ksn-arts

Hi all ....in my room sometimes very warm above 30 degrees Celsius. I noticed that at the bottom, where there is a micro computer board printer, too much heat at the bottom. and little air movement. within two days, I developed a system of heat blowing from under the printer. this device I called the "polar wind". it works on the fan from USB. and is designed for installation at the bottom of the printer. blowing hot air into the side of the board micro computer. air cooling system for the printer.tomorrow I will start printing 3d... 3d modeling idea and development Sergey Kolesnik

Friends, please give me recommendations for working with plastic 3 mm. Flow material, print speed, temperature and speed of the cooling fans, retractoins I think it is not worth printing at fast speeds? thank you!

wooww!

thank you! I forgot about it I guess.

Good afternoon. after the new firmware update through cura 14.07. Fans strange work. they count the percentage of the height. The lower table is lowered the more powerful they work. is that a glitch? a new feature or automatic? noticed that yesterday's video

and if you use 100 fill plastic? You can escape the rat holes? cracks

Thanks!

if you make the glasses. from it you can drink? not hot drinks? this plastic is suitable for products of Food?

i use 0,18 big model long print time /Thank you! I'm probably going to buy plastic from ultimaker

Thanks! how fix it "So overall, it looks like a very non-uniform material flow." ?

Hello all! plastic is very hard, quickly cools. sometimes formed on the walls of hanging icicles hanging thread. I raised the temperature to 215 degrees. print speed of 35 mm sec. sometimes it twists above. forms bumps, obstacles and micro lifting. nozzle touches him and pulls desktop model and shaking. I tried to increase the retraction settings. to 5.5 m and then lowered to 4.5 mm. how to escape from it?say you need to try Z-lift function? possible on UM2 3D printer? or look now my favorite plastic from ultimaker

in this version of the test, they do not move, they are glued. yes I think still tint and stick decals. he taped durable good in 3 layers painted I just always careful

thanks aerosol spray paint

Sorry no this series of my works of authorship 3d robots insects...you can buy ready. painted

hello body and all legs part)

Thanks! I 3d artist but I am a lawyer by training )) my site http://www.gzone.ru/. I dream to create a series of toys. very long time waiting this wonderful 3d printer.

:-P

and I also have a kitten running around everywhere:)))

thank,and dust from the floor? you did a filter?

and if the coil placed on the floor? thread running smoothly into the extruder?

Thanks maybe it rubs against the casing string with black wire? you do yourself an alternate mechanism extruder or work with a standard?

sometimes the engine makes a strange sound when retracting. is this normal? print speed is not high and 30 mm s 15 mm sec print small objects.Friends tell me what all the same temperature table is optimal for printing small items and objects from plastic Pla. i use 60 c