reject
-
Posts
6 -
Joined
-
Last visited
Content Type
Forums
Events
3D Prints
Posts posted by reject
-
-
Hello guys,
My printer is definitely working as before :-P i didnt know you have improved the coupler, and i was thinking on getting this replace
http://www.aliexpress.com/item/-/1959140480.html
But obviously i prefer the fiberglass one :mrgreen:
-
Hello again,
I had to drill a 4mm hole, the deformation inside was like 4.1-4.2mm.
Its printing right now, and im seeing a great difference, its printing almost like the old days! hope its fixed!
Thanks everyone!
-
2 Pictures of the bottom:
-
Thank you lRobertl & gr5.
The 3rd fan is ok, it works fine as always. Also, i always put the bowden tube with your screw method IRobertI, if i dont do this, it only prints like 20 seconds.
gr5 your idea of making a 3mm drill was my next move, the teflon part is, as you said, a bit deformed on the heated side, i cant even pull it out. Pushing some virging filament feels with a hell of friction, thats the reason i blamed the teflon.
I will try the drill next, lets see what happens. Thank you!
-
Hi people,
Im having a lot of problems with my UM2, it started 1 month ago, now its impossible to make a single piece. I checked a lot of threads and used your advises but now im just lost, nothing worked.
The print start normally, but passed 2 o 3 min, it starts to and the filament clogs. When i pull the filament after this, there are always a ball bigger than the tube.
I did the atomic method, and the filament is always damaged, no matter the times i do ( last time i did like 10 times and the result after 4-5 was the same).
I used a 0,3mm hypoalergenic needle to clean the nozzle, but nothing changed.
I tried to eliminate the tension on the feeder using just 1m of filament, but the tension is not here.
I thing my teflon coupler is the responsible of this,
sorry for my english :(
Any ideas?
Hemera extruder to UM2 or UM2+... anyone?
in Third party products & modifications
Posted
Hello TheGrine, im interested in this configuration, could you please give me feedback of the configuration?
Did you have STL for the mount?