Jump to content
Ultimaker Community of 3D Printing Experts

marcel-klapwijk

Dormant
  • Content Count

    6
  • Joined

  • Last visited

    Never

Community Reputation

0 Neutral

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

  1. I don't seem to be able to create a proper bill of materials, all linefeeds seem to be removed. This (https://www.youmagine.com/designs/low-friction-um2-spoolholder-endcap#!design-materials): The endcap: - 608_endcap Parts from Low friction UM2 spoolholder by IRobertI (https://www.youmagine.com/designs/low-friction-um2-spoolholder'>https://www.youmagine.com/designs/low-friction-um2-spoolholder): - 608_core1 - 608_core2 - 608_mount - 608_nut - 608_spacer (-2mm) Parts from hardwarestore e.g. Praxis.nl: - 1x m8 100mm bolt (Censys laagbolkopschroef) - 4x washers - 2x 608 bearing
  2. Do you have a link to that test print objects, gr5?
  3. Eldrick, thanks. But are there any drawbacks from using RepRap instead of UltiGCode?
  4. I'm still trying different settings, but am already using the following printed fan duct, which improved the print on the right side significantly: - https://www.youmagine.com/designs/fanduct-another-idea Furthermore I'm using cheap hairspray to keep the print fixated on the glass bed.
  5. If a problem with the insulator is handled by the firmware or slicer, than it probably would increase the amount of warranty claims by people using custom firmwares and slicers. Which would be not so good publicity, in a place (the internet) where people start complaining after waiting for 6 week and 4 hours on a product with a 6-8 week lead time...
  6. Isn't this a bit backwards? Why would one want to remove the convenience of the ability of storing temperature settings from within the slicer? Now, with Cura, it is impossible for prints, which need special temperatures, to be stored within the file. Does the same apply for the bed temperature, is that also adjustable from within non-cura gcode?
×
×
  • Create New...