ksn-arts

wooooow i want this ! please make it in cura ^))))

i have two type plastic 3mm and 2,85 The diameter of the tunes in the printer. when replaced plastic.top botom 0.7 mm. were you enter in cura v 14.07 filament diamter???

thanks for info

atomic method???

no i have only innofil... :(((

i have innofil 3d diametr 2,85 mm

Hello ! the upper plastic layer. the distance between the lines of plastic. how to fix it? layer height 0.2. fill 25 percent. top thickness of 0.7 printing speed 35 / Plastic PLA inofil 3d 3mm. I tried to Increase flow of material to 105 %...temp 225C :( thanks

black copy (happy family) ))

Thanks i setup from 55 to 48 mm

hello I printed the two claws of a scorpion, first printed 1claws. one desktop printing the second claw steel tube bottom, from the print head knocks rips model first .... I pressed pause model took off from the table... print gcode download https://vk.com/doc12074792_321219833?hash=ae69cb70e31ef4ce78&dl=13d7b5baf0d8038a97

thank you for plastic igo3d.ru #ultimaker2 #3dprint and special thanks to Konstantin Denis Fedorenko from Salekhard for help too! ultimaker 2 team i love you! not very good paint....

Thanks I'll post later 3d model for download.

when I use thread 3mm hear as the motor supply a ticking sound/ sometime . I played around with different parameters settings. I , raised the temperature to 220 and reduced the flow from 100 to 90 percent. max speed at which I worked with this thick plastic 45 - 50 mm a second, but low speed it's better.30-25 mm sec..so I do not know. work with this plastic. or do not use it when... I have a 2.85 mm plastic....

hot air extractor is connected and running. beautiful lighting. system is powered separately from the electricity charge your cell phone samsung.

Well that's all ready idea of hot air removal system become a reality a few hours.thanks to 3D printing and Ultimaker-2

I think that the thick filament, there must be other options flow parameters....

thank you I did so, I care about this plastic flow parameters

ay somebody!people where you? :-P