Jump to content

silvio-tidu

Dormant
  • Content Count

    10
  • Joined

  • Last visited

Community Reputation

0 Neutral
  1. Hi guys, Anyone of you can help me? These are pictures of the print https://imagizer.imageshack.us/v2/719x539q90/903/5BMnfg.jpg https://imagizer.imageshack.us/v2/719x539q90/537/m2aPW3.jpg I'm going crazy! I tried them all but I can not avoid this. To make this print I followed the advice in this post: http://umforum.ultimaker.com/index.php?/topic/4210-getting-started-settings-tips-to-nice-prints/ the settings I used are: Material: Colorfabb pla/pha standard white. Combing off Retraction minimun travel 5.5 Minimal extrusion before retracting: 0 Travel speed 250 Head temp: 210 Print speed: 30 mm/s Layer height: 0.1 Fill density 20 Shell 0.8 After I tried to print only the surface without filling, with the same parameters but with a layer height of 0.06 and the result was also terrible: https://imagizer.imageshack.us/v2/719x539q90/661/BWXQNI.jpg Tips?
  2. Hi! I'm a new UM2 user, and I'm trying to understand what are the limits of print quality. Cause I would like to use the printer to obtain good prototypes, I'm trying to figure out what are the best settings in this case to obtain small texts. This text it's very small and this is the first print whit cura high quality default settings This one with layer height of 0.06 and the last it's 0.04 and i've increased the temp. to 230° these are the last settings: anyone of you with a lot of patience can help me to get best quality print settings?
  3. Hi! I'm a new UM2 user, there is something i can do to prevent this sort of flikering? it's a problem that occurs especially on curved edges.
  4. Thanks to all, now i have a new motor that works fine... and i've finally started to print. :grin:
  5. Thanks to your support, we found the problem. It's the y stepper, there seems to be something broken inside. Now I will talk with the customer support, do you think it is better to send me a new motor or send him back all to have a better check.
  6. seems that the x motor stepper don't move. It's not the belt, I've also checked the cables from the motor to the motherboard and they looks fine. Is there anything else I can do?
  7. :( It's a solvable problem? Alternatively I am forced to return the printer, it's still under warranty. (I really hope not to have to do this, I do not know how quickly they can solve the problem and shipments seem to me a lottery of fortune)
  8. I slid the head to the bottom and to the left, I clearly heard two clicks. This happens when i start from the center And this happens when i start from the bottom/right and push the print button 'm really frustrated
  9. Hi there, I've a big trouble with my new UM2 arrived today. it's really sad that it has not even been able to print my first robot :angry: I follow the manual but from the "first time startup" the head seems to go in the wrong way, probably don't recognize the home position. I tried to reset all and reinstall the firmware but the problem occurs again. I also checked the switches and seems to click well See the video to understand better. Any suggestion? Silvio
×
×
  • Create New...

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!