s speed_ironing="13.333333333333334" -s material_is_support_material="False" -s raft_acceleration="3500" -s machine_extruders_share_nozzle="False" -s bridge_fan_speed_3="50" -s ironing_inset="0.38" -s minimum_roof_area="1.0" -s machine_name="Ultimaker S5" -s jerk_print="20" -s material_no_load_move_factor="0.940860215" -s raft_surface_line_spacing="0.4" -s extruder_prime_pos_y="0" -s material_flow_layer_0="100" -s retraction_combing="no_outer_surfaces" -s wall_material_flow="100" -s raft_speed="15" -s mold_angle="40" -s xy_offset_layer_0="-0.09" -s adaptive_layer_height_enabled="False" -s support_connect_zigzags="True" -s print_bed_temperature="60" -s lightning_infill_support_angle="40" -s raft_margin="15" -s machine_max_jerk_e="5.0" -s small_feature_max_length="0.0" -s skin_overlap_mm="0.08" -s roofing_monotonic="True" -s bottom_thickness="1" -s roofing_material_flow="100" -s line_width="0.4" -s optimize_wall_printing_order="True" -s zig_zaggify_support="True" -s wipe_hop_enable="True" -s draft_shield_height_limitation="full" -s material_flush_purge_speed="0.5" -s wall_distribution_count="1" -s raft_airgap="0.25" -s travel_avoid_other_parts="True" -s machine_nozzle_cool_down_speed="0.8" -s roofing_line_width="0.4" -s material_anti_ooze_retracted_position="-4" -s jerk_print_layer_0="20" -s hole_xy_offset="0" -s support_interface_pattern="zigzag" -s initial_bottom_layers="10" -s bridge_skin_material_flow_3="95.0" -s bridge_fan_speed_2="50" -s material_bed_temperature_layer_0="60" -s support_infill_sparse_thickness="0.1" -s support_roof_height="0.2" -s acceleration_wall_x_roofing="1500" -s support_wall_count="0" -s machine_max_acceleration_z="100" -s skin_edge_support_thickness="0.4" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s bridge_enable_more_layers="False" -s support_bottom_extruder_nr="0" -s material_final_print_temperature="185" -s acceleration_wall_0="1500" -s support_interface_line_width="0.4" -s speed_support_roof="30" -s support_tree_angle_slow="40.0" -s support_bottom_angles="[ ]" -s coasting_min_volume="0.8" -s cool_fan_speed="50" -s top_bottom="0" -s prime_tower_enable="False" -s support_tree_angle="60" -s machine_max_jerk_z="0.4" -s infill_material_flow="100" -s ironing_monotonic="False" -s skirt_brim_line_width="0.4" -s support_infill_rate="80" -s cool_fan_full_at_height="0.2" -s support_brim_enable="True" -s acceleration_support_roof="1000" -s support_roof_offset="0.8" -s wall_0_extruder_nr="-1" -s machine_nozzle_expansion_angle="45" -s min_odd_wall_line_width="0.34" -s machine_gcode_flavor="Griffin" -s jerk_ironing="20" -s meshfix_maximum_deviation="0.04" -s mesh_position_y="0" -s infill_randomize_start_location="False" -s machine_nozzle_head_distance="3" -s support_brim_width="1.2000000000000002" -s speed_wall_x="30" -s time="10:59:54" -s machine_buildplate_type="glass" -s top_layers="10" -s raft_jerk="20" -s bridge_skin_speed_3="20" -s magic_fuzzy_skin_point_dist="0.8" -s speed_support_bottom="30" -s bridge_skin_material_flow="95.0" -s speed_support_infill="30" -s max_extrusion_before_wipe="10" -s raft_base_line_spacing="1.6" -s support_tower_maximum_supported_diameter="3.0" -s nozzle_disallowed_areas="[]" -s support_interface_extruder_nr="0" -s material_shrinkage_percentage_xy="100.2" -s jerk_support_interface="30" -s _plugin__curaenginegradualflow__0_1_0__max_flow_acceleration="1" -s interlocking_beam_width="0.8" -s support_tree_branch_diameter_angle="7" -s conical_overhang_enabled="False" -s min_skin_width_for_expansion="6.123233995736766e-17" -s wall_x_material_flow="100" -s support_pattern="zigzag" -s gradual_infill_steps="0" -s machine_show_variants="False" -s infill_mesh="False" -s layer_height="0.1" -s material_break_preparation_retracted_position="-16" -s wall_transition_filter_distance="100" -s bridge_wall_coast="0" -s wipe_retraction_speed="45" -s retraction_amount="6.5" -s material_break_retracted_position="-50" -s material_initial_print_temperature="190" -s jerk_wall_x="20" -s wall_line_width_x="0.4" -s jerk_support="30" -s machine_min_cool_heat_time_window="15" -s layer_start_x="330.0" -s infill_wall_line_count="0" -s support_supported_skin_fan_speed="100" -s brim_gap="0.14" -s acceleration_support_infill="2000" -s travel="0" -s platform_adhesion="0" -s support_bottom_stair_step_width="5.0" -s jerk_roofing="20" -s wall_0_wipe_dist="0.2" -s skin_outline_count="1" -s jerk_prime_tower="20" -s raft_interface_speed="22.5" -s travel_avoid_distance="3" -s support_meshes_present="False" -s infill_multiplier="1" -s bottom_layers="10" -s infill_offset_y="0" -s magic_fuzzy_skin_thickness="0.3" -s meshfix_extensive_stitching="False" -s flow_rate_max_extrusion_offset="0" -s material_diameter="2.85" -s meshfix_union_all_remove_holes="False" -s alternate_extra_perimeter="False" -s support_roof_enable="True" -s top_bottom_pattern_0="lines" -s skin_monotonic="False" -s meshfix_keep_open_polygons="False" -s prime_blob_enable="False" -s support_tree_tip_diameter="0.8" -s meshfix_fluid_motion_small_distance="0.01" -s gradual_support_infill_steps="2" -s machine_depth="240" -s infill_before_walls="True" -s material="0" -s material_bed_temp_prepend="True" -s min_feature_size="0.1" -s material_flow="100" -s support_offset="0.8" -s top_bottom_extruder_nr="-1" -s lightning_infill_overhang_angle="40" -s ooze_shield_dist="2" -s material_end_of_filament_purge_speed="0.5" -s cool_min_temperature="190" -s jerk_layer_0="20" -s raft_surface_layers="2" -s skirt_brim_minimal_length="250" -s machine_endstop_positive_direction_y="False" -s minimum_bottom_area="1.0" -s infill_line_distance="6.0" -s material_shrinkage_percentage_z="100.1" -s material_guid="" -s bridge_wall_material_flow="100" -s support="0" -s infill_mesh_order="0" -s ironing_pattern="zigzag" -s raft_surface_line_width="0.4" -s lightning_infill_prune_angle="40" -s small_hole_max_size="0" -s wall_line_width="0.4" -s meshfix_fluid_motion_enabled="True" -s connect_skin_polygons="False" -s infill_pattern="triangles" -s speed_print="35" -s bottom_skin_preshrink="0.8" -s sub_div_rad_add="0.4" -s prime_tower_min_volume="6" -s support_tree_rest_preference="graceful" -s material_bed_temperature="60" -s draft_shield_dist="10" -s raft_surface_speed="30" -s speed_layer_0="10.0" -s infill_enable_travel_optimization="False" -s brim_replaces_support="True" -s bridge_skin_speed="20" -s skirt_brim_material_flow="100" -s wall_transition_filter_deviation="0.1" -s material_break_preparation_temperature="200" -s anti_overhang_mesh="False" -s wall_extruder_nr="-1" -s raft_base_acceleration="3500" -s retraction_extrusion_window="1" -s support_fan_enable="False" -s support_interface_height="0.2" -s minimum_interface_area="1.0" -s _plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled="False" -s extruders_enabled_count="2" -s machine_end_gcode="" -s machine_center_is_zero="False" -s support_top_distance="0.30000000000000004" -s retraction_hop_after_extruder_switch="True" -s acceleration_enabled="True" -s support_roof_extruder_nr="0" -s wall_overhang_speed_factor="100" -s jerk_support_infill="30" -s raft_remove_inside_corners="False" -s ironing_only_highest_layer="False" -s acceleration_topbottom="1000" -s machine_settings="0" -s jerk_support_roof="30" -s machine_extruder_count="2" -s wall_0_material_flow_roofing="100" -s infill_angles="[ ]" -s travel_avoid_supports="False" -s acceleration_infill="3500" -s speed_slowdown_layers="1" -s default_material_print_temperature="200" -s roofing_layer_count="1" -s support_extruder_nr="0" -s acceleration_print="3500" -s meshfix_fluid_motion_angle="15" -s top_skin_preshrink="0.8" -s wipe_repeat_count="5" -s meshfix_maximum_resolution="0.5" -s gradual_support_infill_step_height="0.4" -s minimum_polygon_circumference="1.0" -s raft_base_wall_count="1" -s machine_scale_fan_speed_zero_to_one="False" -s skin_angles="[]" -s min_wall_line_width="0.34" -s bridge_settings_enabled="True" -s material_print_temperature_layer_0="200" -s support_use_towers="True" -s inset_direction="outside_in" -s prime_tower_size="20" -s machine_steps_per_mm_x="50" -s meshfix_fluid_motion_shift_distance="0.1" -s wipe_hop_amount="2" -s support_join_distance="2.0" -s print_sequence="all_at_once" -s skin_overlap="20" -s speed_infill="35" -s prime_tower_wipe_enabled="True" -s retraction_hop="2" -s jerk_wall_0="20" -s top_bottom_thickness="1" -s support_tree_max_diameter_increase_by_merges_when_support_to_model="1" -s jerk_infill="20" -s day="Sun" -s wipe_retraction_enable="True" -s support_interface_priority="interface_area_overwrite_support_area" -s support_interface_skip_height="0.1" -s max_skin_angle_for_expansion="90" -s brim_width="3" -s _plugin__curaenginegradualflow__0_1_0__layer_0_max_flow_acceleration="1" -e0 -s speed_prime_tower="30" -s top_bottom_pattern="lines" -s acceleration_print_layer_0="1000" -s speed_travel="150" -s support_tree_limit_branch_reach="True" -s command_line_settings="0" -s wipe_retraction_extra_prime_amount="0" -s jerk_skirt_brim="30" -s support_tree_rest_preference="graceful" -s support_roof_pattern="zigzag" -s clean_between_layers="False" -s coasting_speed="90" -s speed_wall_0_roofing="30" -s roofing_pattern="lines" -s skin_preshrink="1.2000000000000002" -s top_bottom="0" -s speed_roofing="30" -s _plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size="0.2" -s raft_base_fan_speed="0" -s cool_min_layer_time="6" -s group_outer_walls="True" -s layer_0_z_overlap="0.125" -s initial_layer_line_width_factor="100.0" -s raft_surface_thickness="0.1" -s machine_endstop_positive_direction_z="True" -s coasting_volume="0.064" -s raft_interface_fan_speed="50.0" -s raft_interface_jerk="30" -s support_interface_wall_count="1" -s support_interface_angles="[ ]" -s support_roof_density="100" -s raft_base_thickness="0.3" -s conical_overhang_hole_size="0" -s support_line_distance="0.5" -s retraction_enable="True" -s machine_heat_zone_length="16" -s support_skip_zag_per_mm="20" -s dual="0" -s support_bottom_enable="True" -s meshfix_maximum_travel_resolution="0.8" -s ironing_line_spacing="0.1" -s speed_print_layer_0="15.0" -s wall_x_material_flow_layer_0="95.0" -s support_bottom_pattern="zigzag" -s wall_0_material_flow_layer_0="110.00000000000001" -s cool_fan_full_layer="2" -s top_skin_expand_distance="1.2000000000000002" -s roofing_angles="[]" -s switch_extruder_retraction_speeds="20" -s infill="0" -s raft_interface_speed="22.5" -s travel_avoid_distance="3" -s wall_x_material_flow_roofing="100" -s acceleration_support="2000" -s prime_tower_line_width="0.4" -s jerk_wall_x_roofing="30" -s brim_inside_margin="2.5" -s _plugin__curaenginegradualflow__0_1_0__reset_flow_duration="2.0" -s skirt_gap="3" -s machine_steps_per_mm_z="50" -s bridge_sparse_infill_max_density="0" -s experimental="0" -s wall_transition_angle="10" -s raft_base_jerk="30" -s mold_roof_height="0.5" -s mold_width="5" -s jerk_travel_layer_0="30.0" -s skin_material_flow_layer_0="95" -s acceleration_support_interface="1000" -s meshfix_maximum_extrusion_area_deviation="50000" -s wall_0_material_flow="100" -s raft_fan_speed="0" -s machine_extruder_end_pos_x="330" -s support_bottom_wall_count="1" -s jerk_topbottom="30" -s speed_travel_layer_0="150" -s jerk_wall_0_roofing="30" -s magic_fuzzy_skin_enabled="False" -s support_bottom_line_width="0.4" -s jerk_support_bottom="30" -s wipe_move_distance="20" -s cool_fan_speed_min="100" -s extruder_prime_pos_z="2" -s support_tower_roof_angle="0" -s machine_extruder_start_pos_abs="True" -s machine_settings="0" -s acceleration_topbottom="1000" -s support_line_width="0.4" -s material_initial_print_temperature="190" -s material_break_retracted_position="-50" -s support_offset="0.8" -s material_flow="100" -s infill_sparse_thickness="0.1" -s machine_extruders_shared_nozzle_initial_retraction="0" -s extruder_prime_pos_abs="True" -s material_adhesion_tendency="0" -s material_standby_temperature="100" -s brim_outside_only="True" -s support_conical_angle="30" -s mold_enabled="False" -s top_thickness="1.2000000000000002" -s support_xy_distance_overhang="0.2" -s support_xy_distance="0.7" -s speed_wall="30" -s speed="0" -s infill_overlap="10" -s support_interface_material_flow="95.0" -s extruder_nr="0" -s z_seam_position="back" -s skin_material_flow="95.0" -s support_bottom_density="100" -s acceleration_wall_x="1500" -s hole_xy_offset_max_diameter="0" -s jerk_wall="30" -s support_tower_maximum_supported_diameter="3.0" -s support_skip_some_zags="False" -s bridge_skin_speed_2="30" -s speed_z_hop="10" -s material_break_speed="25" -s cooling="0" -s material_flush_purge_length="60" -s raft_interface_line_spacing="0.8" -s machine_nozzle_heat_up_speed="1.6" -s support_bottom_line_distance="0.4" -s brim_smart_ordering="True" -s z_seam_corner="z_seam_corner_none" -s material_anti_ooze_retraction_speed="50" -s support_conical_enabled="False" -s support_tree_bp_diameter="7.5" -s magic_fuzzy_skin_outside_only="False" -s infill_line_width="0.4" -s machine_nozzle_temp_enabled="True" -s material_maximum_park_duration="7200" -s skirt_brim_speed="15.0" -s switch_extruder_retraction_amount="16" -s support_bottom_height="0.2" -s material_is_support_material="False" -s raft_acceleration="3500" -s fill_outline_gaps="True" -s support_zag_skip_count="40" -s wipe_pause="0" -s wipe_retraction_prime_speed="45" -s retraction_prime_speed="45" -s z_seam_type="sharpest_corner" -s acceleration_ironing="1000" -s prime_tower_flow="100" -s ironing_flow="10.0" -s bridge_skin_density_3="100" -s support_interface_enable="True" -s wipe_hop_speed="10" -s bottom_skin_expand_distance="1.2000000000000002" -s inset_direction="outside_in" -s retraction_min_travel="0.8" -s acceleration_layer_0="1000" -s wipe_brush_pos_x="100" -s machine_nozzle_id="AA 0.4" -s acceleration_travel_layer_0="1428.5714285714287" -s speed_equalize_flow_width_factor="110.0" -s support_tree_branch_reach_limit="30" -s xy_offset="-0.010000000000000002" -s material_flow_temp_graph="[[3.5, 200],[7.0, 240]]" -s retract_at_layer_change="False" -s wall_transition_length="0.4" -s slicing_tolerance="middle" -s machine_extruder_end_pos_y="237" -s skin_no_small_gaps_heuristic="False" -s raft_interface_layers="1" -s cross_infill_density_image="" -s support_tree_max_diameter="25" -s bridge_fan_speed="100" -s support_material_flow="100" -s support_brim_line_count="3" -s cool_fan_speed_0="100" -s blackmagic="0" -s infill_support_enabled="False" -s prime_tower_min_volume="6" -s raft_surface_fan_speed="100" -s raft_interface_acceleration="3500" -s support_tree_branch_diameter="5" -s machine_steps_per_mm_y="50" -s small_feature_speed_factor="50" -s zig_zaggify_infill="True" -s retraction_retract_speed="45" -s material_break_temperature="60" -s wipe_retraction_amount="6.5" -s cool_fan_enabled="True" -s cool_fan_speed_max="100" -s wall_overhang_angle="90" -s acceleration_wall="1500" -s ironing_enabled="False" -s acceleration_travel="5000" -s support_bottom_material_flow="95.0" -s minimum_support_area="0.0" -s magic_mesh_surface_mode="normal" -s retraction_speed="45" -s speed_topbottom="30" -s lightning_infill_straightening_angle="40" -s raft_smoothing="5" -s cross_infill_pocket_size="1.7142857142857142" -s support_tree_top_rate="30" -s wall_line_width_0="0.4" -s support_conical_min_width="5.0" -s bridge_skin_support_threshold="50" -s support_bottom_stair_step_min_slope="10.0" -s magic_fuzzy_skin_point_density="1.25" -s wall_line_count="3" -s small_feature_speed_factor_0="50" -s gradual_infill_steps="0" -s wipe_hop_enable="True" -s zig_zaggify_support="True" -s raft_interface_thickness="0.2" -s machine_extruder_start_code="" -s connect_infill_polygons="False" -s material_print_temperature="200" -s min_even_wall_line_width="0.34" -s switch_extruder_retraction_speed="20" -s acceleration_roofing="1000" -s retraction_hop_enabled="True" -s support_roof_angles="[ ]" -s acceleration_prime_tower="2000" -s machine_extruder_end_pos_abs="True" -s retraction_hop_after_extruder_switch_height="2" -s z_seam_y="240" -s speed_wall_x_roofing="30" -s infill_wipe_dist="0" -s resolution="0" -s bridge_skin_density_2="100" -s machine_extruder_start_pos_x="330" -s support_tower_diameter="3.0" -s infill_support_angle="40" -s raft_surface_jerk="30" -s machine_nozzle_size="0.4" -s coasting_enable="False" -s support_interface_density="100" -s machine_feeder_wheel_diameter="10.0" -s retraction_hop_only_when_collides="True" -s brim_line_count="18" -s support_roof_line_distance="0.4" -s machine_nozzle_offset_y="0" -s raft_base_line_width="0.8" -s bridge_skin_density="80" -s cool_min_speed="6" -s retraction_hop="2" -s jerk_wall_0="30" -s cool_min_layer_time_fan_speed_max="11" -s skin_line_width="0.4" -s speed_support_interface="30" -s bridge_skin_material_flow_2="95.0" -s material_anti_ooze_retracted_position="-4" -s jerk_print_layer_0="30" -s hole_xy_offset="0" -s support_interface_pattern="zigzag" -s initial_bottom_layers="12" -s bridge_skin_material_flow_3="95.0" -s bridge_fan_speed_2="100" -s roofing_line_width="0.4" -s material_crystallinity="False" -s support_bottom_distance="0.30000000000000004" -s machine_steps_per_mm_e="1600" -s wall_thickness="1.2000000000000002" -s expand_skins_expand_distance="1.2000000000000002" -s mesh_position_x="0" -s roofing_material_flow="100" -s meshfix_fluid_motion_shift_distance="0.1" -s support_join_distance="2.0" -s wipe_hop_amount="2" -s wipe_retraction_enable="True" -s support_roof_height="0.2" -s support_infill_sparse_thickness="0.1" -s conical_overhang_angle="50" -s mesh_position_z="0" -s infill_overlap_mm="0.04" -s raft_surface_acceleration="3500" -s material_alternate_walls="False" -s material_end_of_filament_purge_length="20" -s acceleration_support_bottom="1000" -s material_break_preparation_speed="50" -s jerk_support_infill="30" -s wall_overhang_speed_factor="100" -s infill_before_walls="True" -s material="0" -s support_interface_skip_height="0.1" -s bridge_enable_more_layers="False" -s speed_ironing="20.0" -s small_skin_width="0.8" -s support_infill_angles="[ ]" -s shell="0" -s bridge_fan_speed_3="100" -s ironing_inset="0.38" -s machine_extruder_cooling_fan_number="0" -s minimum_roof_area="1.0" -s support_top_distance="0.30000000000000004" -s retraction_hop_after_extruder_switch="True" -s jerk_print="30" -s support_connect_zigzags="True" -s xy_offset_layer_0="-0.09" -s material_no_load_move_factor="0.91" -s raft_surface_line_spacing="0.4" -s extruder_prime_pos_y="6" -s material_flow_layer_0="100" -s wall_material_flow="100" -s raft_speed="15" -s mold_angle="40" -s machine_extruder_end_code="" -s meshfix_maximum_deviation="0.04" -s meshfix_fluid_motion_small_distance="0.01" -s gradual_support_infill_steps="2" -s raft_surface_speed="30" -s infill_enable_travel_optimization="False" -s speed_layer_0="15.0" -s skin_edge_support_layers="0" -s retraction_extrusion_window="1" -s support_fan_enable="False" -s machine_extruder_start_pos_y="237" -s infill_offset_x="0" -s small_skin_on_surface="False" -s raft_interface_line_width="0.6000000000000001" -s material_surface_energy="100" -s lightning_infill_support_angle="40" -s small_feature_max_length="0.0" -s skin_overlap_mm="0.08" -s roofing_monotonic="True" -s bottom_thickness="1.2000000000000002" -s switch_extruder_prime_speed="20" -s min_bead_width="0.34" -s line_width="0.4" -s optimize_wall_printing_order="True" -s material_flush_purge_speed="0.5" -s wall_distribution_count="1" -s raft_airgap="0.25" -s travel_avoid_other_parts="True" -s machine_nozzle_cool_down_speed="0.75" -s acceleration_wall_x_roofing="1500" -s gradual_infill_step_height="1.5" -s cool_lift_head="False" -s speed_wall_0="30" -s support_wall_count="0" -s skin_edge_support_thickness="0" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s machine_endstop_positive_direction_x="False" -s material_final_print_temperature="185" -s acceleration_wall_0="1500" -s support_interface_line_width="0.4" -s speed_support_roof="30" -s support_tree_angle_slow="40.0" -s support_bottom_angles="[ ]" -s infill_material_flow="100" -s ironing_monotonic="False" -s center_object="False" -s skirt_brim_line_width="0.4" -s infill_randomize_start_location="False" -s mesh_position_y="0" -s z_seam_x="165.0" -s retraction_combing_max_distance="15" -s support_infill_rate="80" -s cool_fan_full_at_height="0.2" -s support_brim_enable="True" -s acceleration_support_roof="1000" -s support_roof_offset="0.8" -s infill_line_distance="1.7142857142857142" -s minimum_bottom_area="1.0" -s min_odd_wall_line_width="0.34" -s ironing_only_highest_layer="False" -s jerk_support_roof="30" -s wall_0_material_flow_roofing="100" -s support_supported_skin_fan_speed="100" -s infill_wall_line_count="0" -s jerk_roofing="30" -s machine_nozzle_head_distance="3" -s support_brim_width="1.2000000000000002" -s top_layers="12" -s raft_jerk="30" -s bridge_skin_speed_3="30" -s magic_fuzzy_skin_point_dist="0.8" -s min_skin_width_for_expansion="7.34788079488412e-17" -s wall_x_material_flow="100" -s lightning_infill_prune_angle="40" -s raft_surface_line_width="0.4" -s support_tree_angle="60" -s speed_support="30" -s jerk_support_interface="30" -s support_roof_wall_count="1" -s infill_sparse_density="70" -s support_bottom_stair_step_height="0" -s _plugin__curaenginegradualflow__0_1_0__max_flow_acceleration="1" -s speed_support_bottom="30" -s acceleration_wall_0_roofing="1500" -s material_extrusion_cool_down_speed="0.7" -s interlocking_beam_width="0.8" -s support_tree_branch_diameter_angle="7" -s conical_overhang_enabled="False" -s support_xy_overrides_z="z_overrides_xy" -s min_infill_area="0" -s machine_nozzle_tip_outer_diameter="1.0" -s support_pattern="zigzag" -s speed_print="30" -s material_break_preparation_retracted_position="-16" -s retraction_count_max="25" -s skirt_line_count="1" -s wall_transition_filter_distance="100" -s bridge_wall_coast="0" -s raft_margin="15" -s material_end_of_filament_purge_speed="0.5" -s wipe_retraction_speed="45" -s retraction_amount="6.5" -s min_wall_line_width="0.34" -s support="0" -s jerk_wall_x="30" -s wall_line_width_x="0.4" -s jerk_support="30" -s machine_min_cool_heat_time_window="15" -s layer_start_x="330.0" -s support_roof_line_width="0.4" -s brim_gap="0.14" -s acceleration_support_infill="2000" -s travel="0" -s coasting_min_volume="0.8" -s cool_fan_speed="100" -s platform_adhesion="0" -s support_bottom_stair_step_width="5.0" -s support_roof_material_flow="95.0" -s speed_wall_x="30" -s min_feature_size="0.1" -s switch_extruder_extra_prime_amount="0" -s cool_min_temperature="190" -s jerk_layer_0="30" -s raft_surface_layers="2" -s skirt_brim_minimal_length="250" -s machine_endstop_positive_direction_y="False" -s material_guid="44a029e6-e31b-4c9e-a12f-9282e29a92ff" -s bridge_wall_material_flow="100" -s bridge_skin_material_flow="95.0" -s speed_support_infill="30" -s max_extrusion_before_wipe="10" -s raft_base_line_spacing="1.6" -s support_angle="60" -s raft_base_speed="15" -s ironing_pattern="zigzag" -s skin_monotonic="False" -s meshfix_keep_open_polygons="False" -s support_tree_tip_diameter="0.8" -s prime_blob_enable="False" -s small_hole_max_size="0" -s support_z_distance="0.30000000000000004" -s meshfix_union_all="True" -s wall_line_width="0.4" -s bridge_wall_speed="30" -s support_bottom_offset="0.8" -s jerk_travel="30" -s skin_outline_count="1" -s jerk_prime_tower="30" -s bottom_skin_preshrink="1.2000000000000002" -s sub_div_rad_add="0.4" -s support_initial_layer_line_distance="0.5" -s raft_base_acceleration="3500" -s support_interface_height="0.2" -s minimum_interface_area="1.0" -s _plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled="False" -s brim_replaces_support="True" -s bridge_skin_speed="30" -s skirt_brim_material_flow="100" -s meshfix_fluid_motion_enabled="True" -s infill_pattern="triangles" -s connect_skin_polygons="False" -s wall_transition_filter_deviation="0.1" -s material_break_preparation_temperature="210" -s support_tree_min_height_to_model="3" -s meshfix="0" -s acceleration_skirt_brim="1000" -s support_interface_offset="0.8" -s infill_angles="[ ]" -s travel_avoid_supports="False" -s acceleration_infill="3500" -s default_material_print_temperature="200" -s roofing_layer_count="1" -s extruder_prime_pos_x="-3" -s layer_start_y="228.0" -s lightning_infill_overhang_angle="40" -s wall_0_wipe_dist="0.2" -s multiple_mesh_overlap="0" -s wipe_retraction_retract_speed="45" -s acceleration_print="3500" -s skirt_height="3" -s top_skin_preshrink="1.2000000000000002" -s meshfix_fluid_motion_angle="15" -s wipe_repeat_count="5" -s meshfix_maximum_resolution="0.5" -s gradual_support_infill_step_height="0.4" -s machine_nozzle_offset_x="0" -s retraction_extra_prime_amount="0" -s machine_steps_per_mm_x="50" -s material_print_temperature_layer_0="200" -s support_use_towers="True" -s skin_angles="[]" -s skin_overlap="20" -s speed_infill="30" -s prime_tower_wipe_enabled="True" -s top_bottom_thickness="1.2000000000000002" -s support_tree_max_diameter_increase_by_merges_when_support_to_model="1" -s jerk_infill="30" -s infill_multiplier="1" -s bottom_layers="12" -s infill_offset_y="0" -s magic_fuzzy_skin_thickness="0.3" -s meshfix_extensive_stitching="False" -s material_diameter="2.85" -s meshfix_union_all_remove_holes="False" -s alternate_extra_perimeter="False" -s support_roof_enable="True" -s top_bottom_pattern_0="lines" -s max_skin_angle_for_expansion="90" -s z_seam_relative="False" -s cross_support_density_image="" -s wall_0_inset="0" -s brim_width="7" -s _plugin__curaenginegradualflow__0_1_0__layer_0_max_flow_acceleration="1" -s jerk_ironing="30" -e1 -s speed_prime_tower="30" -s top_bottom_pattern="lines" -s acceleration_print_layer_0="1000" -s speed_travel="150" -s support_tree_limit_branch_reach="True" -s command_line_settings="0" -s wipe_retraction_extra_prime_amount="0" -s jerk_skirt_brim="30" -s support_tree_rest_preference="graceful" -s support_roof_pattern="zigzag" -s clean_between_layers="False" -s coasting_speed="90" -s speed_wall_0_roofing="30" -s roofing_pattern="lines" -s skin_preshrink="1.2000000000000002" -s top_bottom="0" -s speed_roofing="30" -s _plugin__curaenginegradualflow__0_1_0__gradual_flow_discretisation_step_size="0.2" -s raft_base_fan_speed="0" -s cool_min_layer_time="6" -s group_outer_walls="True" -s layer_0_z_overlap="0.125" -s initial_layer_line_width_factor="100.0" -s raft_surface_thickness="0.1" -s machine_endstop_positive_direction_z="True" -s coasting_volume="0.064" -s raft_interface_fan_speed="50.0" -s raft_interface_jerk="30" -s support_interface_wall_count="1" -s support_interface_angles="[ ]" -s support_roof_density="100" -s raft_base_thickness="0.3" -s conical_overhang_hole_size="0" -s support_line_distance="0.5" -s retraction_enable="True" -s machine_heat_zone_length="16" -s support_skip_zag_per_mm="20" -s dual="0" -s support_bottom_enable="True" -s meshfix_maximum_travel_resolution="0.8" -s ironing_line_spacing="0.1" -s speed_print_layer_0="15.0" -s wall_x_material_flow_layer_0="95.0" -s support_bottom_pattern="zigzag" -s wall_0_material_flow_layer_0="110.00000000000001" -s cool_fan_full_layer="2" -s top_skin_expand_distance="1.2000000000000002" -s roofing_angles="[]" -s switch_extruder_retraction_speeds="20" -s infill="0" -s raft_interface_speed="22.5" -s travel_avoid_distance="3" -s wall_x_material_flow_roofing="100" -s acceleration_support="2000" -s prime_tower_line_width="0.4" -s jerk_wall_x_roofing="30" -s brim_inside_margin="2.5" -s _plugin__curaenginegradualflow__0_1_0__reset_flow_duration="2.0" -s skirt_gap="3" -s machine_steps_per_mm_z="50" -s bridge_sparse_infill_max_density="0" -s experimental="0" -s wall_transition_angle="10" -s raft_base_jerk="30" -s mold_roof_height="0.5" -s mold_width="5" -s jerk_travel_layer_0="30.0" -s skin_material_flow_layer_0="95" -s acceleration_support_interface="1000" -s meshfix_maximum_extrusion_area_deviation="50000" -s wall_0_material_flow="100" -s raft_fan_speed="0" -s machine_extruder_end_pos_x="330" -s support_bottom_wall_count="1" -s jerk_topbottom="30" -s speed_travel_layer_0="150" -s jerk_wall_0_roofing="30" -s magic_fuzzy_skin_enabled="False" -s support_bottom_line_width="0.4" -s jerk_support_bottom="30" -s wipe_move_distance="20" -s cool_fan_speed_min="100" -s extruder_prime_pos_z="2" -s support_tower_roof_angle="0" -s machine_extruder_start_pos_abs="True" -s machine_settings="0" -s acceleration_topbottom="1000" -s support_line_width="0.4" -s material_initial_print_temperature="190" -s material_break_retracted_position="-50" -s support_offset="0.8" -s material_flow="100" -s infill_sparse_thickness="0.1" -s machine_extruders_shared_nozzle_initial_retraction="0" -s extruder_prime_pos_abs="True" -s material_adhesion_tendency="0" -s material_standby_temperature="100" -s brim_outside_only="True" -s support_conical_angle="30" -s mold_enabled="False" -s top_thickness="1.2000000000000002" -s support_xy_distance_overhang="0.2" -s support_xy_distance="0.7" -s speed_wall="30" -s speed="0" -s infill_overlap="10" -s support_interface_material_flow="95.0" -s extruder_nr="1" -s z_seam_position="back" -s skin_material_flow="95.0" -s support_bottom_density="100" -s acceleration_wall_x="1500" -s hole_xy_offset_max_diameter="0" -s jerk_wall="30" -s support_tower_maximum_supported_diameter="3.0" -s support_skip_some_zags="False" -s bridge_skin_speed_2="30" -s speed_z_hop="10" -s material_break_speed="25" -s cooling="0" -s material_flush_purge_length="60" -s raft_interface_line_spacing="0.8" -s machine_nozzle_heat_up_speed="1.6" -s support_bottom_line_distance="0.4" -s brim_smart_ordering="True" -s z_seam_corner="z_seam_corner_none" -s material_anti_ooze_retraction_speed="50" -s support_conical_enabled="False" -s support_tree_bp_diameter="7.5" -s magic_fuzzy_skin_outside_only="False" -s infill_line_width="0.4" -s machine_nozzle_temp_enabled="True" -s material_maximum_park_duration="7200" -s skirt_brim_speed="15.0" -s switch_extruder_retraction_amount="16" -s support_bottom_height="0.2" -s material_is_support_material="False" -s raft_acceleration="3500" -s fill_outline_gaps="True" -s support_zag_skip_count="40" -s wipe_pause="0" -s wipe_retraction_prime_speed="45" -s retraction_prime_speed="45" -s z_seam_type="sharpest_corner" -s acceleration_ironing="1000" -s prime_tower_flow="100" -s ironing_flow="10.0" -s bridge_skin_density_3="100" -s support_interface_enable="True" -s wipe_hop_speed="10" -s bottom_skin_expand_distance="1.2000000000000002" -s inset_direction="outside_in" -s retraction_min_travel="0.8" -s acceleration_layer_0="1000" -s wipe_brush_pos_x="100" -s machine_nozzle_id="AA 0.4" -s acceleration_travel_layer_0="1428.5714285714287" -s speed_equalize_flow_width_factor="110.0" -s support_tree_branch_reach_limit="30" -s xy_offset="-0.010000000000000002" -s material_flow_temp_graph="[[3.5, 200],[7.0, 240]]" -s retract_at_layer_change="False" -s wall_transition_length="0.4" -s slicing_tolerance="middle" -s machine_extruder_end_pos_y="219" -s skin_no_small_gaps_heuristic="False" -s raft_interface_layers="1" -s cross_infill_density_image="" -s support_tree_max_diameter="25" -s bridge_fan_speed="100" -s support_material_flow="100" -s support_brim_line_count="3" -s cool_fan_speed_0="100" -s blackmagic="0" -s infill_support_enabled="False" -s prime_tower_min_volume="6" -s raft_surface_fan_speed="100" -s raft_interface_acceleration="3500" -s support_tree_branch_diameter="5" -s machine_steps_per_mm_y="50" -s small_feature_speed_factor="50" -s zig_zaggify_infill="True" -s retraction_retract_speed="45" -s material_break_temperature="60" -s wipe_retraction_amount="6.5" -s cool_fan_enabled="True" -s cool_fan_speed_max="100" -s wall_overhang_angle="90" -s acceleration_wall="1500" -s ironing_enabled="False" -s acceleration_travel="5000" -s support_bottom_material_flow="95.0" -s minimum_support_area="0.0" -s magic_mesh_surface_mode="normal" -s retraction_speed="45" -s speed_topbottom="30" -s lightning_infill_straightening_angle="40" -s raft_smoothing="5" -s cross_infill_pocket_size="1.7142857142857142" -s support_tree_top_rate="30" -s wall_line_width_0="0.4" -s support_conical_min_width="5.0" -s bridge_skin_support_threshold="50" -s support_bottom_stair_step_min_slope="10.0" -s magic_fuzzy_skin_point_density="1.25" -s wall_line_count="3" -s small_feature_speed_factor_0="50" -s gradual_infill_steps="0" -s wipe_hop_enable="True" -s zig_zaggify_support="True" -s raft_interface_thickness="0.2" -s machine_extruder_start_code="" -s connect_infill_polygons="False" -s material_print_temperature="200" -s min_even_wall_line_width="0.34" -s switch_extruder_retraction_speed="20" -s acceleration_roofing="1000" -s retraction_hop_enabled="True" -s support_roof_angles="[ ]" -s acceleration_prime_tower="2000" -s machine_extruder_end_pos_abs="True" -s retraction_hop_after_extruder_switch_height="2" -s z_seam_y="240" -s speed_wall_x_roofing="30" -s infill_wipe_dist="0" -s resolution="0" -s bridge_skin_density_2="100" -s machine_extruder_start_pos_x="330" -s support_tower_diameter="3.0" -s infill_support_angle="40" -s raft_surface_jerk="30" -s machine_nozzle_size="0.4" -s coasting_enable="False" -s support_interface_density="100" -s machine_feeder_wheel_diameter="10.0" -s retraction_hop_only_when_collides="True" -s brim_line_count="18" -s support_roof_line_distance="0.4" -s machine_nozzle_offset_y="0" -s raft_base_line_width="0.8" -s bridge_skin_density="80" -s cool_min_speed="6" -s retraction_hop="2" -s jerk_wall_0="30" -s cool_min_layer_time_fan_speed_max="11" -s skin_line_width="0.4" -s speed_support_interface="30" -s bridge_skin_material_flow_2="95.0" -s material_anti_ooze_retracted_position="-4" -s jerk_print_layer_0="30" -s hole_xy_offset="0" -s support_interface_pattern="zigzag" -s initial_bottom_layers="12" -s bridge_skin_material_flow_3="95.0" -s bridge_fan_speed_2="100" -s roofing_line_width="0.4" -s material_crystallinity="False" -s support_bottom_distance="0.30000000000000004" -s machine_steps_per_mm_e="1600" -s wall_thickness="1.2000000000000002" -s expand_skins_expand_distance="1.2000000000000002" -s mesh_position_x="0" -s roofing_material_flow="100" -s meshfix_fluid_motion_shift_distance="0.1" -s support_join_distance="2.0" -s wipe_hop_amount="2" -s wipe_retraction_enable="True" -s support_roof_height="0.2" -s support_infill_sparse_thickness="0.1" -s conical_overhang_angle="50" -s mesh_position_z="0" -s infill_overlap_mm="0.04" -s raft_surface_acceleration="3500" -s material_alternate_walls="False" -s material_end_of_filament_purge_length="20" -s acceleration_support_bottom="1000" -s material_break_preparation_speed="50" -s jerk_support_infill="30" -s wall_overhang_speed_factor="100" -s infill_before_walls="True" -s material="0" -s support_interface_skip_height="0.1" -s bridge_enable_more_layers="False" -s speed_ironing="20.0" -s small_skin_width="0.8" -s support_infill_angles="[ ]" -s shell="0" -s bridge_fan_speed_3="100" -s ironing_inset="0.38" -s machine_extruder_cooling_fan_number="0" -s minimum_roof_area="1.0" -s support_top_distance="0.30000000000000004" -s retraction_hop_after_extruder_switch="True" -s jerk_print="30" -s support_connect_zigzags="True" -s xy_offset_layer_0="-0.09" -s material_no_load_move_factor="0.91" -s raft_surface_line_spacing="0.4" -s extruder_prime_pos_y="6" -s material_flow_layer_0="100" -s wall_material_flow="100" -s raft_speed="15" -s mold_angle="40" -s machine_extruder_end_code="" -s meshfix_maximum_deviation="0.04" -s meshfix_fluid_motion_small_distance="0.01" -s gradual_support_infill_steps="2" -s raft_surface_speed="30" -s infill_enable_travel_optimization="False" -s speed_layer_0="15.0" -s skin_edge_support_layers="0" -s retraction_extrusion_window="1" -s support_fan_enable="False" -s machine_extruder_start_pos_y="219" -s infill_offset_x="0" -s small_skin_on_surface="False" -s raft_interface_line_width="0.6000000000000001" -s material_surface_energy="100" -s lightning_infill_support_angle="40" -s small_feature_max_length="0.0" -s skin_overlap_mm="0.08" -s roofing_monotonic="True" -s bottom_thickness="1.2000000000000002" -s switch_extruder_prime_speed="20" -s min_bead_width="0.34" -s line_width="0.4" -s optimize_wall_printing_order="True" -s material_flush_purge_speed="0.5" -s wall_distribution_count="1" -s raft_airgap="0.25" -s travel_avoid_other_parts="True" -s machine_nozzle_cool_down_speed="0.75" -s acceleration_wall_x_roofing="1500" -s gradual_infill_step_height="1.5" -s cool_lift_head="False" -s speed_wall_0="30" -s support_wall_count="0" -s skin_edge_support_thickness="0" -s mesh_rotation_matrix="[[1,0,0], [0,1,0], [0,0,1]]" -s machine_endstop_positive_direction_x="False" -s material_final_print_temperature="185" -s acceleration_wall_0="1500" -s support_interface_line_width="0.4" -s speed_support_roof="30" -s support_tree_angle_slow="40.0" -s support_bottom_angles="[ ]" -s infill_material_flow="100" -s ironing_monotonic="False" -s center_object="False" -s skirt_brim_line_width="0.4" -s infill_randomize_start_location="False" -s mesh_position_y="0" -s z_seam_x="165.0" -s retraction_combing_max_distance="15" -s support_infill_rate="80" -s cool_fan_full_at_height="0.2" -s support_brim_enable="True" -s acceleration_support_roof="1000" -s support_roof_offset="0.8" -s infill_line_distance="1.7142857142857142" -s minimum_bottom_area="1.0" -s min_odd_wall_line_width="0.34" -s ironing_only_highest_layer="False" -s jerk_support_roof="30" -s wall_0_material_flow_roofing="100" -s support_supported_skin_fan_speed="100" -s infill_wall_line_count="0" -s jerk_roofing="30" -s machine_nozzle_head_distance="3" -s support_brim_width="1.2000000000000002" -s top_layers="12" -s raft_jerk="30" -s bridge_skin_speed_3="30" -s magic_fuzzy_skin_point_dist="0.8" -s min_skin_width_for_expansion="7.34788079488412e-17" -s wall_x_material_flow="100" -s lightning_infill_prune_angle="40" -s raft_surface_line_width="0.4" -s support_tree_angle="60" -s speed_support="30" -s jerk_support_interface="30" -s support_roof_wall_count="1" -s infill_sparse_density="70" -s support_bottom_stair_step_height="0" -s _plugin__curaenginegradualflow__0_1_0__max_flow_acceleration="1" -s speed_support_bottom="30" -s acceleration_wall_0_roofing="1500" -s material_extrusion_cool_down_speed="0.7" -s interlocking_beam_width="0.8" -s support_tree_branch_diameter_angle="7" -s conical_overhang_enabled="False" -s support_xy_overrides_z="z_overrides_xy" -s min_infill_area="0" -s machine_nozzle_tip_outer_diameter="1.0" -s support_pattern="zigzag" -s speed_print="30" -s material_break_preparation_retracted_position="-16" -s retraction_count_max="25" -s skirt_line_count="1" -s wall_transition_filter_distance="100" -s bridge_wall_coast="0" -s raft_margin="15" -s material_end_of_filament_purge_speed="0.5" -s wipe_retraction_speed="45" -s retraction_amount="6.5" -s min_wall_line_width="0.34" -s support="0" -s jerk_wall_x="30" -s wall_line_width_x="0.4" -s jerk_support="30" -s machine_min_cool_heat_time_window="15" -s layer_start_x="330.0" -s support_roof_line_width="0.4" -s brim_gap="0.14" -s acceleration_support_infill="2000" -s travel="0" -s coasting_min_volume="0.8" -s cool_fan_speed="100" -s platform_adhesion="0" -s support_bottom_stair_step_width="5.0" -s support_roof_material_flow="95.0" -s speed_wall_x="30" -s min_feature_size="0.1" -s switch_extruder_extra_prime_amount="0" -s cool_min_temperature="190" -s jerk_layer_0="30" -s raft_surface_layers="2" -s skirt_brim_minimal_length="250" -s machine_endstop_positive_direction_y="False" -s material_guid="44a029e6-e31b-4c9e-a12f-9282e29a92ff" -s bridge_wall_material_flow="100" -s bridge_skin_material_flow="95.0" -s speed_support_infill="30" -s max_extrusion_before_wipe="10" -s raft_base_line_spacing="1.6" -s support_angle="60" -s raft_base_speed="15" -s ironing_pattern="zigzag" -s skin_monotonic="False" -s meshfix_keep_open_polygons="False" -s support_tree_tip_diameter="0.8" -s prime_blob_enable="False" -s small_hole_max_size="0" -s support_z_distance="0.30000000000000004" -s meshfix_union_all="True" -s wall_line_width="0.4" -s bridge_wall_speed="30" -s support_bottom_offset="0.8" -s jerk_travel="30" -s skin_outline_count="1" -s jerk_prime_tower="30" -s bottom_skin_preshrink="1.2000000000000002" -s sub_div_rad_add="0.4" -s support_initial_layer_line_distance="0.5" -s raft_base_acceleration="3500" -s support_interface_height="0.2" -s minimum_interface_area="1.0" -s _plugin__curaenginegradualflow__0_1_0__gradual_flow_enabled="False" -s brim_replaces_support="True" -s bridge_skin_speed="30" -s skirt_brim_material_flow="100" -s meshfix_fluid_motion_enabled="True" -s infill_pattern="triangles" -s connect_skin_polygons="False" -s wall_transition_filter_deviation="0.1" -s material_break_preparation_temperature="210" -s support_tree_min_height_to_model="3" -s meshfix="0" -s acceleration_skirt_brim="1000" -s support_interface_offset="0.8" -s infill_angles="[ ]" -s travel_avoid_supports="False" -s acceleration_infill="3500" -s default_material_print_temperature="200" -s roofing_layer_count="1" -s extruder_prime_pos_x="333" -s layer_start_y="228.0" -s lightning_infill_overhang_angle="40" -s wall_0_wipe_dist="0.2" -s multiple_mesh_overlap="0" -s wipe_retraction_retract_speed="45" -s acceleration_print="3500" -s skirt_height="3" -s top_skin_preshrink="1.2000000000000002" -s meshfix_fluid_motion_angle="15" -s wipe_repeat_count="5" -s meshfix_maximum_resolution="0.5" -s gradual_support_infill_step_height="0.4" -s machine_nozzle_offset_x="22" -s retraction_extra_prime_amount="0" -s machine_steps_per_mm_x="50" -s material_print_temperature_layer_0="200" -s support_use_towers="True" -s skin_angles="[]" -s skin_overlap="20" -s speed_infill="30" -s prime_tower_wipe_enabled="True" -s top_bottom_thickness="1.2000000000000002" -s support_tree_max_diameter_increase_by_merges_when_support_to_model="1" -s jerk_infill="30" -s infill_multiplier="1" -s bottom_layers="12" -s infill_offset_y="0" -s magic_fuzzy_skin_thickness="0.3" -s meshfix_extensive_stitching="False" -s material_diameter="2.85" -s meshfix_union_all_remove_holes="False" -s alternate_extra_perimeter="False" -s support_roof_enable="True" -s top_bottom_pattern_0="lines" -s max_skin_angle_for_expansion="90" -s z_seam_relative="False" -s cross_support_density_image="" -s wall_0_inset="0" -s brim_width="7" -s _plugin__curaenginegradualflow__0_1_0__layer_0_max_flow_acceleration="1" -s jerk_ironing="30" -g -e0 -l "0" -s extruder_nr="0"
2023-11-26 10:59:55,414 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] 
2023-11-26 10:59:55,414 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2023-11-26 10:59:55.413] [info] Progress: start accomplished in 2.4080276489257812e-05s
2023-11-26 10:59:55,415 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2023-11-26 10:59:55.413] [info] Starting slice...
2023-11-26 10:59:55,415 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2023-11-26 10:59:55.413] [info] Slicing model...
2023-11-26 10:59:55,431 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2023-11-26 10:59:55.431] [info] Slice of mesh took 0.01775503158569336 seconds
2023-11-26 10:59:55,473 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2023-11-26 10:59:55.473] [info] Make polygons took 0.04176497459411621 seconds
2023-11-26 10:59:55,474 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2023-11-26 10:59:55.473] [info] Progress: slice accomplished in 0.06067705154418945s
2023-11-26 10:59:55,474 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2023-11-26 10:59:55.473] [info] Starting layerparts...
2023-11-26 10:59:55,509 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2023-11-26 10:59:55.509] [info] Progress: layerparts accomplished in 0.03537893295288086s
2023-11-26 10:59:55,510 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2023-11-26 10:59:55.509] [info] Starting inset+skin...
2023-11-26 10:59:58,201 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2023-11-26 10:59:58.200] [info] Progress: inset+skin accomplished in 2.691190004348755s
2023-11-26 10:59:58,201 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2023-11-26 10:59:58.200] [info] Starting support...
2023-11-26 10:59:58,333 - DEBUG - [MainThread] UM3NetworkPrinting.src.Cloud.CloudOutputDeviceManager._onGetRemoteClustersFinished [169]: Synced cloud printers with account.
2023-11-26 10:59:58,395 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2023-11-26 10:59:58.395] [info] Progress: support accomplished in 0.19499611854553223s
2023-11-26 10:59:58,396 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2023-11-26 10:59:58.395] [info] Starting export...
2023-11-26 11:00:00,336 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2023-11-26 11:00:00.335] [warning] Failing to discretize parabola! Must add an apex or one of the endpoints.
2023-11-26 11:00:03,310 - DEBUG - [MainThread] cura.AutoSave._onTimeout [64]: Autosaving preferences, instances and profiles took 0.0596010684967041 seconds
2023-11-26 11:00:04,479 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2023-11-26 11:00:04.478] [info] Progress: export accomplished in 6.083350896835327s
2023-11-26 11:00:04,481 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2023-11-26 11:00:04.478] [info] Sending 299 layers.
2023-11-26 11:00:04,481 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2023-11-26 11:00:04.479] [info] Total time elapsed 9.065930128097534s.
2023-11-26 11:00:04,482 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] 
2023-11-26 11:00:04,510 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2023-11-26 11:00:04.509] [info] Print time (s): 21209
2023-11-26 11:00:04,510 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2023-11-26 11:00:04.509] [info] Print time (hr|min|s): 5h 53m 29s
2023-11-26 11:00:04,510 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2023-11-26 11:00:04.509] [info] Filament (mm^3): 23290
2023-11-26 11:00:04,765 - DEBUG - [EngineOutputThread] UM.Backend.Backend._backendLog [140]: [Backend] [2023-11-26 11:00:04.765] [info] Closing connection.
2023-11-26 11:00:04,796 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [831]: Slicing took 10.466158866882324 seconds
2023-11-26 11:00:04,797 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [832]: Number of models per buildplate: {0: 1}
2023-11-26 11:00:04,798 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onSlicingFinishedMessage [846]: See if there is more to slice...
2023-11-26 11:00:04,799 - DEBUG - [JobQueueWorker [6]] CuraEngineBackend.ProcessSlicedLayersJob.run [74]: Processing new layer for build plate 0...
2023-11-26 11:00:05,312 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [240]: Socket state changed to Closing
2023-11-26 11:00:05,313 - DEBUG - [MainThread] UM.Backend.Backend._onSocketError [264]: Socket debug: Arcus Error (13): Closing socket because other side requested close.
2023-11-26 11:00:05,314 - DEBUG - [MainThread] UM.Backend.Backend._logSocketState [242]: Socket state changed to Closed
2023-11-26 11:00:05,331 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onBackendQuit [1032]: Backend finished slicing. Resetting process and socket.
2023-11-26 11:00:05,369 - DEBUG - [JobQueueWorker [6]] CuraEngineBackend.ProcessSlicedLayersJob.run [254]: Processing layers took 0.5694241523742676 seconds
2023-11-26 11:00:05,460 - DEBUG - [MainThread] CuraEngineBackend.CuraEngineBackend._onProcessLayersFinished [1071]: See if there is more to slice(2)...
2023-11-26 11:00:10,070 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [444]: file:///Applications/UltiMaker Cura.app/Contents/MacOS/share/cura/resources/qml/Menus/ContextMenu.qml:39:9: QML MenuItem: Binding loop detected for property "contentWidth"
2023-11-26 11:00:11,291 - WARNING - [MainThread] UM.Qt.QtApplication.__onQmlWarning [444]: file:///Applications/UltiMaker Cura.app/Contents/MacOS/share/cura/resources/qml/Menus/ContextMenu.qml:39:9: QML MenuItem: Binding loop detected for property "contentWidth"
2023-11-26 11:00:59,723 - DEBUG - [MainThread] UM3NetworkPrinting.src.Cloud.CloudOutputDeviceManager._onGetRemoteClustersFinished [169]: Synced cloud printers with account.
2023-11-26 11:02:02,552 - DEBUG - [MainThread] UM3NetworkPrinting.src.Cloud.CloudOutputDeviceManager._onGetRemoteClustersFinished [169]: Synced cloud printers with account.
2023-11-26 11:03:03,365 - DEBUG - [MainThread] UM3NetworkPrinting.src.Cloud.CloudOutputDeviceManager._onGetRemoteClustersFinished [169]: Synced cloud printers with account.
2023-11-26 11:04:04,467 - DEBUG - [MainThread] UM3NetworkPrinting.src.Cloud.CloudOutputDeviceManager._onGetRemoteClustersFinished [169]: Synced cloud printers with account.
2023-11-26 11:05:04,503 - DEBUG - [MainThread] UM3NetworkPrinting.src.Cloud.CloudOutputDeviceManager._onGetRemoteClustersFinished [169]: Synced cloud printers with account.
2023-11-26 11:06:04,463 - DEBUG - [MainThread] UM3NetworkPrinting.src.Cloud.CloudOutputDeviceManager._onGetRemoteClustersFinished [169]: Synced cloud printers with account.
2023-11-26 11:07:05,766 - DEBUG - [MainThread] UM3NetworkPrinting.src.Cloud.CloudOutputDeviceManager._onGetRemoteClustersFinished [169]: Synced cloud printers with account.
2023-11-26 11:08:06,255 - DEBUG - [MainThread] cura.OAuth2.AuthorizationHelpers.getAccessTokenUsingRefreshToken [64]: Refreshing the access token for [https://account.ultimaker.com]
2023-11-26 11:08:06,260 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.refreshAccessToken [174]: Was already busy refreshing token. Do not start a new request.
2023-11-26 11:08:06,265 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.refreshAccessToken [174]: Was already busy refreshing token. Do not start a new request.
2023-11-26 11:08:06,373 - DEBUG - [MainThread] UM3NetworkPrinting.src.Cloud.CloudOutputDeviceManager._onGetRemoteClustersFinished [169]: Synced cloud printers with account.
2023-11-26 11:08:06,727 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._storeAuthData [289]: Attempting to store the auth data for [https://account.ultimaker.com]
2023-11-26 11:08:16,261 - DEBUG - [MainThread] cura.AutoSave._onTimeout [64]: Autosaving preferences, instances and profiles took 0.014739036560058594 seconds
2023-11-26 11:09:06,776 - DEBUG - [MainThread] UM3NetworkPrinting.src.Cloud.CloudOutputDeviceManager._onGetRemoteClustersFinished [169]: Synced cloud printers with account.
2023-11-26 11:10:07,703 - DEBUG - [MainThread] UM3NetworkPrinting.src.Cloud.CloudOutputDeviceManager._onGetRemoteClustersFinished [169]: Synced cloud printers with account.
2023-11-26 11:11:08,450 - DEBUG - [MainThread] UM3NetworkPrinting.src.Cloud.CloudOutputDeviceManager._onGetRemoteClustersFinished [169]: Synced cloud printers with account.
2023-11-26 11:12:08,451 - DEBUG - [MainThread] UM3NetworkPrinting.src.Cloud.CloudOutputDeviceManager._onGetRemoteClustersFinished [169]: Synced cloud printers with account.
2023-11-26 11:13:08,342 - DEBUG - [MainThread] UM3NetworkPrinting.src.Cloud.CloudOutputDeviceManager._onGetRemoteClustersFinished [169]: Synced cloud printers with account.
2023-11-26 11:14:08,602 - DEBUG - [MainThread] UM3NetworkPrinting.src.Cloud.CloudOutputDeviceManager._onGetRemoteClustersFinished [169]: Synced cloud printers with account.
2023-11-26 11:15:08,481 - DEBUG - [MainThread] UM3NetworkPrinting.src.Cloud.CloudOutputDeviceManager._onGetRemoteClustersFinished [169]: Synced cloud printers with account.
2023-11-26 11:16:08,390 - DEBUG - [MainThread] UM3NetworkPrinting.src.Cloud.CloudOutputDeviceManager._onGetRemoteClustersFinished [169]: Synced cloud printers with account.
2023-11-26 11:17:08,277 - DEBUG - [MainThread] cura.OAuth2.AuthorizationHelpers.getAccessTokenUsingRefreshToken [64]: Refreshing the access token for [https://account.ultimaker.com]
2023-11-26 11:17:08,284 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.refreshAccessToken [174]: Was already busy refreshing token. Do not start a new request.
2023-11-26 11:17:08,289 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.refreshAccessToken [174]: Was already busy refreshing token. Do not start a new request.
2023-11-26 11:17:08,763 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._storeAuthData [289]: Attempting to store the auth data for [https://account.ultimaker.com]
2023-11-26 11:17:08,959 - DEBUG - [MainThread] UM3NetworkPrinting.src.Cloud.CloudOutputDeviceManager._onGetRemoteClustersFinished [169]: Synced cloud printers with account.
2023-11-26 11:17:19,260 - DEBUG - [MainThread] cura.AutoSave._onTimeout [64]: Autosaving preferences, instances and profiles took 0.02089405059814453 seconds
2023-11-26 11:18:10,343 - DEBUG - [MainThread] UM3NetworkPrinting.src.Cloud.CloudOutputDeviceManager._onGetRemoteClustersFinished [169]: Synced cloud printers with account.
2023-11-26 11:19:10,726 - DEBUG - [MainThread] UM3NetworkPrinting.src.Cloud.CloudOutputDeviceManager._onGetRemoteClustersFinished [169]: Synced cloud printers with account.
2023-11-26 11:20:11,633 - DEBUG - [MainThread] UM3NetworkPrinting.src.Cloud.CloudOutputDeviceManager._onGetRemoteClustersFinished [169]: Synced cloud printers with account.
2023-11-26 11:21:12,702 - DEBUG - [MainThread] UM3NetworkPrinting.src.Cloud.CloudOutputDeviceManager._onGetRemoteClustersFinished [169]: Synced cloud printers with account.
2023-11-26 11:22:16,276 - DEBUG - [MainThread] UM3NetworkPrinting.src.Cloud.CloudOutputDeviceManager._onGetRemoteClustersFinished [169]: Synced cloud printers with account.
2023-11-26 11:23:16,981 - DEBUG - [MainThread] UM3NetworkPrinting.src.Cloud.CloudOutputDeviceManager._onGetRemoteClustersFinished [169]: Synced cloud printers with account.
2023-11-26 11:24:17,376 - DEBUG - [MainThread] UM3NetworkPrinting.src.Cloud.CloudOutputDeviceManager._onGetRemoteClustersFinished [169]: Synced cloud printers with account.
2023-11-26 11:25:17,846 - DEBUG - [MainThread] UM3NetworkPrinting.src.Cloud.CloudOutputDeviceManager._onGetRemoteClustersFinished [169]: Synced cloud printers with account.
2023-11-26 11:26:21,549 - DEBUG - [MainThread] cura.OAuth2.AuthorizationHelpers.getAccessTokenUsingRefreshToken [64]: Refreshing the access token for [https://account.ultimaker.com]
2023-11-26 11:26:21,558 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.refreshAccessToken [174]: Was already busy refreshing token. Do not start a new request.
2023-11-26 11:26:21,577 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.refreshAccessToken [174]: Was already busy refreshing token. Do not start a new request.
2023-11-26 11:26:21,581 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.refreshAccessToken [174]: Was already busy refreshing token. Do not start a new request.
2023-11-26 11:26:21,648 - DEBUG - [MainThread] UM3NetworkPrinting.src.Cloud.CloudOutputDeviceManager._onGetRemoteClustersFinished [169]: Synced cloud printers with account.
2023-11-26 11:26:22,138 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._storeAuthData [289]: Attempting to store the auth data for [https://account.ultimaker.com]
2023-11-26 11:26:32,333 - DEBUG - [MainThread] cura.AutoSave._onTimeout [64]: Autosaving preferences, instances and profiles took 0.06842494010925293 seconds
2023-11-26 11:27:22,627 - DEBUG - [MainThread] UM3NetworkPrinting.src.Cloud.CloudOutputDeviceManager._onGetRemoteClustersFinished [169]: Synced cloud printers with account.
2023-11-26 11:28:23,470 - DEBUG - [MainThread] UM3NetworkPrinting.src.Cloud.CloudOutputDeviceManager._onGetRemoteClustersFinished [169]: Synced cloud printers with account.
2023-11-26 11:29:27,706 - DEBUG - [MainThread] UM3NetworkPrinting.src.Cloud.CloudOutputDeviceManager._onGetRemoteClustersFinished [169]: Synced cloud printers with account.
2023-11-26 11:30:27,732 - DEBUG - [MainThread] UM3NetworkPrinting.src.Cloud.CloudOutputDeviceManager._onGetRemoteClustersFinished [169]: Synced cloud printers with account.
2023-11-26 11:31:28,081 - DEBUG - [MainThread] UM3NetworkPrinting.src.Cloud.CloudOutputDeviceManager._onGetRemoteClustersFinished [169]: Synced cloud printers with account.
2023-11-26 11:32:28,708 - DEBUG - [MainThread] UM3NetworkPrinting.src.Cloud.CloudOutputDeviceManager._onGetRemoteClustersFinished [169]: Synced cloud printers with account.
2023-11-26 11:33:28,609 - DEBUG - [MainThread] UM3NetworkPrinting.src.Cloud.CloudOutputDeviceManager._onGetRemoteClustersFinished [169]: Synced cloud printers with account.
2023-11-26 11:34:28,608 - DEBUG - [MainThread] UM3NetworkPrinting.src.Cloud.CloudOutputDeviceManager._onGetRemoteClustersFinished [169]: Synced cloud printers with account.
2023-11-26 11:35:28,624 - DEBUG - [MainThread] cura.OAuth2.AuthorizationHelpers.getAccessTokenUsingRefreshToken [64]: Refreshing the access token for [https://account.ultimaker.com]
2023-11-26 11:35:28,732 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.refreshAccessToken [174]: Was already busy refreshing token. Do not start a new request.
2023-11-26 11:35:28,737 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.refreshAccessToken [174]: Was already busy refreshing token. Do not start a new request.
2023-11-26 11:35:29,128 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._storeAuthData [289]: Attempting to store the auth data for [https://account.ultimaker.com]
2023-11-26 11:35:29,226 - DEBUG - [MainThread] UM3NetworkPrinting.src.Cloud.CloudOutputDeviceManager._onGetRemoteClustersFinished [169]: Synced cloud printers with account.
2023-11-26 11:35:41,296 - DEBUG - [MainThread] cura.AutoSave._onTimeout [64]: Autosaving preferences, instances and profiles took 0.15738415718078613 seconds
2023-11-26 11:36:29,500 - DEBUG - [MainThread] UM3NetworkPrinting.src.Cloud.CloudOutputDeviceManager._onGetRemoteClustersFinished [169]: Synced cloud printers with account.
2023-11-26 11:37:30,732 - DEBUG - [MainThread] UM3NetworkPrinting.src.Cloud.CloudOutputDeviceManager._onGetRemoteClustersFinished [169]: Synced cloud printers with account.
2023-11-26 11:38:30,404 - DEBUG - [MainThread] UM3NetworkPrinting.src.Cloud.CloudOutputDeviceManager._onGetRemoteClustersFinished [169]: Synced cloud printers with account.
2023-11-26 11:39:30,369 - DEBUG - [MainThread] UM3NetworkPrinting.src.Cloud.CloudOutputDeviceManager._onGetRemoteClustersFinished [169]: Synced cloud printers with account.
2023-11-26 11:40:30,428 - DEBUG - [MainThread] UM3NetworkPrinting.src.Cloud.CloudOutputDeviceManager._onGetRemoteClustersFinished [169]: Synced cloud printers with account.
2023-11-26 11:41:31,466 - DEBUG - [MainThread] UM3NetworkPrinting.src.Cloud.CloudOutputDeviceManager._onGetRemoteClustersFinished [169]: Synced cloud printers with account.
2023-11-26 11:42:31,425 - DEBUG - [MainThread] UM3NetworkPrinting.src.Cloud.CloudOutputDeviceManager._onGetRemoteClustersFinished [169]: Synced cloud printers with account.
2023-11-26 11:43:31,728 - DEBUG - [MainThread] UM3NetworkPrinting.src.Cloud.CloudOutputDeviceManager._onGetRemoteClustersFinished [169]: Synced cloud printers with account.
2023-11-26 11:44:30,745 - DEBUG - [MainThread] cura.OAuth2.AuthorizationHelpers.getAccessTokenUsingRefreshToken [64]: Refreshing the access token for [https://account.ultimaker.com]
2023-11-26 11:44:31,388 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._storeAuthData [289]: Attempting to store the auth data for [https://account.ultimaker.com]
2023-11-26 11:44:32,353 - DEBUG - [MainThread] UM3NetworkPrinting.src.Cloud.CloudOutputDeviceManager._onGetRemoteClustersFinished [169]: Synced cloud printers with account.
2023-11-26 11:44:45,344 - DEBUG - [MainThread] cura.AutoSave._onTimeout [64]: Autosaving preferences, instances and profiles took 0.05319666862487793 seconds
2023-11-26 11:45:32,323 - DEBUG - [MainThread] UM3NetworkPrinting.src.Cloud.CloudOutputDeviceManager._onGetRemoteClustersFinished [169]: Synced cloud printers with account.
2023-11-26 11:46:32,331 - DEBUG - [MainThread] UM3NetworkPrinting.src.Cloud.CloudOutputDeviceManager._onGetRemoteClustersFinished [169]: Synced cloud printers with account.
2023-11-26 11:47:33,697 - DEBUG - [MainThread] UM3NetworkPrinting.src.Cloud.CloudOutputDeviceManager._onGetRemoteClustersFinished [169]: Synced cloud printers with account.
2023-11-26 11:48:33,582 - DEBUG - [MainThread] UM3NetworkPrinting.src.Cloud.CloudOutputDeviceManager._onGetRemoteClustersFinished [169]: Synced cloud printers with account.
2023-11-26 11:49:33,316 - DEBUG - [MainThread] UM3NetworkPrinting.src.Cloud.CloudOutputDeviceManager._onGetRemoteClustersFinished [169]: Synced cloud printers with account.
2023-11-26 11:50:33,539 - DEBUG - [MainThread] UM3NetworkPrinting.src.Cloud.CloudOutputDeviceManager._onGetRemoteClustersFinished [169]: Synced cloud printers with account.
2023-11-26 11:51:33,670 - DEBUG - [MainThread] UM3NetworkPrinting.src.Cloud.CloudOutputDeviceManager._onGetRemoteClustersFinished [169]: Synced cloud printers with account.
2023-11-26 11:52:34,407 - DEBUG - [MainThread] UM3NetworkPrinting.src.Cloud.CloudOutputDeviceManager._onGetRemoteClustersFinished [169]: Synced cloud printers with account.
2023-11-26 11:53:35,215 - DEBUG - [MainThread] cura.OAuth2.AuthorizationHelpers.getAccessTokenUsingRefreshToken [64]: Refreshing the access token for [https://account.ultimaker.com]
2023-11-26 11:53:35,222 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.refreshAccessToken [174]: Was already busy refreshing token. Do not start a new request.
2023-11-26 11:53:35,227 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService.refreshAccessToken [174]: Was already busy refreshing token. Do not start a new request.
2023-11-26 11:53:35,517 - DEBUG - [MainThread] UM3NetworkPrinting.src.Cloud.CloudOutputDeviceManager._onGetRemoteClustersFinished [169]: Synced cloud printers with account.
2023-11-26 11:53:35,775 - DEBUG - [MainThread] cura.OAuth2.AuthorizationService._storeAuthData [289]: Attempting to store the auth data for [https://account.ultimaker.com]
2023-11-26 11:53:51,153 - DEBUG - [MainThread] cura.AutoSave._onTimeout [64]: Autosaving preferences, instances and profiles took 0.02704000473022461 seconds
2023-11-26 11:54:43,808 - DEBUG - [MainThread] UM3NetworkPrinting.src.Cloud.CloudOutputDeviceManager._onGetRemoteClustersFinished [169]: Synced cloud printers with account.
2023-11-26 11:55:44,523 - DEBUG - [MainThread] UM3NetworkPrinting.src.Cloud.CloudOutputDeviceManager._onGetRemoteClustersFinished [169]: Synced cloud printers with account.
2023-11-26 11:56:44,499 - DEBUG - [MainThread] UM3NetworkPrinting.src.Cloud.CloudOutputDeviceManager._onGetRemoteClustersFinished [169]: Synced cloud printers with account.
2023-11-26 11:57:34,208 - DEBUG - [MainThread] cura.AutoSave._onTimeout [64]: Autosaving preferences, instances and profiles took 0.017459869384765625 seconds

alnavasa

Posts

Joined

Last visited

Content Type

Forums

Events

3D Prints

Posts posted by alnavasa

Unstable Wifi S5 Printer

Wrong settings on default profile

Wrong settings on default profile

Layer expansion printing PC

Wrong settings on default profile

Wrong settings on default profile

Wrong settings on default profile

Replacing the printhead cable?

Cura crashing when MacBook goes to sleep

Ultimaker S5 R1 Electronics Glue?

Material station use for multi color print

Thoughts about the Ultimaker S5

Ultimaker S5 R1 Electronics Glue?

Ultimaker S5 R1 Electronics Glue?

Ultimaker S5 R1 Electronics Glue?

Less plugins show up when logged in

Printing with Ultimaker PC

Cura crashing when MacBook goes to sleep

Ultimaker S5 Camera stream not viewable

UM S5 stopping during 3d printing BASF CF15 filament.

Cura crashing when MacBook goes to sleep

Cura crashing when MacBook goes to sleep

Cura crashing when MacBook goes to sleep

Cura crashing when MacBook goes to sleep

Cura crashing when MacBook goes to sleep

Browse

Activity