Jump to content

neverend

Dormant
  • Content Count

    2
  • Joined

  • Last visited

    Never

Community Reputation

0 Neutral
  1. Thank you for you response. Now that I know the name of the issue I can start searching for solutions. As for the temperature - I'm using the standard temperature profile for PLA (from the printer). I've removed the white filament I was using and it seems there was a clog in the extruder - changing it cleaned it and I did a good print afterwards. I will look for a solution to have the spool/loose filament somewhere below the printer as I see it's a popular way to avoid underextrusions. Do different color filaments behave in different ways during printing? Matte versus translucent, white vs black ?
  2. Hello guys, This is my first post here and unfortunately it's with an issue. It started last night during a 10 hour print: https://www.dropbox.com/s/sxryglbjkiq8eot/IMG_1632%20copy.jpg As you can see, there are a few distorted layers and the piece broke in half when I removed it. I re-calibrated the bed, tried a new print (http://www.thingiverse.com/thing:265525/#files) and again the same problem as you can see below: https://www.dropbox.com/s/49s70ykop6al257/IMG_1630%20copy.jpg https://www.dropbox.com/s/yej0pg6h298j8rw/IMG_1631%20copy.jpg print speed: 50mm/s layer height: 0.1 mm fill: 15% Any thoughts on this? Thank you
×
×
  • Create New...

Important Information

Welcome to the Ultimaker Community of 3D printing experts. Visit the following links to read more about our Terms of Use or our Privacy Policy. Thank you!